• The Journal of Korean Society for Radiation Therapy
• /
• v.28 no.2
• /
• pp.171-178
• /
• 2016

Purpose : In order to minimize the dose of femoral head as an appropriate treatment plan for rectal cancer radiation therapy, we compare and evaluate the usefulness of 3-field 3D conformal radiation therapy(below 3fCRT), which is a universal treatment method, and 5-field 3D conformal radiation therapy(below 5fCRT), and Volumetric Modulated Arc Therapy (VMAT). Materials and Methods : The 10 cases of rectal cancer that treated with 21EX were enrolled. Those cases were planned by Eclipse(Ver. 10.0.42, Varian, USA), PRO3(Progressive Resolution Optimizer 10.0.28) and AAA(Anisotropic Analytic Algorithm Ver. 10.0.28). 3fCRT and 5fCRT plan has $0^{\circ}$, $270^{\circ}$, $90^{\circ}$ and $0^{\circ}$, $95^{\circ}$, $45^{\circ}$, $315^{\circ}$, $265^{\circ}$ gantry angle, respectively. VMAT plan parameters consisted of 15MV coplanar $360^{\circ}$ 1 arac. Treatment prescription was employed delivering 54Gy to recum in 30 fractions. To minimize the dose difference that shows up randomly on optimizing, VMAT plans were optimized and calculated twice, and normalized to the target V100%=95%. The indexes of evaluation are D of Both femoral head and aceta fossa, total MU, H.I.(Homogeneity index) and C.I.(Conformity index) of the PTV. All VMAT plans were verified by gamma test with portal dosimetry using EPID. Results : D of Rt. femoral head was 53.08 Gy, 50.27 Gy, and 30.92 Gy, respectively, in the order of 3fCRT, 5fCRT, and VMAT treatment plan. Likewise, Lt. Femoral head showed average 53.68 Gy, 51.01 Gy and 29.23 Gy in the same order. D of Rt. aceta fossa was 54.86 Gy, 52.40 Gy, 30.37 Gy, respectively, in the order of 3fCRT, 5fCRT, and VMAT treatment plan. Likewise, Lt. Femoral head showed average 53.68 Gy, 51.01 Gy and 29.23 Gy in the same order. The maximum dose of both femoral head and aceta fossa was higher in the order of 3fCRT, 5fCRT, and VMAT treatment plan. C.I. showed the lowest VMAT treatment plan with an average of 1.64, 1.48, and 0.99 in the order of 3fCRT, 5fCRT, and VMAT treatment plan. There was no significant difference on H.I. of the PTV among three plans. Total MU showed that the VMAT treatment plan used 124.4MU and 299MU more than the 3fCRT and 5fCRT treatment plan, respectively. IMRT verification gamma test results for the VMAT plan passed over 90.0% at 2mm/2%. Conclusion : In rectal cancer treatment, the VMAT plan was shown to be advantageous in most of the evaluation indexes compared to the 3D plan, and the dose of the femoral head was greatly reduced. However, because of practical limitations there may be a case where it is difficult to select a VMAT treatment plan. 5fCRT has the advantage of reducing the dose of the femoral head as compared to the existing 3fCRT, without regard to additional problems. Therefore, not only would it extend survival time but the quality of life in general, if hospitals improved radiation therapy efficiency by selecting the treatment plan in accordance with the hospital's situation.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.8
• /
• pp.997-1011
• /
• 2017

This study aimed to evaluate the applicability of "food and nutrition standards for child care setting in the Seoul Metropolitan Government" using quantitative and qualitative surveys and lay the groundwork for future expansion. To evaluate the understanding and applicability of each item of the standards and utilize goodness of fit as an evaluation item to improve practicality of the child care center's health foodservice, we surveyed 82 child care centers, kindergartens, and community children centers in Seoul by e-mail through the Seoul Metropolitan Government in November 2015. Using focus group interviews with directors of child care centers and kindergartens as well as dieticians of child care support centers who had conducted public foodservice in Seoul, the appropriateness of each standard was finally reviewed, and amendments to extend this standard were derived. Results of the survey show an understanding of 86.9% and an applicability of 80.7%. Moreover, the applicability of the evaluation items for assessing improvement of health foodservice practices at the child care center was 82.6%. Qualitative evaluation of the applicability of standards through focus group interviews identified four factors for extended application: necessity of a guideline for separate food ingredient suppliers, conformity of the basis and purpose of the item, consideration of contextual situations, and necessity of establishing a Seoul-level foundation. Therefore, guidelines for the standards should be suggested for those providing public food services for children. Furthermore, separate guidelines categorized by items that food ingredient suppliers need to provide should be mandatory or recommended. Evaluation of the applicability of the standards suggests that revising and supplementing the guidelines in order to extend the standards can contribute to health promotion and a sustainable environment for children using public foodservice. Follow-up studies and supports are needed for sustainable food and nutrition management programs.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.2
• /
• pp.26-35
• /
• 2009

