• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.620-628
• /
• 2005

Spatial control of sound is essential to deliver better sound to the listener's position in space. As it can be experienced in many listening environments, the quality of sound can not be manifested over every position in a hall. This motivates us to control sound in a region we select. The primary focus of the developed method has to do with the brightness and contrast of acoustic image in space. In particular, the acoustic brightness control seeks a way to increase loudness of sound over a chosen area, and the contrast control aims to enhance loudness difference between two neighboring regions. This enables us to make two different kinds of zone - the zone of quiet and the zone of loud sound - at the same time. The other perspective of this study is on the direction of sound. It is shown that we can control the direction of perceived sound source by focusing acoustic energy in wavenumber domain. To begin with, the proposed approaches are formulated for pure-tone case. Then the control methods are extended to a more general case, where the excitation signal has broadband spectrum. In order to control the broadband signal in time domain, an inverse filter design problem is defined and solved in frequency domain. Numerical and experimental results obtained in various conditions certainly validate that the acoustic brightness, acoustic contrast, direction of wave front can be manipulated for some finite region in space and time.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.386-390
• /
• 2016

Water aeration is an effective water treatment process, which involves the injection of air or air-water mixture into water treatment reservoir commonly through pipes. The main purpose of water aeration is to maintain healthy levels of dissolved oxygen (DO), which is the most important water quality factor. The pipes' operating conditions are important for controlling the efficiency and effectiveness of aeration process. Many studies have been conducted on two-phase flows in pipes, however, there are a few studies to deal with small s ale in millimeter. The main objective of this study is to perform 2-dimensional two-phase simulations inside various straight pipes using the computational fluid dynamic (CFD) OpenFOAM (Open source Field Operation And Manipulation) tools to examine the influence of flow patterns on bubble size, which is closely related to DO concentration in a water body. The both flow regimes, laminar and turbulence, have been considered in this study. For turbulence, Reynolds-averaged Navier-Stokes (RANS) has been applied. The coalescence and breakage of bubbles caused by random collisions and turbulent eddies, respectively, are considered in this research. Sauter mean bubble diameter and water velocity are compared against experimental data. The simulation results are in good agreement with the experimental measurements.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.41-43
• /
• 2021

Robot Operating System (ROS) has been a prominent and successful framework used in robotics business and academia.. However, the framework has long been focused and limited to navigation of robots and manipulation of objects in the environment. This focus leaves out other important field such as speech recognition, vision abilities, etc. Our goal is to take advantage of ROS capacity to integrate additional libraries of programming functions aimed at real-time computer vision with a depth-image camera. In this paper we will focus on the implementation of an upgraded vision with the help of a depth camera which provides a high quality data for a much enhanced and accurate understanding of the environment. The varied data from the cameras are then incorporated in ROS communication structure for any potential use. For this particular case, the system will use OpenCV libraries to manipulate the data from the camera and provide a face-detection capabilities to the robot, while navigating an indoor environment. The whole system has been implemented and tested on the latest technologies of Turtlebot3 and Raspberry Pi4.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.530-532
• /
• 2021

This paper deals with AI education service that enables developers who have completed basic programming education to program in C/C++ language in order to learn big data and artificial intelligence. In addition, a customized development environment configuration system according to the development environment and how the user implements and tests artificial intelligence are explained. And also it has a function to check the effect on artificial intelligence through manipulation of various internal parameters. It is expected that it will be possible to develop artificial intelligence education services without language restrictions through networks in the future.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.360-360
• /
• 2012

Zn-Sn-O (Zinc-Tin-Oxide; ZTO) thin films have been gaining extensive academic and industrial attentions owing to a semiconducting channel materials applicable to large-sized flat-panel displays. Due to the constituent oxides i.e., ZnO and SnO2, the resultant Zn-Sn-O thin films possess artificially controllable bandgaps and transmittances especially effective in the visible regime. The current approach employed RF sputtering in depositing the Zn-Sn-O thin films onto glass substrates at ambient conditions. This work places its main emphases on the electrical/optical features which are closely related to the combinations of processing variables. The electrical characterizations are performed using dc-based current-voltage characteristics and ac-based impedance spectroscopy. The optical constants, i.e., refractive index and extinction coefficient, are calculated through spectroscopic ellipsometry along with the estimation of bandgaps. The charge transport of the deposited ZTO thin films is based on electrons characteristic of n-type conduction. In addition to the basic electrical/optical information, the delicate manipulation of n-type conduction is indispensible in diversifying the industrial applications of the ZTO thin films as active devices in information and energy products. Ultimately, the electrical properties are correlated to the processing variables along with the underlying mechanism which largely determines the electrical and optical properties.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2003.09a
• /
• pp.75-75
• /
• 2003

Purpose: To investigate whether or not acupuncture of GB34 produces a significant response of the modulation of somatomotor areas by functional magnetic resonance imaging (fMRI) study. Methods: The acupoint, GB34, located in the back of the knee, is known to be effective in recovering motor function after stroke. Using 3T MRI scanner, functional MR imaging of the whole brain was performed in 12 normal healthy subjects during two stimulation paradigms; acupuncture manipulation on GB 34 and sham points. This study investigates the activation of the motor cortex elicited by a soft and an intensified stimulation of GB 34. Three different paradigms were carried out to detect any possible modulation of the Blood Oxygenation Level Dependent (BOLD) response in the somatomortor area to motor stimulation through acupuncture. Results: Group analysis from seven individuals showed that bilateral sensorimotor areas (BA 3,4,6 and 7) showed stimulation related BOLD signal contrast of approximately 6% whereas very few areas were activated when sham stimulation is given. Conclusions: The present study shows that acupuncture fMRI study can be safely conducted in 3T MRI environment, and acupuncture stimulation in GB34 modulates the cortical activities of the soma- to motor area in human. The present findings may shed light on the CNS mechanism of motor function by acupuncture and form a basis for future investigations of motor modulation circuits in the stroke patients. Acknowledgement: This study was supported by a grant of the Mid and Long Term Nuclear RID Plan Program, Ministry of Science and Technology, Republic of Korea.

