• Composites Research
• /
• v.13 no.2
• /
• pp.30-39
• /
• 2000

It is difficult for civil engineer to apply composite materials of laminated type to structure for civil construction because of complicated theory although those have much merit. A simple method by which one can predict "exact" values of the natural frequency of vibration of laminated plates is presented. Many laminates with particular orientations have negligible values of $B_{16}$ and $B_{26}$ as the number of plies increases. Such laminates, with $D_{16}$ = $D_{26}$ ->0 can be solved by the same equation as for the special orthotropic laminates(1991,1995). If the quasi-isotrpic constants are used, It is possible to simplify analysis procedure since the equations for isotropic plates can be used. Use of some coefficients can produce "exact" values for laminates with such configuration. This coefficient, in fact, represents the effect of the anisotropy of the laminate. D. H. Kim proposed to use a correction factor, he developed, to produce "exact" solution out of the approximate solution obtained by using the quasi-isotropic constants(1995). In this paper, the fiber orienation studied is [$\alpha$/$\beta$/$\beta$/$\gamma$/$\alpha$/$\alpha$/$\beta$]r, with $\alpha$=-$\beta$, and $\gamma$${\gamma}$=$0^{\circ}$ or $90^{\circ}$ and the above-mentioned method is used to obtain the natural frequencies of plates with such orientations, and detailed result is presented for the use of engineers.nted for the use of engineers.

• Journal of the Korean Magnetic Resonance Society
• /
• v.9 no.1
• /
• pp.48-60
• /
• 2005

Purpose: The purpose of this study was to design and build an optimized birdcage resonator configuration with a low pass filter, which would facilitate the acquisition of high-resolution 3D-image of small animals at 3T MRI system. Methods and Materials: The birdcage resonator with 12-element structures was built, in order to ensure B1 homogeneity over the image volume and maximum filling factor, and hence to maximize the signal to noise ratio (SNR) and resolution of the 3-dimensional images. The diameter and length of each element of a birdcage resonator were as follows: (1) diameter 13 cm, length 22 cm, (2) diameter 15 cm, length 22 cm, (3) diameter 17 cm, length 25 cm. Spin echo pulse sequence and fast spin echo pulse sequence were employed in obtaining MR images. The quality of the manufactured birdcage resonators wes evaluated on the basis of the return loss following matching and tuning process. Results: The experimental MR image of phantoms by the various manufactured birdcage resonators were obtained to compare the SNR in accordance with the size of objects. The size of an object to that of coil was identified by parameters that were estimated from the image of a phantom. First, the diameter of the birdcage resonator was 15cm, and the ratio of the tangerine to the birdcage resonator accounted for approximately 27%. The Q factor was 53.2 and the SNR was 150.7. Second, at the same birdcage resonator, the ratio of the orange was approximately 53%. The SNR and the Q parameter was 212.8 and 91.2, respectively. Conclusion: The present study demonstrated that if birdcage resonators have the same forms, SNR could be different depending on the size of an object, especially when the size of an object to that of coil is approximately 40~80%, the former is bigger than the latter. Therefore, when the size of an object to be observed is smaller than that of coil, the coil should be manufactured in accordance with the size of an object in order to obtain much more excellent images.