This study is an analysis of the design changes of children's play facilities and the related rules and regulations which causes these changes. Accordingly, it is noticed that a site's change of design by legislation and by yearly alternation influences playground design. First, after revising the provisions for the distance from roads and parking lots, the constructing of safety fences between play facilities and the using of durable materials, alterations of the designs have been made a reality. Second, the design changes after the period of regulation transitions were caused by provisions related to the shelter of evergreens and conditions of the sun. Third, the changes of the playgrounds were related to the substitution of exercise facilities for the local residents and in carrying out a hygiene exam more than twice a year. Because a lack of regulatory standards for the design of playgrounds resulted in compliance based on individual interpretation and because a substitution of exercise facilities is part of the way to alleviate these regulations, the conditions of the site under investigation could be projeced. By such changes of regulations and analysis of alterations of playground design, programs for improvement were suggested. It turned out that the composition of the concrete standard in conformity with regulations required closer observance. Moreover, design standards for children's playgrounds are needed, such as the provision of variation in external appearance, the creation of more flexible layouts and the outlining of spaces by themes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.578-589
• /
• 2018

Building Integrated Photovoltaic (BIPV) system is a typical integrated system that simultaneously performs both building function and solar power generation function. To maximize its potential advantage, however, the solar photovoltaic power generation function must be integrated from the early conceptual design stage, and maximum power generation must be designed. To cope with such requirements, preliminary research on BIPV design process based on architectural design model and computer simulation results for improving solar power generation performance have been published. However, the requirements of the BIPV system have not been clearly identified and systematically reflected in the subsequent design. Moreover, no model has verified the power generation design. To solve these problems, we systematically model the requirements of BIPV system and study power generation design based on the system requirements model. Through the study, we consistently use the standard system modeling language, SysML. Specifically, stakeholder requirements were first identified from stakeholders and related BIPV standards. Then, based on the domain model, the design requirements of the BIPV system were derived at the system level, and the functional and physical architectures of the target system were created based on the system requirements. Finally, the power generation performance of the BIPV system was evaluated through a simulated SysML model (Parametric diagram). If the SysML system model developed herein can be reinforced by reflecting the conditions resulting from building design, it will open an opportunity to study and optimize the power generation in the BIPV system in an integrated fashion.

• The Journal of the Korea Contents Association
• /
• v.15 no.11
• /
• pp.313-321
• /
• 2015

To minimize CT examination for Hip FAI diagnosis and operation plan. also, whether the MRI 3D images can replace Hip Clock face image was evaluated when performing Hip FAI MRI by using additional 3D image. This study analyzed Hip MRI and 3D Hip CT images of 31 patients in this hospital. For the purpose of evaluating the images, one orthopedic surgeon and one radiology specialist reconstructed Clock face, at MR and CT modality, by superior 12 o'clock, labrum front 3 o'clock, and the other side 9 o'clock, centering on Hip joint articular transverse ligament 6 o'clock. Afterwards, by the Likert Scale 5 point scale (independent t-test p<0.005), this study evaluated the check-up of A. retinacular vessel, B. head neck junction at 11 o'clock, A. Epiphyseal line, B. Cam lesion at 12 o'clock, and Cam lesion, Posterior Cam lesion at 1,2,3 and 4 o'clock. As for the verification of reliability among observers, this study verified coincidence by Cohen's weighted Kappa verification. As a result of Likert scale for the purpose of qualitative evaluation about the image, 11 o'clock A. retinacular vessel MR average was $3.69{\pm}1.0$ and CT average was $2.8{\pm}0.78$. B. head neck juncton didn't have a difference between two observers (p <0.416). 12 o'clock A. Epiphyseal line MR average was $3.54{\pm}1.00$ and CT average was $4.5{\pm}0.62$(p<0.000). B. Cam lesion didn't have a difference between two observers (p <0.532). 1,2,3,4 Cam lesion and Posterior Cam lesion were not statistically significant (p <0.656, p <0.658). As a result of weighted Kappa verification, 11 o'clock A.retinacular vessel CT K value was 0.663 and the lowest conformity. As a result of coincidence evaluation on respective item, a very high result was drawn, and two observers showed high reliability.

