• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.105-108
• /
• 2007

In this paper, we have developed a UPnP-OSGi Bundle for digital convergence based on UPnP middleware. UPnP-OSGi bundle is demanded sustaining realtime monitering system based on UPnP middleware that is possible multimedia ability of a piece with a multiplicity of service and joint user data , service lifecycle , management division service for home network system offered convergence service. This bundle is possible a multiplicity of control and monitering service segmentation so develop a multiplicity of service is easy. and provide zero-configuration system.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.11
• /
• pp.1661-1666
• /
• 2004

The reaction of titanium tetraisopropoxide with 2 equiv of N,N-diethyl acetoacetamide affords Ti($O^iPr)_2(CH_3COCHCONEt_2)_2$ (1) as colorless crystals in 80% yield. Compound 1 is characterized by spectroscopic (Mass and $^1H/^{13}C$ NMR) and microanalytical data. Molecular structure of 1 has been determined by a single crystal X-ray diffraction study, which reveals that it is a monomeric, cis-diisopropoxide and contains a six coordinate Ti(IV) atom with a cis($CONEt_2$), trans($COCH_3$) configuration (1a) in a distorted octahedral environment. Variable-temperature $^1H$ NMR spectra of 1 indicate that it exists as an equilibrium mixture of cis, trans (1a) and cis, cis (1b) isomers in a 0.57 : 0.43 ratio at -20$^{\circ}C$ in toluene-$d_8$ solution. Thermal properties of 1 as a MOCVD precursor for titanium dioxide films have been evaluated by thermal gravimetric analysis and vapor pressure measurement. Thin films of pure anatase titanium dioxide (after annealing above 500$^{\circ}C$ under oxygen) have been grown on Si(100) with precursor 1 in the substrate temperature range of 350- 500$^{\circ}$ using a bubbler-based MOCVD method.

• Journal of Practical Engineering Education
• /
• v.10 no.2
• /
• pp.81-87
• /
• 2018

During the major sections of the network, Software-defined network control technology for the network area corresponding to the transmission network is becoming a change in network-controlled environments utilizing network operation and provisioning across the network industry. Currently development is underway along with the deployment of PTN equipment and configuration for provisioning is being phased out. It is actively introducing establishment of SDN-based control system while constructing provisioning of PTN equipment from actual commercial network. Therefore, in this thesis, we are going to look at the contents and trends of SDN systems in packet-based transmission networks based on PTN and use them in research on OpenDaylight, an open source for configuring SDN. It then Network Operator will study the software defined control techniques for operational education.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.977-982
• /
• 2007

There have been many efforts in automatic object recognition using computing technologies. Especially in the development of automated construction equipment, automatic object recognition is very important issue for the proper equipment maneuvering. 3D laser scanning, which uses (time-of-flight) method to construct the 3-dimensional information, is applied to the civil earth work environment for its high accuracy, quick data collection, and object recognition capability that will be developed by the authors in the future. The 3D earth model is also used as a fundamental information for intelligent earth work task planning. This paper presents the analysis of the 3D laser scanner market and selection of the most optimum 3D scanner for the intelligent earth work planning. As well as the hardware configuration for the automated 3D earth modeling is developed but also the software structure and detailed user interface are designed in this research. In addition, it is presented in this paper that the accuracy comparison test between TotalStation(R) which is a traditional survey tool and ScanStation(R). The accuracy test is done by relative distance measurement using known targets.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.26 no.4
• /
• pp.56-66
• /
• 2023

Safety accidents are increasing, such as changes in groundwater levels due to construction work or natural influences, or ground cave-ins caused by soil runoff from old water supply and sewage pipes. In addition, underground facility management agencies must make efforts to improve the accuracy of underground information through continuous investigation and exploration in accordance with the Special Act on Enhanced Underground Safety Management. Accordingly, in this study, we defined the configuration of equipment and data processing method to collect 3D precise exploration underground facility information and developed 3D underground facility information collection technology to ensure accuracy of underground facilities. As a result of verifying the developed technology, the horizontal accuracy improved by an average of 6cm compared to the existing method, making it possible to acquire 3D underground facility information within the error range of the public survey work regulations.

