• International Journal of Air-Conditioning and Refrigeration
• /
• v.16 no.1
• /
• pp.15-21
• /
• 2008

Air-cooled split-type air conditioners (AC) are very popular in high-rise residential and commercial buildings in Korea. The performance of such AC systems varies significantly with system characteristics and environmental conditions. Particularly, the outdoor condensing unit of the system, if poorly cooled due to high density of AC distribution and restricted outdoor space, will result in large decrease of cooling efficiency and increase of electrical energy consumption and may further jeopardize the system reliability. This paper presents a numerical analysis on the thermal and energy performance of a group of air-cooled air conditioners installed at a courtyard of a high-rise building. The study introduces a series of new energy performance indices to assess the group performance of the AC condensers with different outdoor unit layouts. The results not only indicate the COP of the systems, but also quantify the system capacity and energy consumption. The evaluation method and indices developed are useful for guiding the design of the distribution plan of the AC units at building re-entrants.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.2
• /
• pp.134-143
• /
• 2001

This paper presents the characteristics of flank and tip seal leakage in a scroll compressor for air-conditioners with R-22 under actual operating conditions. It is well known that the leakage has significant effect on the performance of the scroll compressor. Experiments were performed by using indirect method for measuring mass flow rate passing through flank and tip seal under actual operating conditions, In addition, an analytical model for tip seal leakage was developed to investigate tangential and radial leakage observed at grooves and contact points of tip seals. For low oil concentration, theoretical results were compared with experimental data to verify the analytical model. As a result, leakages through flank and tip seal parts were evaluated as afunction of pressure ratio, orbiting angle, discharge pressure, tip clearance, and leakage point. It was also found that the tip seal leakage was considerable even though the tip seal provided adequate sealing effect.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.5
• /
• pp.418-425
• /
• 2006

An AHX (Accumulator Heat exchanger) consists of a commercial accumulator and an inner heat exchanger located inside of the accumulator. The AHX is used in multi air-conditioners to assure that liquid-phase refrigerant enters into the expansion device. This purpose is achieved by heat transfer between the refrigerant leaving the evaporator and the refrigerant leaving the condenser. In this study, the effects of AHX on the performance of a refrigeration system using R-22 were measured and the test results were analyzed. The operating characteristics of the refrigeration system with the AHX are considerably different from those without the AHX. Therefore, it is required to determine optimum refrigerant charge and optimum operating conditions when the AHX is used in the refrigeration system having a constant flow-area expansion device such as capillary tube.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.3
• /
• pp.315-324
• /
• 2000

R-410A, R-407C, and four refrigerant mixtures composed of R-32, R-l34a, R-l43a, R-l52a, R-600(butane), and R-600a(isobutane) were tested in an attempt to replace R-22 used in most of the residential air conditioners. The performance evaluation was carried out in a psychrometric calorimeter test facility using a residential spilt type air conditioner under the KS rating conditions. Except for the lubricant and hand-operated expansion valve, the other parts of the air conditioner were the same with the commercial system. Performance characteristics were measured; COP, capacity, compressor power, and VCR. R-410A was shown to have 5.5% higher COP and 3.5% lower capacity than R-22. R-32/134a/600a (42.8/ 46.0/11.2 wt%) mixture have the best performance among the four refrigerant mixtures composed of hydrofluorocarbon and hydrocarbon. This inixture have 3.0% lower COP and 1.6% lower capacity than R-22.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.4
• /
• pp.558-564
• /
• 1999