• Journal of Acupuncture Research
• /
• v.29 no.1
• /
• pp.89-101
• /
• 2012

Objectives : The purpose of this study was find out the therapeutic effects of its exclusive use on the rat with allergic rhinitis. Materials and Methods : Thirty Sprague-Dawley rats were divided into three group : normal group, control group and sample group. To induce the allergic rhinitis in control group and sample group, rats were sensitized intraperitoneally with 0.1% ovalumin solution 3 times at intervals of 1 week. Then intranasal sensitization was performed by diffusing 0.1% ovalumin solution 3 times at intervals of 2 days. After that time, rats in the sample group were administered by $Yonghyang$($LI_{20}$) subcutaneously to treat the inflammation. Results : 1. The anti-oxidant effects of $Hwangryunhaedok-tang$ extract was dose-dependantly increased. 2. The RAW 264.7 cells were treated with LPS for 1 hours prior to the addition of indicated concentrations ($0.4,-1.0mg/m{\ell}$) of HHT, and the cells were further incubated for 24 hours. The LPS-induced iNOS mRNA expression and NO production were dose-dependantly decreased in HHT treated RAW 264.7 cells. 3. The number of eosinophil in HP noticeably decreased than CON and this decrease had probability. The infiltration of eosinophil in HP noticeably decreased than CON. 4. The damaged mucosa as disruption of cilia in respiratory cell and vacant mucose secreting cell were increased CON, but HP same as normal configuration. Decrease of PAS positive cell were shown in CON, but goblet cell occupied with neutral mucous were shown in HP. Decrease of mucosal stress(HSP70). Decrease of perennial sign(PPAR-${\gamma}$). Decrease of icthing and sneezing intricate neurotransmitter-(substance P). 5. The anti-inflammation of HHT pharmacopuncture for AR caused mucosa comes to result as belows. Decrease of pre-inflammation cytokine(TNF-${\alpha}$). Decrease of transcription factor (NF-${\kappa}B$ p65). Decrease of transcription factor inhibitor(p-$I{\kappa}B$). Decrease of inflammation cytokine(iNOS). Conclusions : The results may suggest that administration treatment using $Hwangryunhaedok-tang$ pharmacopucnture decreases the inflammatory response on an animal model with allergic rhinitis.

• Journal of the Korean Chemical Society
• /
• v.24 no.4
• /
• pp.269-279
• /
• 1980

A method for calulation of the magnetic moments for both octahedral and distorted octahedral $[V(III)A_3B_3]$ type complexes, all with $t^2_2$ configuration, has been developed [A and B = O, Cl, N, F or Br]. The calculated magnetic moments by this method are in reasonable agreements with the experimental values. The calculated magnetic moments for distorted octahedral $[V(III)A_3B_3]$/TEX> type complexes decrease as the extent of tetragonal distortion increases.The effects of k (orbital reduction faction factor), $\xi'$/TEX> and temperature on the magnetic moments are also investigated.A new method for calculation of the contribution of $^3T_1$ molecular orbitals to the dipole moment and polarizability has also developed. The calculated contribution of $^3T_1$ molecular orbitals falls in the reasonable range of values.

• Journal of Biosystems Engineering
• /
• v.11 no.2
• /
• pp.55-65
• /
• 1986

The resistance to the passage of airflow through various agricultural products is an important consideration in the design of an aeration or drying system. The amount of resistance to airflow varied widely from one kind of grain to another, and depended upon airflow rate, surface texture and shape of the particles, the size and configuration of voids, and foreign and fine material in the grain bed. The airflow rate was the major factor considered on this kind of study in the early stages. But these days, the studies on the resistance to airflow of grain affected by grain moisture content and foreign and fine material have been widely carried out. However the foreign an fine material in the grain bed could not be a major factor on the study in Korea because there were only a few grain process procedure after harvesting it. The objectives of this study were to investigate the effect of moisture content and airflow rate on airflow resistance to grain, and to develop a model to predict the static pressure drop across the grain bed as a function of moisture content and airflow rate. The rough rice varieties, Akibare, Milyang 15 (Japonica types), Samkwang, Backyang (Indica types)and covered barley variety, Olbori, which were harvested in 1985 were used in the experiment after cleaning them. Resistances to airflow of grain were investigated at four levels of moisture content (13-25%, wb.) for ten different airflow rates($0.01-0.15m^3/sm^2$). The results of this study are summarized as follows; 1. Theaverage bulk densities were $585.3kg/m^3$ for rough rice and $691.6kg/m^3$ for barley at the loose fill, and were $648.8kg/m^3$ for rough rice and $758.2kg/m^3$ for barley at the packed fill. The pressure drops at the packed fill beds were approximately 1.4 to 1.8 times higher than those at the loose fill beds. 2. The pressure drops across grain beds deceased with the increase of moisture content and increased with airflow rate. The decreasing rates of pressure drop across grain beds according to the moisture contents at the lower airflow rates were higher than those at the higher airflow rates, and the increasing rates of pressure drop according to the airflow rates at the lower moisture contents were higher those at higher moisture contents. 3. The pressure drop across barley bed were much higher than rough rice beds and the pressure drops across Japonica type rough rice beds were a little higher than Indica type. 4. The mathematical models to predict the pressure drop across grain beds as a function of moisture content and airflow rate were developed from these experiments.