• Journal of Intelligence and Information Systems
• /
• v.21 no.2
• /
• pp.93-112
• /
• 2015

Depending on the change in consumer's consumption pattern, existing retail shop has evolved in hypermarket or convenience store offering grocery and daily products mostly. Therefore, it is important to maintain the inventory levels and proper product configuration for effectively utilize the limited space in the retail store and increasing sales. Accordingly, this study proposed proper product configuration and inventory level strategy based on RFM(Recency, Frequency, Monetary) model and SOM(self-organizing map) for manage the retail shop effectively. RFM model is analytic model to analyze customer behaviors based on the past customer's buying activities. And it can differentiates important customers from large data by three variables. R represents recency, which refers to the last purchase of commodities. The latest consuming customer has bigger R. F represents frequency, which refers to the number of transactions in a particular period and M represents monetary, which refers to consumption money amount in a particular period. Thus, RFM method has been known to be a very effective model for customer segmentation. In this study, using a normalized value of the RFM variables, SOM cluster analysis was performed. SOM is regarded as one of the most distinguished artificial neural network models in the unsupervised learning tool space. It is a popular tool for clustering and visualization of high dimensional data in such a way that similar items are grouped spatially close to one another. In particular, it has been successfully applied in various technical fields for finding patterns. In our research, the procedure tries to find sales patterns by analyzing product sales records with Recency, Frequency and Monetary values. And to suggest a business strategy, we conduct the decision tree based on SOM results. To validate the proposed procedure in this study, we adopted the M-mart data collected between 2014.01.01~2014.12.31. Each product get the value of R, F, M, and they are clustered by 9 using SOM. And we also performed three tests using the weekday data, weekend data, whole data in order to analyze the sales pattern change. In order to propose the strategy of each cluster, we examine the criteria of product clustering. The clusters through the SOM can be explained by the characteristics of these clusters of decision trees. As a result, we can suggest the inventory management strategy of each 9 clusters through the suggested procedures of the study. The highest of all three value(R, F, M) cluster's products need to have high level of the inventory as well as to be disposed in a place where it can be increasing customer's path. In contrast, the lowest of all three value(R, F, M) cluster's products need to have low level of inventory as well as to be disposed in a place where visibility is low. The highest R value cluster's products is usually new releases products, and need to be placed on the front of the store. And, manager should decrease inventory levels gradually in the highest F value cluster's products purchased in the past. Because, we assume that cluster has lower R value and the M value than the average value of good. And it can be deduced that product are sold poorly in recent days and total sales also will be lower than the frequency. The procedure presented in this study is expected to contribute to raising the profitability of the retail store. The paper is organized as follows. The second chapter briefly reviews the literature related to this study. The third chapter suggests procedures for research proposals, and the fourth chapter applied suggested procedure using the actual product sales data. Finally, the fifth chapter described the conclusion of the study and further research.

• Korean Journal of Remote Sensing
• /
• v.18 no.1
• /
• pp.53-59
• /
• 2002

The MSC is a payload on the KOMPSAT-2 satellite to perform the earth remote sensing. The instrument images the earth using a push-broom motion with a swath width of 15 km and a GSD(Ground Sample Distance) of 1 m over the entire FOV(Field Of View) at altitude 685 km. The instrument is designed to haute an on-orbit operation duty cycle of 20% over the mission lifetime of 3 years with the functions of programmable gain/offset and on-board image data compression/storage. The MSC instrument has one channel for panchromatic imaging and four channel for multi-spectral imaging covering the spectral range from 450nm to 900nm using TDI(Time Belayed Integration) CCD(Charge Coupled Device) FPA(Focal Plane Assembly). The MSC hardware consists of three subsystem, EOS(Electro Optic camera Subsystem), PMU(Payload Management Unit) and PDTS(Payload Data Transmission Subsystem) and each subsystems are currently under development and will be integrated and verified through functional and space environment tests. Final verified MSC will be delivered to spacecraft bus for AIT(Assembly, Integration and Test) and then COMSAT-2 satellite will be launched after verification process through IST(Integrated Satellite Test). In this paper, the introduction of MSC, the configuration of MSC electronics including electrical interlace and design of CEU(Camera Electronic Unit) in EOS are described. MSC Operation parameters induced from the operation concept are discussed and analyzed to find the influence of system for on-orbit operation in future.

