• Proceedings of the KOR-KST Conference
• /
• 1995.02a
• /
• pp.3-32
• /
• 1995

The Highway Capacity Manual specifies procedures for evaluating intersection performance in terms of delay per vehicle. What is lacking in the current methodology is a comparable quantitative procedure for ass~ssing the safety-based level of service provided to motorists. The objective of the research described herein was to develop a computational procedure for evaluating the safety-based level of service of signalized intersections based on the relative hazard of alternative intersection designs and signal timing plans. Conflict opportunity models were developed for those crossing, diverging, and stopping maneuvers which are associated with left-turn and rear-end accidents. Safety¬based level-of-service criteria were then developed based on the distribution of conflict opportunities computed from the developed models. A case study evaluation of the level of service analysis methodology revealed that the developed safety-based criteria were not as sensitive to changes in prevailing traffic, roadway, and signal timing conditions as the traditional delay-based measure. However, the methodology did permit a quantitative assessment of the trade-off between delay reduction and safety improvement. The Highway Capacity Manual (HCM) specifies procedures for evaluating intersection performance in terms of a wide variety of prevailing conditions such as traffic composition, intersection geometry, traffic volumes, and signal timing (1). At the present time, however, performance is only measured in terms of delay per vehicle. This is a parameter which is widely accepted as a meaningful and useful indicator of the efficiency with which an intersection is serving traffic needs. What is lacking in the current methodology is a comparable quantitative procedure for assessing the safety-based level of service provided to motorists. For example, it is well¬known that the change from permissive to protected left-turn phasing can reduce left-turn accident frequency. However, the HCM only permits a quantitative assessment of the impact of this alternative phasing arrangement on vehicle delay. It is left to the engineer or planner to subjectively judge the level of safety benefits, and to evaluate the trade-off between the efficiency and safety consequences of the alternative phasing plans. Numerous examples of other geometric design and signal timing improvements could also be given. At present, the principal methods available to the practitioner for evaluating the relative safety at signalized intersections are: a) the application of engineering judgement, b) accident analyses, and c) traffic conflicts analysis. Reliance on engineering judgement has obvious limitations, especially when placed in the context of the elaborate HCM procedures for calculating delay. Accident analyses generally require some type of before-after comparison, either for the case study intersection or for a large set of similar intersections. In e.ither situation, there are problems associated with compensating for regression-to-the-mean phenomena (2), as well as obtaining an adequate sample size. Research has also pointed to potential bias caused by the way in which exposure to accidents is measured (3, 4). Because of the problems associated with traditional accident analyses, some have promoted the use of tqe traffic conflicts technique (5). However, this procedure also has shortcomings in that it.requires extensive field data collection and trained observers to identify the different types of conflicts occurring in the field. The objective of the research described herein was to develop a computational procedure for evaluating the safety-based level of service of signalized intersections that would be compatible and consistent with that presently found in the HCM for evaluating efficiency-based level of service as measured by delay per vehicle (6). The intent was not to develop a new set of accident prediction models, but to design a methodology to quantitatively predict the relative hazard of alternative intersection designs and signal timing plans.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.3
• /
• pp.679-690
• /
• 2015

The need to remove the cause of traffic accidents by improving the engineering system for a vehicle and the road in order to minimize the accident hazard. This is likely to cause traffic accident continue to take a large and significant social cost and time to improve the reliability and efficiency of this generally poor road, thereby generating a lot of damage to the national traffic accident caused by improper environmental factors. In order to minimize damage from traffic accidents, the cause of accidents must be eliminated through technological improvements of vehicles and road systems. Generally, it is highly probable that traffic accident occurs more often on roads that lack safety measures, and can only be improved with tremendous time and costs. In particular, traffic accidents at intersections are on the rise due to inappropriate environmental factors, and are causing great losses for the nation as a whole. This study aims to present safety countermeasures against the cause of accidents by developing an intersection Traffic safety evaluation model. It will also diagnose vulnerable traffic points through BPA (Back -propagation algorithm) among artificial neural networks recently investigated in the area of artificial intelligence. Furthermore, it aims to pursue a more efficient traffic safety improvement project in terms of operating signalized intersections and establishing traffic safety policies. As a result of conducting this study, the mean square error approximate between the predicted values and actual measured values of traffic accidents derived from the BPA is estimated to be 3.89. It appeared that the BPA appeared to have excellent traffic safety evaluating abilities compared to the multiple regression model. In other words, The BPA can be effectively utilized in diagnosing and practical establishing transportation policy in the safety of actual signalized intersections.

