• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.8
• /
• pp.509-516
• /
• 2004

The concerns of distributed generations including photovoltaic(PV) system have been increased around the world since PV system is becoming widespread as a clean and gentle energy source for earth. In the future high density grid-connected PV systems will be interconnected with distribution network. As a result, the stability and long-term reliability of PV systems have become more important issues in this area. Grid-connected PV systems have been installed and monitored at field demonstration test center(FDTC) and also data acquisition system(DAS) has been constructed for measuring and analyzing performance of PV system to observe the overall effect of environmental conditions on their operation characteristics. The performance of PV system has been evaluated and analyzed for component perspective (PV array and power conditioning system) and global perspective (system efficiency, capacity factor, and electrical power energy) by field test and loss factors of PV system.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.17 no.5
• /
• pp.377-387
• /
• 2012

A single-phase grid-connected PV system is known as suitable for housing of less than 3 kW. The DC link voltage in a single-phase PV system has necessarily twice component of fundamental wave. It makes high THD in the grid current. According to the problem, power quality is lower. Many engineers have studied about this problem. The most simple method is to use low pass filter on DC link voltage control. However it is affected by DC link voltage control bandwidth. If cutoff frequency is reduced to increase the performance of low pass filter, it also lowers DC link voltage control bandwidth. Second method is using band stop filter, it works good on steady state but not good on transient state. This paper proposes the new method for removing ripple voltage to get an exact current reference. It improves the responses on steady state and transient state. The performance was verified through computer simulation using MATLAB and actual experiments.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.2
• /
• pp.299-306
• /
• 1999

Considers the problem to update the spanning tree and strongly-connected components in response to topology change of the network. This paper proposes a distributed algorithm that solves such a problem after several processors and links are added and deleted. Its message complexity and its ideal-time complexity are O(n'log n'+ (n'+s+t)) and O(n'logn') respectively where n'is the number of processors in the network after the topology change, s is the number of added links, and t is the total number of links in the strongly connected component (of the network before the topology change) including the deleted links.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1187-1189
• /
• 2002

In the case of an existing high frequency inverter is became forced extinction by quick load change, due to be connected with series inductor on switch, it is destroyed or is generated conduction loss by resistance component in reactor. And, In the operation of high current with a soft switching, conduction loss can not neglect. In this paper, for the high current power source, we make sure of soft swtching operation and reducing surge when the forced extinction by using a connected switch with series inductor. Also, we poropos a topology of the half bridge type high frequency inverter that can be realized high amplitude operation of the load current. And, analyze the circuit to decide an opmtial circuit parameter.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2787-2794
• /
• 2011

A mesh node, a component of a mesh network, is connected with the network by dynamic routing using routing protocol and collects the information of adjacent or connected mesh nodes for its self-management and settings. Also, it relays packets between the mesh nodes and provides AP(Access Point) with its corresponding functions based on IEEE 802.11 a/b/g for clients' access to the network. In this paper, the study focused on the design and performance tests of Wireless Mesh Network(WMN) which is applied to the wireless communication network for the CBTC(Communications Based Train Control) system. The WMN was established on a K-AGT test-line (Kyeongsan city, Gyeongsangbuk-do), and to verify the applicability, its operation and performances are checked by measuring the data throughput, delay latency, quality measurements such as transmission loss, radio interference and path recovery and setup between the on-board and wayside.

• International Journal of Advanced Culture Technology
• /
• v.4 no.1
• /
• pp.37-50
• /
• 2016

In recent years, the development and application of green energy resources have attracted more and more /$^*$ 'tention of people. The training room presented here is focused on the terminal applications of a photovoltaic power generation system (PPGS). Through introducing the composition and the general design principles, we aimed at leading the students to master the fundamental skills required for its design, installation and construction. The training room consists of numerous platforms, such as: PPGS, Wind and Photovoltaic Hybrid Power Generation Systems, Wind Power Generation Equipments, Simulative Grid-Connected Power Generation System, Electronic Technology Application of New Energy, etc. This enables the students to obtain their project and professional skills training via assembling, adjusting, maintaining and inspecting, etc., various component parts of the photovoltaic and new energy power generation systems, to further grasp the fundamental and related theoretical knowledge, and to further reinforce their practical and operational skills, so as to improve their problem-analyzing and problem-solving abilities.

• Journal of Digital Convergence
• /
• v.11 no.8
• /
• pp.213-218
• /
• 2013

In this paper, when vehicle inspection is made, the check way is recommended based on the intelligent and personalized in the workplace, education, and other space-time according to the current situation. These results increase productivity, reduce costs, and improve performance. So we designed vehicle inspection recommendation system using ontology. Recommendation method is that components connected concept are shown according to weight value. if components are connected with other concept, the components are extended.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.1
• /
• pp.163-170
• /
• 2001

In this paper, a massless link model transmitting external forces is developed to achieve the numerical efficiency in simulation of vehicle suspension systems. Forces acting on links are resolved and transmitted to attached points with a quasi-static assumption. Also, a theoretical derivation and computer implementation of a massless link with bushing elements are proposed. In the massless link with bushing elements, one end is connected to the adjacent body with bushings and the other end is connected with a spherical joint. The deformation of a massless link with bushing elements is theoretically determined by minimizing the potential energy function with quasi-static equilibrium assumption at each time step. Several simulations with a full vehicle model are carried out to compare the efficiency of the developed massless link component. From the results, it is concluded that the proposed approach can reduce the computational time considerably.

• Journal of Power Electronics
• /
• v.14 no.2
• /
• pp.324-340
• /
• 2014

Recent developments in power electronics technology have spurred interest in the use of renewable energy sources as distributed generation (DG) generators. The key component in DG generators is a grid-connected inverter that serves as an effective interface between the renewable energy source and the utility grid. The multifunctional inverter (MFI) is special type of grid-connected inverter that has elicited much attention in recent years. MFIs not only generate power for DGs but also provide increased functionality through improved power quality and voltage and reactive power support; thus, the capability of the auxiliary service for the utility grid is improved. This paper presents a comprehensive review of the various MFI system configurations for single-phase (two-wire) and three-phase (three- or four-wire) systems and control strategies for the compensation of different power quality problems. The advances in practical applications and recent research on MFIs are presented through a review of nearly 200 papers.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.6
• /
• pp.1652-1663
• /
• 1997

This paper proposes a distinction algorithm of Korean and English characters which can be applied to multi-font from the results of thinning. The proposed algorithm distinguishes Korean and English characters as the number of connected components. If it can not distinguish those characters with the number of connected component, it distinguishes them as the vowel included in Korean characters. In experimental results, the distinction rate is about 99.82% for the 21,150 characters of three widely used fonts.