• Convergence Security Journal
• /
• v.12 no.1
• /
• pp.35-42
• /
• 2012

Increase of data traffic and the advent of new real-time services require to change from the traditional TDM-based (Time Division Multiplexing) networks to the optical networks that soft and dynamic configuration. Voice and lease line services are main service area of the traditional TDM-based networks. This optical network became main infrastructure that offer many channel that can convey data, video, and voice. To provide high resilience against failures, Packet-optical networks must have an ability to maintain an acceptable level of service during network failures. Fast and resource optimized lightpath restoration strategies are urgent requirements for the near future Packet-optical networks with a Generalized Multi-Protocol Label Switching(GMPLS) control plane. The goal of this paper is to provide packet-optical network with a hierarchical multi-layer recovery in order to fast and coordinated restoration in packet-optical network/GMPLS, focusing on new implementation information. The proposed schemes do not need an extension of optical network signaling (routing) protocols for support.

• Korean Institute of Interior Design Journal
• /
• v.20 no.5
• /
• pp.236-244
• /
• 2011

As the digital information infrastructure is established for the public library system in the contemporary age, expectations and demands surrounding the public library system are growing rapidly as the place of exchange and enjoyment of information and culture, and as the place of life-long learning. In addition, a new kind of information & culture services are needed to meet the demands of contemporary men and women, who are exploring information as the information environment undergoes rapid changes - from increase in the volume of digital publications, to increase in the usefulness of online information resources, to strides made in the media industry. The public library will continue to play its role and function by providing to all users all available information, whether it's available online or offline, whether it's in a physical format or in a digital format. As such, design and management of a space appropriate as a new information environment are needed. It is deemed that an information infrastructure for Daegu that can improve the quality of life in the region and can increase user accessibility to information in this information age is needed, as well as reorganization of the pertinent environment. Therefore more public libraries have to be built in Daegu as a necessity, and it is urgently needed that the information services be expanded through an organic linkage between local libraries such as between the central library and the branch libraries. This paper aims to provide basic data for building of public libraries in Daegu. To establish an information infrastructure for Daegu, a direction is given for the establishment of a local network of public libraries and ways for improvement are explored. This paper is significant in that, first, it helps in the planning of a local network of public libraries, which plays a crucial role in improving accessibility to information as well as the level of their use; and second, it helps in setting up guidelines for spatial configuration of the user space. As for the method, quantitative review of the information environment is to be done by analyzing the present situation of the public library network in Daegu from the perspectives of region, facility, and space, in order to present a method of user-centered spatial configuration that meets the changes in social roles and forms of information in the contemporary society.

• Journal of Radiation Protection and Research
• /
• v.39 no.3
• /
• pp.150-158
• /
• 2014

Radiation-related practitioners and radiation-treated patients at medical institutions are inevitably exposed to radiation for diagnosis and treatment. Although standards for maximum doses are recommended by the International Commission on Radiological Protection (ICPR) and the International Atomic Energy Agency (IAEA), more direct and available measurement and analytical methods are necessary for optimal exposure management for potential exposure subjects such as practitioners and patients. Thus, in this study we developed a system for real-time radiation monitoring at a distance that works with existing portable device. The monitoring system comprises three parts for detection, imaging, and transmission. For miniaturization of the detection part, a scintillation detector was designed based on a silicon photomultiplier (SiPM). The imaging part uses a wireless charge-coupled device (CCD) camera module along with the detection part to transmit a radiation image and measured data through the transmission part using a Bluetooth-enabled portable device. To evaluate the performance of the developed system, diagnostic X-ray generators and sources of $^{137}Cs$, $^{22}Na$, $^{60}Co$, $^{204}Tl$, and $^{90}Sr$ were used. We checked the results for reactivity to gamma, beta, and X-ray radiation and determined that the error range in the response linearity is less than 3% with regard to radiation strength and in the detection accuracy evaluation with regard to measured distance using MCNPX Code. We hope that the results of this study will contribute to cost savings for radiation detection system configuration and to individual exposure management.