• Journal of the Korean housing association
• /
• v.14 no.3
• /
• pp.127-136
• /
• 2003

The purpose of this study is to establish concept about a plan direction of preschooler's library, and provide a design type of preschooler's library. As a result, the following findings were obtained: 1) For the preschooler's reading area, it should be segregated between schooler and preschooler. Because there is a difference between a library use action and a development characteristic, it needs to be segregated to avoid conflict using library for both of those groups. 2) The space composition of preschooler's library stands up, and of a tube considers a traffic line of a user according to the function and systematizes a child, and to cause an interest of preschoolers. 3) Furnitures and equipment of preschooler's library must arrange in consideration of human body size of a user in a tube.

• Journal of Communications and Networks
• /
• v.15 no.2
• /
• pp.153-163
• /
• 2013

In recent years, more and more researches have been focusing on trust management of vehicle ad-hoc networks (VANETs) for improving the safety of vehicles. However, in these researches, little attention has been paid to the location privacy due to the natural conflict between trust and anonymity, which is the basic protection of privacy. Although traffic safety remains the most crucial issue in VANETs, location privacy can be just as important for drivers, and neither can be ignored. In this paper, we propose a beacon-based trust management system, called BTM, that aims to thwart internal attackers from sending false messages in privacy-enhanced VANETs. To evaluate the reliability and performance of the proposed system, we conducted a set of simulations under alteration attacks, bogus message attacks, and message suppression attacks. The simulation results show that the proposed system is highly resilient to adversarial attacks, whether it is under a fixed silent period or random silent period location privacy-enhancement scheme.

• Journal of Korea Multimedia Society
• /
• v.15 no.10
• /
• pp.1212-1220
• /
• 2012

In this paper, a collision-free resource reservation scheme for WUSB (Wireless Universal Serial Bus) networks with WiMedia D-MAC (Distributed Medium Access Control). Since distributed characteristic of the WiMedia D-MAC supporting DRP (Distributed Reservation Protocol) scheme may cause lots of conflicts, overall performances of the WUSB with WiMedia D-MAC can be deteriorated. In addition, when we consider multi-hop environment, "mobile" hidden node problem due to mobility of WUSB devices can be happened, and it is a critical problem to mobile WUSB devices transceiving real-time QoS (Quality of Service) traffic. To tackle the problem, we propose a new DRP reservation mechanism to prevent DRP conflicts for multi-hop mobility support in WUSB networks with WiMedia D-MAC and show its improved performance via simulation results.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.490-497
• /
• 2011

When operating Express and Standard trains, which run with two different scheduled time, in a single line with limited number of side tracks for overtaking standard trains, it is required to have various modeling methodologies and simulations in order to calculate an optimum headway to maximize the capacity of the line with the best scheduled time. Especially it is inevitable that following trains have to slow down or stop in the middle of their operations due to the preceding trains, in case it is inappropriate controlled about either in which station an overtaking should be taken or how long it should be. This study is to analyze TPS data which have been produced with a simulation program which the team has invented to optimize Express and Standard mixed traffic plan and to introduce an algorism which shows detected conflict data, calculates appropriate dwell time after getting overtaken and helps to decide stations for overtaking.

• Journal of Korean Society of Transportation
• /
• v.14 no.4
• /
• pp.155-178
• /
• 1996

신호교차로 서비스수준은, 객관적으로 측정 할 수 있는 여러 가지 기준에 의해 결정될 수 있다. 예를 들면, 지체시간(Delay), 교통사고수(Number of Accident), 교통사고율(Accident Rate), 충돌수(Traffic Conflict), 그리고 교통사고에 노출된 차량수(Exposure)등이다. 지금까지는 1985 Highway Capacity Manual(HCM)에서 소개된 지체시간에 의한 서비스수준 결정방법이 널리 사용되어 왔다. 본 논문에서는 1985 HCM 방법의 중용성과 유용성에 대해 논하지 않고, 교통안전(Safety)에 의한 신호교차로 서비스수준 결정방법을 제시하였다. 교차로의 위험도(Degree of Intersection Hazard)를 예측하기 위해, 교통사고빈도 수가 가장 높은 두가지 교통사고 유형, 즉 좌회전추돌(Left-Tum)과 후미추돌(Rear-End) 예측 모형이 개발되었다. 여기서 첫째, 좌회전추돌 위험도를 예측하기 위하여 음지수 분포(Negative-Exponential Distribution)를 이용한 확률적 모형이 개발되었다. 둘째, 후미추돌 위험도를 예측하기 위하여 연속류 모형(Continuum Model)을 이용한 거시적 모형이 개발되었다. 개발된 두가지 모형을 이용하여 신호교차로 안전도를 예측하였으며 교차로 서비스수준이 안전도에 의해 결정되었다. 본 논문에서 제시된 교통안전에 의한 신호교차로 서비스수준 결정방법은 연동교차로를 제외한 독립교차로에만 적용이 된다.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.10
• /
• pp.12-19
• /
• 1996