• Journal of the Korean Electrochemical Society
• /
• v.10 no.4
• /
• pp.245-251
• /
• 2007

The performance of fuel cell is enhanced with increasing reaction surface. Narrow flow channels in flow plate cause increased pumping power. Therefore it is very important to consider the pressure drops in the flow channel of fuel cell. Previous research for pressure drop for micro channel of fuel cell was focused on effects of various configuration of flow channel without electrochemical reaction. It is very important to know pressure loss of micro flow channel with electrochemical reaction because fluid density in micro channel is changed due to chemical reaction. In this paper, it is investigated that the pressure drops in micro channel of various geometries at anode and cathode with electrochemical reaction and compared them to friction coefficient (fRe), velocity, pressure losses for corresponding non reacting flow channel. The results show that friction factors for cold flow channel could be used for parallel and bended flow channel for flow channel design of fuel cell. In the other hand, pressure drop for serpentine flow channel is the lowest among flow channels due to bypass flow across gas diffusion layer under reacting flow condition although its pressure drop is highest for cold flow condition.

• 한국노년학
• /
• v.41 no.1
• /
• pp.149-168
• /
• 2021

This study was to develop the Medication Adherence Scale in Elderly (MAS-E) with chronic disease and verify its reliability and validity. The MAS-E was developed in 5 steps: Configuration of conceptual frame by content analysis, preliminary items, pilot study, reliability and validity test, and development of final MAS-E with chronic disease. The questionnaires were collected from 345 adults with one-to-one interviews. Verification of its reliability and validity was divided into two phases. Reliability was tested using Cronbach's alpha, split-halves reliability, and test-retest. For validity tests, item analysis, factor analysis, total score-factor score correlation analysis, and criterion related validity were used. The developed scale consisted of 18 items and 4 factors - remember of taking medication (2 items), expectations for drug effects (5 items), practice taking medication according to instructions (8 items), communicating with health professionals (3 items), and explained 69.7% of total variance. The scale had significantly positive correlation (r = .72, p <.001) with the Morisky Medication Adherence Scale (MMAS-8). Cronbach's alpha was .91, Guttman split half coefficient was .80, and test-retest reliability was .912. Finding suggest that the MAS-E is a suitable scale to assess the status of medication adherence in elderly with chronic disease.

• The Journal of the Korea Contents Association
• /
• v.22 no.3
• /
• pp.343-353
• /
• 2022

This study examines which factors will act as important factors for the public in designing a platform in the future to raise public awareness of the horse industry, and through this, a study on platform design factors of the horse industry to present insights on optimal platform design. For this study, structured questionnaires were distributed to 300 domestic adults who were interested in the horse industry to collect data, and the research questions set by using the statistical processing program SPSS 22.0 Ver were verified. As a result of the study, the usefulness of information in the central route and the playfulness of the information source among the peripheral routes were the most influential factors for consumer attitudes, and the up-to-dateness of information in the central route on consumer behavioral intentions. It was found that the attractiveness of the information source among the surrounding routes was the most influential factor. In addition, it was found that the positive attitude of consumers toward the horse industry platform is a factor that has a positive effect on the purchase intention and positive word of mouth intention for the horse industry in the future. Based on these results, this researcher needs to design content that can unravel useful information related to the horse industry in an interesting way to raise public awareness of the horse industry, and to provide the latest trends related to the horse industry at all times to draw real demand It should be possible and suggested that a design configuration that can make the platform feel more attractive is needed.