• Journal of Global Scholars of Marketing Science
• /
• v.20 no.1
• /
• pp.27-34
• /
• 2010

During the past 10 years, sales of luxury goods increased significantly to more than US$ 130 billion in 2007. In this industry, more than half of the revenue comes from Asia where the average income has risen significantly, and the demand for luxury products is forecast to grow rapidly. Purchasing luxury brands appears to be an intriguing social phenomenon that is profitable for companies in this region. As a newly developed country, Korea is one of the most attractive luxury markets in Asia. Currently, a total of 120 luxury fashion brands have entered the Korean market, primarily in luxury districts in Seoul where the competition is fierce. The purposes of this study are to: (1) identify antecedents of attitude toward luxury brands, (2) examine the effect of attitudes toward luxury brands on customer equity, (3) determine the impact of attitudes toward luxury brands on customer lifetime value, and (4) investigate the influence of customer equity on customer life time value. Previous studies have examined materialism, social need, experiential need, need for uniqueness, conformity, and fashion involvement as antecedents of attitude toward luxury brands. Richins and Dowson (1992) suggested that that materialism influences consumption behavior relative to quantity of goods purchased. Nueno and Quelch (1998) reported that the ownership of luxury brands conveys information related to the owner's social status, communicates an image of success and prestige, and is a determinant of purchase behavior. Experiential need is recognized as an important aspect of consumption, especially for new products developed to meet consumer demand. Since luxury goods, by definition are relatively scarce, ownership of these types of products may fulfill consumers' need for uniqueness. In this study, value equity, relationship equity, and brand equity are examined as drivers of customer equity. The sample (n = 114) was undergraduate and graduate students at two private women's universities in Seoul, Korea. Data collection was conducted using a self-administered questionnaire survey in March, 2009. Data analysis included descriptive statistics, factor analysis, reliability analysis, and regression analysis using SPSS 15.0 software. Data analysis resulted in a number of conclusions. First, experiential need and fashion involvement positively influence participants' attitude toward luxury brands. Second, attitude toward luxury brands positively influences brand equity, followed by value equity and relationship equity. However, there is no significant relationship between attitude toward luxury brand and customer lifetime value. Finally, relationship equity positively influences customer lifetime value. In conclusion, young consumers are an important potential consumer group that tries different brands to discover the ones most suitable for them. Luxury marketers that use effective marketing strategies to attract and engender loyalty among this potentially lucrative consumer group may increase customer equity and lifetime value.

• Korean Chemical Engineering Research
• /
• v.50 no.6
• /
• pp.1068-1075
• /
• 2012

Poly(butylene terephthalate) (PBT)/Nylon6,12 core/shell micro fiber were prepared by extrusion molding. To investigate their optimum extrusion conditions, compatibility of PBT/Nylon6,12 blend micro fiber in conformity to their weight ratio and manufacture temperature was explored with SEM morphology and DSC. The alterations in their mechanical properties by extrusion speed were compared and analyzed through a UTM. In comparison with SEM figures, the domain sizes of Nylon6,12 were gradually declined by increasing the extrusion temperature of blends. Furthermore, according to these SEM images, the phase separation between Nylon6,12 domain and PBT matrix became indistinct with increasing of weight percentage of Nylon6,12. In case of DSC, the boundaries of two peaks were almost disappeared when increasing the extrusion temperature and also intervals of each two melting peaks became narrow as increasing the Nylon6,12 ratio. The mechanical properties including tensile strength, elongation, flexural strength and flexural modulus were increased as the increase in the extrusion temperature until $260^{\circ}C$. However, the mechanical properties were actually deteriorated over $260^{\circ}C$. The tensile strength, elongation, flexural strength and flexural modulus at $260^{\circ}C$ were 560 $kg_f/cm^2$, 220%, 807 $kg_f/cm^2$ and 22,146 $kg_f/cm^2$, respectively. These values are more than intermediate values of mechanical properties of PBT and Nylon6,12. These results mean that there is compatibility between PBT and Nylon6,12. Based on the extrusion conditions that produced optimum compatibility of blend, as a result, our group obtained micro fibers with the core/shell structure.