• Proceedings of the Korean Society of Plant Biotechnology Conference
• /
• 2002.04a
• /
• pp.49-58
• /
• 2002

Oxidative stress derived from reactive oxygen species (ROS) is one of the major damaging factors in plants exposed to environmental stress. In order to develop the platform technology to solve the global food and environmental problems in the 21s1 century, we focus on the understanding of the antioxidative mechanism in plant cells, the development of oxidative stress-inducible antioxidant genes, and the development of transgenic plants with enhanced tolerance to stress. In this report, we describe our recent results on industrial transgenic plants by the gene manipulation of antioxidant enzymes. Transgenic tobacco plants expressing both superoxide dismutase (SOD) and ascorbate peroxidase (APX) in chloroplasts were developed and were evaluated their protection effects against stresses, suggesting that simultaneous overexpression of both SOD and APX in chloroplasts has synergistic effects to overcome the oxidative stress under unfavorable environments. Transgenic tobacco plants expressing a human dehydroascorbate reductase gene in chloroplasts were showed the protection against the oxidative stress in plants. Transgenic cucumber plants expressing high level of SOD in fruits were successfully generated to use the functional cosmetic purpose as a plant bioreactor. In addition, we developed a strong oxidative stress-inducible peroxidase promoter, SWPA2 from sweetpotato (Ipomoea batatas). We anticipate that SWPA2 promoter will be biotechnologically useful for the development of transgenic plants with enhanced tolerance to environmental stress and particularly transgenic cell lines engineered to produce key pharmaceutical proteins.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.09a
• /
• pp.11-12
• /
• 2005

With the great advances in process understanding, sensor and instrumentation technology and modelling capability it is important to ask what if any practical benefits can the lake manager and operator look forward to. Here, we examine some of the more important problems facing operators of drinking reservoirs, hydro-lakes and lakes used predominantly for recreation and the environment. In drinking reservoirs the main problems originate from increased loadings of nutrients leading to increased biomass and biomass that may give rise to toxins, of anthropogenic chemicals such as metals and synthetic organics and of pathogens of different types. Hydro-lakes are predominantly plagued by problems arising from low oxygen levels in the hypolimnion and in recreational and environmentally sensitive lakes the biggest challenge for the operator is to maintain an existing or establish a new trophic hierarchy or protect the water body from foreign species. The control variables that are at an operator's disposal are the choice of lake water level, the modification of the water colunm stratification via a de-stratification system, the modification of the lake flow path with flow intervention. curtains, intervention in the catchments to modify the loadings flowing into a lake, manipulation of the trophic chain with introduction of new species and chemical dosing, the latter being of marginal use in a large lake. Each of these options is cost effective under certain-circumstances. We endeavour to provide a users guide for their application and show how, especially new instrumentation and modelling methodologies may be used to achieve an effective intervention.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.942-947
• /
• 2006

In KOWACO, flow measurement system using PDA has been developed and used since 2004. Even though this system has improved the reliability of the measured flow data, it still has some problems caused by the internet-based data manipulation scheme. We found that this kind of data handling method is not suitable because it causes frequent communication problems especially in fringe areas. To solve this problem, the structure and algorithms of existing system has been analyzed and an improved system is proposed. Besides, improvement study on the rate of change and the uncertainty of the flow data have been performed as well as the communication method between the Microwave Water Surface Current Meter and PDA adopting the state-of-the-art IT technology.

• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.75-79
• /
• 1999

Geo-features play a key role in object-oriented or feature-based geo-processing system. So the strategy for how-to-model and how-to-manage the geo-features builds the main architecture of the entire system and also supports the efficiency and functionality of the system. Unlike the conventional 2D geo-processing system, geo-features in 3B GIS have lots to be considered to model regarding the efficient manipulation and analysis and visualization. When the system is running on the Web, it should also be considered that how to leverage the level of detail and the level of automation of modeling in addition to the support for client side data interoperability. We built a set of 3D geo-features, and each geo-feature contains a set of aspatial data and 3D geo-primitives. The 3D geo-primitives contain the fundamental modeling data such as the height of building and the burial depth of gas pipeline. We separated the additional modeling data on the geometry and appearance of the model from the fundamental modeling data to make the table in database more concise and to allow the users more freedom to represent the geo-object. To get the users to build and exchange their own data, we devised a file format called VGFF 2.0 which stands for Virtual GIS File Format. It is to describe the three dimensional geo-information in XML(eXtensible Markup Language). The DTD(Document Type Definition) of VGFF 2.0 is parsed using the DOM(Document Object Model). We also developed the authoring tools for. users can make their own 3D geo-features and model and save the data to VGFF 2.0 format. We are now expecting the VGFF 2.0 evolve to the 3D version of SVG(Scalable Vector Graphics) especially for 3D GIS on the Web.