Many recent supercomputers employ a kind of switch-based multistage interconnection network architectrues (MINs) for constructing scalabel parallel compters. This paper proposed a new routing method, hybrid wormhole and virtual-cut through routing (HWCR) for the prevention of rapid performance degradation comming from a conflict in links usage at hot traffic situation. This HWCR through (VCT) for the fast removing temporal stagger, result in seamless flow of packet stream. When the blocked link is removed, wormhole routing is resumed. The HWCR method adopted a hierachical buffer scheme for improving the network performance and reducing the cost in BMINs. We could get optimum buffer size and communicatin latency through the computer simulation based on proposed HWCR, and the results were compared to those using wormhole and VCT.

• Journal of Korean Society of Transportation
• /
• v.17 no.4
• /
• pp.9-17
• /
• 1999

교통문제는 과거에 비하여 보다 복잡해지고 다양해지고 있으며, 이러한 교통문제를 해결하기 위한 방안을 도출하는 분석기법 또한 다양해지고 있다. 이러한 기법중 안전도 평가기법에 관한 연구는 선진국에서는 1970년대부터 진행되어 왔으나, 이에 반하여 국내에서는 최근에서야 안전도에 대한 문제가 부각되면서 이에 대한 연구가 시작되고 있는 실정이다. 본 논문은 국내 외 연구사례를 중심으로 교통상충기법(TCT)을 소개하였고, 가장 진보된 방법인 스웨덴의 상충분석기법을 기반으로 국내에 적용할 수 있도록 모형을 개발하고 심각한 정도에 따라 4개 죤으로 분류하여 위험순위를 평가할 수 있는 방법을 제시하였으며, 실제로 이러한 상충분석기법을 국내의 3개 교차로 분석에 적용하여 보았다. 사고와 상충간의 conversion factor는 수집된 자료의 부족으로 사고자료의 심각도까지는 고려하지 못하였으 나, TA값을 구하고 4개죤 분류를 통하여 위험순위를 분석하여 교차로의 안전도평가에 이용할 수 있음은 보여주었다. 상충조사 분석은 안전도 평가를 저 비용과 짧은 시간내에 보다 상세한 결과를 도출할 수 있다는 점과 대상지의 사전 후 단기간 평가 방법에 가장 효과적인 기법이라는 측면에서 국내 안전도 평가에 많이 적용되기를 바란다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.4
• /
• pp.1279-1287
• /
• 2014

The purpose of this study is to develop the U-turn accident model at signalized intersections in urban areas. The characteristics of the accidents which are associated with U-turn operation at 3 and 4-legged signalized intersections was analyzed and the U-turn accident model was developed by regression analysis in Changwon city. First, in order to analyze the effectiveness on traffic accidents by U-turn installation, the difference of mean of traffic accident number are measured between two groups which are composed by whether or not U-turn installation the groups by Mann-Whitney U test. The result of significance test showed that intergroup comparison on mean by accident types made difference except rear-end accident type and by accident locations exit section only showed difference in significance level at 4-legged intersections, so the accident number have more where the U-turn is permitted than not. Response measures about the number of accidents were classified by whether accidents occurred and accident model were constructed using binomial logistic regression analysis method. The developed models show that the variables of conflict traffic, number of opposing lane are adopted as independent variable for both intersections. The variables of longitudinal grade for 3-legged signalized intersection and number of crosswalk for 4-legged signalized intersection at which the U-turn is permitted is adopted as independent variable only. These study results suggest that U-turn would be permitted at the intersection where the number of opposing lane is more than 3.5 each, the longitudinal grade of opposing road is upward flow and there is need to establish the U-turn traffic sign at signalized intersections.