• KDI Journal of Economic Policy
• /
• v.13 no.2
• /
• pp.97-127
• /
• 1991

This paper investigates the roles and the limitations of the Korean antitrust agencies-the Office of Fair Trade (OFT) and the Fair Trade Commission (FTC) during the making of the major industrial policies of the 1980's. The Korean antitrust agencies played only a minimal role in three major industrial policy-making issues in the 1980's- the enactment of the Industrial Development Act (IDA), the Industrial Rationalization Measures according to the IDA, and the Industrial Readjustment Measures on Consolidation of Large Insolvent Enterprises based on the revised Tax Exemption and Reduction Control Act. As causes for this performance bias in the Korean antitrust system, this paper considers five factors according to the current literature on implementation failure: ambiguous and insufficient statutory provisions of the Monopoly Regulation and Fair Trade Act (MRFTA); lack of resources; biased attitudes and motivations of the staff of the OFT and the FTC; bureaucratic incapability; and widespread misunderstanding about the roles and functions of the antitrust system in Korea. Among these five factors, bureaucratic incompetence and lack of understanding in various policy implementation environments about the roles and functions of the antitrust system have been regarded as the most important ones. Most staff members did not have enough educational training during their school years to engage in antitrust and fair trade policy-making. Furthermore, the high rate of staff turnover due to a mandatory personnel transfer system has prohibited the accumulation of knowledge and skills required for pursuing complicated structural antitrust enforcement. The limited capability of the OFT has put the agency in a disadvantaged position in negotiating with other economic ministries. The OFT has not provided plausible counter-arguments based on sound economic theories against other economic ministries' intensive market interventions in the name of rationalization and readjustment of industries. If the staff members of antitrust agencies have lacked substantive understanding of the antitrust and fair trade policy, the rest of government agencies must have had serious problems in understanding the correst roles and functions of the antitrust system. The policy environment of the Korean antitrust system, including other economic ministries, the Deputy Prime Minister, and President Chun, have tended to conceptualize the OFT more as an agency aiming only at fair trade policy and less as an agency that should enforce structural monopoly regulation as well. Based on this assessment of the performance of the Korean antitrust system, this paper evaluate current reform proposals for the MRFT A. The inclusion of the regulation of conglomerate mergers and of business divestiture orders may be a desirable revision, giving the MRFTA more complete provisions. However, given deficient staff experties and the unfavorable policy environments, it would be too optimistic and naive to expect that the inclusion of these provisions alone could improve the performance of the Korean antitrust system. In its conclusion, this paper suggests several policy recommendations for the Korean antitrust system, which would secure the stable development and accumulation of antitrust expertise for its staff members and enough understanding and conformity from its environments about its antitrust goals and functions.

• Journal of the Korea Concrete Institute
• /
• v.25 no.3
• /
• pp.321-329
• /
• 2013

Recently, the medium-low level radioactive waste from nuclear power plant must be transported from temporary storage to the final repository. Medium-low level radioactive waste, which is composed mainly of the liquid ion exchange resin, has been consolidated with cementitious material in the plastic or iron container. Since cementitious material is brittle, it would generate cracks by impact load during transportation, signifying leakage of radioactive ray. In order to design the safety transporting equipment, there is a need to check the compressive strength of the current waste. However, because it is impossible to measure strength by direct method due to leakage of radioactive ray, we will estimate the strength indirectly by the dynamic modulus of elasticity. Therefore, it must be identified the relationship between of strength and dynamic modulus of elasticity. According to the waste acceptance criteria, the compressive strength of cement based solid is defined as more than 3.44 MPa (500 psi). Compressive strength of the present solid is likely to be significantly higher than this baseline because of continuous hydration of cement during long period. On this background, we have tried to produce the specimens of the 28 day's compressive strength of 3 to 30 MPa having the same material composition as the solid product for the medium-low level radioactive waste, and analyze the relationship between the strength and the dynamic modulus of elasticity. By controling the addition rates of AE agent, we made the mixture containing the ion exchange resin and showing the target compressive strength (3~30 MPa). The dynamic modulus of elasticity of this mixtures is 4.1~10.2 GPa, about 20 GPa lower in the equivalent compressive strength level than that of ordinary concrete, and increasing the discrepancy according to increase strength. The compressive strength and the dynamic modulus of elasticity show the liner relationship.

• Journal of Environmental Policy
• /
• v.8 no.2
• /
• pp.25-61
• /
• 2009

These days, environmental policies have changed from being command and control systems toward economic incentive systems, with various incentives having been established by OECD countries. In Korea, many environmental charges have been established in order to diminish activities which damage natural resources. Among them, the Ecosystem Conservation Cooperation Charge and the Replacement Charge for Forest Resources Creation are considered to be representative environmental charges. These charges, along with a few others, were designed to encourage efforts to protect natural resources. The charges include a number of different features, utilize varying methods, and altered ranges of jurisdiction. However, the charges may pose serious inequity problems in terms of their estimated values and their conditions of reduction and exemption. For instance, although the Ecosystem Conservation Cooperation Charge is a primary charge applied to natural resource damage, the charge does not fully secure its original objectives due to its low levy and limited range of provisions. Moreover, the Replacement Charge for Forest Resources Creation has been criticized because of similar reduction and exemption provisions. Therefore, this study analyzes the inequity problems associated with the charges and proposes solutions. First of all, the Ecosystem Conservation Cooperation Charge should be redesigned in such a way that it reflects the substantial value of natural resource damage through either abrogate or increased maximum limits of the charge. With regard to the Replacement Charge for Forest Resources Creation, the cases and ranges of reduction and exemption provisions should be narrowed. Finally, the charges collected should be expended in conformity with their original objectives, and their expenditure should be restricted to either restoration activities or activities directly related to compensation and mitigation of damaged natural resources.