• Journal of Korea Water Resources Association
• /
• v.56 no.10
• /
• pp.667-678
• /
• 2023

In this study, quasi-3D inundation flow simulations were conducted for a simplified subway station configuration. The effects of variations in rainwater inflow locations and discharge were investigated, analyzing the resulting inundation flow patterns and flood risk. The inundation simulation results calculated the incipient velocities for slipping and toppling accidents to assess pedestrian safety. The results indicated that velocities exceeding the incipient velocity for slipping accidents mainly occurred on the flooded staircase. Meanwhile, velocities surpassing the incipient toppling accidents were observed around the staircase and the corridor near the staircase leading to B2F. This observation is consistent with the results from the specific force distribution analysis. To provide detailed flood risk assessments, the Flood Hazard Degree (FD) was applied with four levels of criteria, along with the Flood Intensity Factor (FIF). The results demonstrated that FD identified a broader area at risk of flood-induced consequences compared to FIF. When comparing the different inundation risk assessment methods, the specific force method tended to overestimate the risk area, whereas FIF tended to underestimate it. Furthermore, among all assessment methods, the influence of rainwater discharge was found to have a more dominant effect on flood risk assessment compared to the number of rainwater inflow locations. Additionally, the direction of inundation flow influenced the assessed risk, with collision-induced flow patterns leading to higher flood risk than those with identical flow directions.

• Korean Journal of Plant Tissue Culture
• /
• v.24 no.1
• /
• pp.1-35
• /
• 1997

Fertilized egg, by successive cell divisions, differentiates into different tissues and organs with various structures and functions. Different cells and tissues contain different proteins, products of selective gene expression. Not all the genes in any genomes are equally active, temporal and spatial gene expression being the general rule. Present paper attempts to review the tanscriptional mechanisms or the initiations of transcription from several angles. In some of the organisms the genes in the process of transcription or the genes in the inactive state can be seen under the light microscope. Some bands of Drosophila polytene chromosomes may exhibit a swollen or puff appearance under certain conditions. A puff, unfolded or decondensed form of chromomere, represents sets of intense transcriptional activity or RNA synthesis. The heterochromatic X chromosome whose genes remain inactive in the female mammals can be visualized as a dark staining structure called Barr body, Configuration of chromatin differs between transcribed and nontranscribed chromatin. Modification to the chromatin facilitates RNA synthesis. The movement of large polymerase molecule along the DNA would probably be facilitated if some modifications of the chromatin configuration is effected. Methylation of cytosines in CG sequences is associated with inactive genes. Methylation can play a role in determination of mammalian cells during embryogenesis. Demethylation is necessary for the gene to be expressed during development A histone modification that is also known to be correlated with transcriptional capacity of chromatin is acetylation of the lysine residues of the core histones. Chromatin containing a high level of histone acetylation is very sensitive to DNase 1. For the transcription to occur TBP must first bind to the TATA box. Another TF, TF IIB, then binds to the promoter-TBP complex, facilitating the access of RNA polymerase to the transcription initiation site. As recently as eight years ago researchers assumed that histones were irrelevant to the regulation of gene expression. Histones combine with the DNA to form nucleosome of the chromatin. Histones are vital participant in gene regulation. Histone and basal factors compete for access to TATA box. When DNA is exposed to basal factors before histones are introduced, the basal factors assemble on TATA boxes preventing the access of histones, allowing transcription to occur, for transcription to begin, activator protein at the upstream activation sequence or enhancer must interact with the tail of histone H4 at TATA box and cause the histone role particle to dissociate from the TATA box leading to partial breakup of the histone core particle and allowing the basal factors to bind to the TATA box. New concept of genomic flux in contrast to the old concept of static genome has been developed based on the powerful new molecular techniques. Genomic changes such as repetitive DNAs and transposable elements, it is assumed but not yet proved, may affect some of the developmental patterns that characterize particular cells, tissues, organs, and organisms. In the last decade or so remarkable achievement have been made in the researches of the structures and functions of TFs and the specific target sequences located in promoters or enhancers where these TFs bind. TFs have independent domains that bind DNA and that activate transcription. DNA binding domain of TFs serves to bring the protein into the right location. There are many types of DNA binding domains. Common types of motifs can be found that are responsible for binding to DNA. The motifs are usually quite short and comprise only a small part of the protein structure. Steroid receptors have domains for hormone binding, DNA binding, and activating transcription. The zinc finger motif comprises a DNA binding domain. Leucine zipper consist of a stretch of amino acids with a leucine residue in every seventh position Two proteins form a dimer because they interact by means of leucine zippers on similar α-helical domain. This positions their DNA binding basic domains for interaction with the two halves of a DNA sequence with dyad symmetry of TGACTCA, ACTGAGT.