• Journal of Power System Engineering
• /
• v.2 no.3
• /
• pp.27-33
• /
• 1998

The room temperature and air conditioning load in the underground space have been investigated numerically by the unsteady heat conduction equation. The model room has 3 m in height and 10 m in width, and it's position in the underground depth are 0.5 m to 5 m. When the room was located around surface, the room temperatures were strongly influenced by the atmosphere. But the underground depth is more than 2 m, the yearly temperature amplitude was small and the temperature phase was delayed. Up to 5 m of the depth, the cooling and heating load was decreased rapidly, but over 10 m of the depth, the air conditioning load was constant.

• Journal of Power System Engineering
• /
• v.8 no.2
• /
• pp.24-30
• /
• 2004

In this paper, the optimal heating pattern of the furnace is sought to reduce the unnecessary energy loss. A finite difference method was used to estimate the transient temperature field of the billet in a furnace. Heat conduction equations were used in the interior nodes of the billet, while energy balances for conduction, convection, and radiation were considered in the boundary nodes. Several heating patterns for the furnace were tested and subsequently compared each other. The results showed that the temperature in the preheating zone should be set to relatively low. The temperature distributions of the billet are quite different from each other when different heating pattern are used, even though the heating patterns have the same amount of energy consumption. It reveals that there exists an optimal heating pattern to save the energy loss.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.2
• /
• pp.105-110
• /
• 2012

This paper designs the high-efficiency and the low-cost drive system of the smallsize electric vehicles (EVs). The power circuit for driving the dc motor is designed by considering both the cost and efficiency. In order to reduce the conduction loss of MOTFET and diode for controlling an armature voltage, some MOSFETs and diodes at the armature are in parallel connection. An operating sequence for both the field current and the armature voltage according to the accelerator pedal angle is suggested for changing smoothly the rotating direction of dc motor. Through the simulation studies, the performances of the proposed methods are verified.

• Journal of Power System Engineering
• /
• v.14 no.4
• /
• pp.17-22
• /
• 2010

본 연구는 구의 과도 열전도에 의한 열손실을 계산하는 데 있어, 외부의 경계조건인 대류의 조건에 해당하는 상황을 상수 및 변수로 가정하였을 경우의 열전달문제를 해석한 것이다. 이 문제를 해결하기 위해 집중열용량법을 사용하고 있으며, 대류열전달계수의 값이 온도의 함수로 변한다고 가정하여 계산하였다. 계산을 수행한 결과 대류경계조건의 값을 상수로 가정한 경우가 열손실이 높이 평가된다는 것을 알았고, 이러한 경향을 상관식으로 정리하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.53-54
• /
• 2000

Measurements of the direct current resistivity, on multiwalled carbon nanotubes(MWNT) for field electron emitter source that had been screen printed in a thick film form were made as a function of temperature T in the range of 1.7K-390K. In this measuring temperature range, the electrical resistivity for the MWNT show that the main contribution to the conductivity comes form carries that hop directly between localized states executing variable range hopping processes. This thick-film form system for large area display showed a high bright light emission as well as very low turn-on field as like an individual MWNT system at room temperature. Furthermore, the electron emission characteristics followed well typical Fowler-Nordheim conduction under the vacuum.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.290-290
• /
• 2011

In this study Diamond-like carbon (DLC) films were deposited on p-type Si substrates using a Radio-Frequency magnetron Sputtering system. The DLC film was deposited by bombarding graphite target with a N2/Ar plasma mixture with various conditions: substrate, pressure, deposition time, temperature of substrate, power and ratio of gas mixture. The effect on the conduction and hardness of DLC thin films were investigated. The conduction of DLC films were measured by I-V measurement. In addition, Raman analysis was performed to study the chemical bonding structure. The hardness was measured by Nano indentation. Atomic Force Microscopy was used for determined surface morphology of DLC film.

• Journal of the Semiconductor & Display Technology
• /
• v.11 no.2
• /
• pp.23-26
• /
• 2012

The monodispersed polystyrene spheres were prepared by emulsion polymerization in aqueous alcohol system. They coated with silver by reduction of silver ion percolated on the surface of them. The spherical hollow type silver has been prepared by dissolving polystyrene with toluene. Epoxy resin compositions with spherical hollow type silver were manufactured, which were composed of a bisphenol F type epoxy resin (RE-304S), amine type hardener (Kayahard AA), and 1-benzyl 2-methyl imidazole (1B2MI) as catalyst. The electrical conductivity with silver content ratio were investigated after cure, the percolation threshold weight ratio for conductance in this epoxy resin system was obtained above the 70 wt% of silver.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.1
• /
• pp.36-44
• /
• 2014

The conventional central photo voltaic inverters have several problems. First, shadow problem in each solar panel, and high DC voltage problem from each panel because of concentration to one central inverter. Therefore, module integrated inverter is proposed to solve these problems. The inverter should be small and cost effective. The cost and size in the inverter depend on the inductor. So the switching frequency should be increased to reduce the inductor and total size, but there is a problem in efficiency because of the losses in turn-on and turn-off. In the paper, the critical conduction mode(CRM) switching method is adopted to reduce the switching loss and interleaving method is proposed to increase the efficiency in Flyback converter. Finally, the validity of the proposed scheme is investigated with simulated and experimental results for a prototype system rated at 200W.

• Journal of Genetic Medicine
• /
• v.15 no.2
• /
• pp.107-109
• /
• 2018

X-linked Charcot-Marie-Tooth disease type 1 (CMTX1) is caused by the mutation in GJB1 gene, characterized by the transient central nervous system involvement and long standing peripheral polyneuropathy which does not fulfill the criteria of demyelination or axonopathy. We describe a 37-year-old man with progressive bilateral leg weakness since his early teen. He suffered transient right hemiparesis, followed by quadriparesis at 14 years of age. When we examined him at 37 years of age, he presented a distal muscle weakness on lower extremities with a sensory symptom. The nerve conduction study demonstrated a motor conduction velocity between 26 and 49 m/s. The whole exome sequencing revealed a novel variant c.136 G>A in GJB1. This report will raise awareness in this rare disease, which is frequently misdiagnosed early in its course.

• Bulletin of the Korean Chemical Society
• /
• v.7 no.5
• /
• pp.341-346
• /
• 1986

The electrical conductivity of the system ${\alpha}-Fe_2O_3-CoO$ was measured in the temperature range 200-1000$^{\circ}C$ and PO$_{2}$ range 10$^{-7}-2{\times}10^{-1}$ atm. Possible defect models were suggested on the basis of conductivity data, which were measured as a function of temperature and of oxygen partial pressure. The observed activation energies were 0.50 eV and 1.01 eV in the low- and high-temperature regions, respectively. The observed conductivity dependences on PO$_{2}$ were ${\sigma}\;{\alpha}\;PO_2^{-1/6}$ in the PO$_{2}$ range $10^{-7}-10^{-4}$ atm and ${\sigma}\;{\alpha}\;PO_2^{-1/4}$ at PO$_{2}$ 's of $10^{-4}-2{\times}10^{-1}$ atm at temperatures from 300-1000$^{\circ}C$. An extrinsic electron conduction due to an Vo defect and an intrinsic electron conduction due to an Fei' defect were suggested at different temperature and oxygen partial pressure regions, respectively.