• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권1호
• /
• pp.1-13
• /
• 2014

A new 5-MW floating offshore wind turbine moored by a spring-tensioned-leg was proposed for installation in about 50m water depth. Its substructure is a platform of the inverted conical cylinder type with massive ballast weight plate at the bottom. A 1:128 scale model was built for the preliminary engineering development. The model tests in waves and wind were carried out to estimate motion characteristics of this platform in the Ocean Engineering Wide Tank of the University of Ulsan. Its motions were measured and the RAOs were compared. The proposed floating offshore wind turbine showed a good stability and decent responses in waves, wind and operation of the wind turbine.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제38권
• /
• pp.31.1-31.7
• /
• 2016

Background: The objective of this retrospective study was to show results from platform-switched narrow-diameter implants in the posterior edentulous region, which we followed up for more than 1 year after functional loading. Methods: Ninety-eight narrow implants were inserted into 66 patients. After healing, fixed implant-supported prostheses were delivered to the patients, and Periotest and radiographic examinations were performed. After the first year of loading, the implant outcome was again evaluated clinically and radiographically using the Periotest analysis. Crestal bone loss and Periotest values (PTVs) were used to evaluate the effect of surgery, prosthesis, implant, and a host-related factor. A general linear model was used to statistically detect variables statistically associated with crestal bone loss and Periotest value. Results: We followed up on the implants over 1 to 4 years after loading; their survival rate was 100 %, and pronounced differences from PTVs were noted among jaw location, bone quality, and loading period. No difference was detected in bone loss among the variables studied. Bone loss after functional loading was $0.14{\pm}0.39mm$. The stability value from the Periotest was $-3.29{\pm}0.50$. Conclusions: Within the limitations of this study, judicious use of platform-switched narrow implants with a conical connection must be considered an alternative for wide-diameter implants to restore a posterior edentulous region.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.526-544
• /
• 2021

Based on the potential flow theory, a fully nonlinear numerical procedure is developed with boundary element method to analyze the interaction between a fixed semi-submersible platform and incident waves in open water. The incident wave is separated from the scattered wave under fully nonlinear boundary conditions. The mixed Euler-Lagrangian method is used to capture the position of the disturbed wave surface in local coordinate systems. The wave forces exerted on an inverted conical frustum are used to ensure the accuracy of the present method and good agreements with published results are obtained. The hydrodynamic characteristics of the semi-submersible platform interacting with regular waves are analyzed. Pressure distribution with time and space, tension and compression of the platform under wave action are investigated. 3D behaviors of wave run-ups are predicted. Strong nonlinear phenomena such as wave upwelling and wave interference are observed and analyzed.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.297-313
• /
• 2020

An Arctic Spar is characterized by its conical shape near the waterline. In this case, the nonlinear effects from its irregular hull shape would be significant if there is either a large amplitude floater motion or steep wave conditions. Therefore, in this paper, the nonlinear effects of an Arctic Spar are numerically investigated by introducing a weakly nonlinear time-domain model that considers the time dependent hydrostatic restoring stiffness and Froude-Krylov forces. Through numerical simulations under multiple regular and irregular wave conditions, the nonlinear behavior of the Arctic Spar is clearly observed, but it is not shown in the linear analysis. In particular, it is found that the nonlinear Froude-Krylov force plays an important role when the wave frequency is close to the heave natural frequency. In addition, the nonlinear hydrostatic restoring stiffness causes the structure's unstable motion at a half of heave natural period.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 추계종합학술대회
• /
• pp.222-225
• /
• 2001

This paper describes design and performance test of dual-mode horn antenna for HAPS (High Altitude Platform Station) in 47.2 - 47.5 GHz and 47.9 - 48.2 GHz bands. To obtain the optimal geometry parameters of it. the conical section is represented by a stepped transition composed of a set of cylindrical waveguide sections. For each step. the corresponding generalized scattering matrix is calculated. The elements of the matrices at the open end of the horn, are calculated by the rigorous formulas of the factorization method. To verify the theoretical results, a horn breadboard was manufactured for the medium frequency of 47.7 GHz and its radiation beam patterns were measured. The calculated and theoretical results are in good agreement.

• Ocean Systems Engineering
• /
• 제11권4호
• /
• pp.313-330
• /
• 2021

In this study, the dynamic interaction between an Arctic Spar and drifting level ice is examined in time domain using the newly developed ice-hull-mooring coupled dynamics program. The in-house program, CHARM3D, which is the hull-riser-mooring coupled dynamic simulator is extended by coupling with the open-source discrete element method (DEM) simulator, LIGGGHTS. In the LIGGGHTS module, the parallel-bonding method is implemented to model the level ice using an assembly of multiple bonded spherical particles. As a case study, a spread-moored Artic Spar platform, whose hull surface near waterline is the inverted conical shape, is chosen. To determine the breaking-related DEM parameter (the critical bonding strength), the four-point numerical bending test is used. A series of numerical simulations is systematically performed under the various ice conditions including ice drift velocity, flexural strength, and thickness. Then, the effects of these parameters on the ice force, platform motions, and mooring tensions are discussed. The simulations reveal various features of dynamic interactions between the drifting ice and moored platform for various ice conditions including the novel synchronous resonance at low ice speed. The newly developed simulator is promising and can repeatedly be used for the future design and analysis including ice-floater-mooring coupled dynamics.

• 공업화학
• /
• 제34권1호
• /
• pp.23-29
• /
• 2023

미세유체 반응기(microfluidic reactor)는 다양한 분야에 적용할 수 있는 새로운 기능성 재료합성을 위해 상당한 발전이 이루어지고 있다. 지난 10년 동안, 미세유체 반응기는 크기, 모양, 조성 및 표면 특성과 같은 물리화학적 (physicochemical) 매개변수를 제어할 수 있는 최종 사용자를 위한 방법론이 주목을 받고 있다. 본 연구에서는 원심력 기반의 미세유체 반응기를 개발하였으며 이를 통해 유도되는 원심력을 이용하여 유체의 흐름을 제어하고 합성되는 다기능성 입자의 다양한 크기 및 조성제어를 수행하였다. 원심력 기반 미세유체 반응기는 실험실에서 쉽게 구할 수 있는 미세바늘, 미세원심분리 튜브, 대용량 원심분리 튜브의 조립을 통해 제작된다. 원심분리기의 회전 속도, 알긴산 전구체의 농도, 칼슘이온의 농도, 그리고 주사침과 칼슘 수용액 간의 거리와 같은 실험적 제어변수 조절을 통해 쉽고 재현성 있게 크기제어가 이루어진 미세입자의 합성이 가능할 뿐만 아니라 복잡한 기술이나 첨단 장비 없이 대량생산이 가능하였다.