A series of experiments were conducted to determine the effects of standard (ST), long-term (LT), and expander (EX) conditioners on nutritional value of phase-three nursery and finishing swine diets. In Exp. 1, 180 pigs (average initial BW of 11.7 kg) were fed com-soybean meal based diets (1.3% lysine) during a 28 d growth assay. Gain/feed was improved (p<0.004) with pelleting and pellet durability index (PDI) increased with degree of conditioning (LT>ST). However, there was no advantage for LT vs ST conditioning in rate or efficiency of gain (p>0.5). In Exp. 2, 180 pigs (average initial BW of 10.4 kg) were fed con-soybean meal based diets (0.9% lysine) during a 28 d growth assay, Pelleted diets tended to support greater ADG (p<0.08) and gain/feed (p<0.002) with no marked advantage from EX vs ST conditioning. In Exp 3, a total of 70 barrows (average initial BW of 54 kg) was used in a growth assay to determine the effects of feeding a com-soybean meal based diet processed with a standard (ST) steam conditioner, a long-term (LT) steam conditioner, and an expander (EX) conditioner. The conditioned diets were fed as mash (M) or pellets (P) to give a $2{\times}3$ factorial plus a meal control. PDI increased with degree of conditioning (EX>LT>ST). There was a trend (p<0.07) for greater ADG in pigs fed diets that had been thermally conditioned. Also, there was a general advantage in gain/feed with pelleting (p<0.04), but this advantage was pronounced only with standard conditioning. Indeed, the greatest gain/feed was observed for pigs fed the expander treatments (p<0.03) and the expander mash was used as efficiently as the expander pellets. There was no difference in backfat thickness among pigs fed the treatments (p>0.3). but the more extreme the processing technique. the greater the incidence and severity of stomach lesions (p<0.04). These results suggest maximum rate and efficiency of growth with pelleting after standard steam conditioning or simply feeding an expanded mash.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.6
• /
• pp.685-691
• /
• 1996

This experiment was conducted to investigate the effect of some soil conditioners, such as polyvinylalcohol(PVA), zeolite and perlite, on the changes of soil physical properties and on tobacco growth in paddy-upland rotated field. Soil conditioners were treated at the rates of 120kg in PVA, 500kg in zeolite and perlite per l0a, respectively. Ratio of soil aggregates formed from the treated plots tended to. be higher than those from the control in the order of PVA > perlite > zeolite. The wet aggregate stability, mean weight diameter, moisture retention and air permeability from the treated plots tended to be higher than those from the control. Amounts of water-stable aggregates of PV A-treated soil increased with higher soil moisture showing a peak at 50% of moisture content. But with respect to particle of size aggregate formed for crop growth and workability in field, it was presumed that 40% of soil moisture content would be most desirable. Visual characters of soil surface throughout the experiment clearly showed that treated soils were maintaining better surface roughness and porosity than control, but difference in water stable aggregates among treated plots tended to be narrowed. The growths of tobacco, espacially its root zone were better in conditioner treated plots than in non-treated plot showing best in PVA-treated soil.

• Korean Journal of Soil Science and Fertilizer
• /
• v.20 no.1
• /
• pp.29-34
• /
• 1987

This experiment was designed to find out the effects of soil conditioner, Polyacrylamide (PAM) and Bitumen, on the changes of soil aggregate properties and crop yields. The soil conditioners were treated at the rates of 0.5% and 1% to sandy loam and silty clay loam soils. The aggregate stability, wetting angle, mean weight diameter and air permeability were analyzed. Pot experiments were carried out to investigate the soybean growths and soil property changes after the soil conditioners were sprayed to surface soils. Soil aggregate stability was increased remarkably by the soil conditioner, PAM and Bitumen, treatments. PAM was more effective in sandy loam than silty clay loam, but Bitumen was better in silty clay loam. Wetting angle of the soil was changed slightly by PAM treatment, but it was greatly changed to hydrophobic by Bitumen treatment. Air permeability, water infiltration rate and moisture retention of the soils were increased by surface application of soil conditioners, PAM and Bitumen. The growths of soybean in conditioner applicated pots were better than those of untreated pots from early stage, and the yields were increased 6-13%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.10
• /
• pp.3794-3801
• /
• 2010

This study evaluated the linear dimensional changes with the factor of time and thickness using of three commercially available tissue conditioners (Coe-Comport, Visco-Gel, Soft-Liner). The thickness of materials were changed (1.5mm, 3.0mm) and the percentage changes in dimension were measured at 1h(baseline), 12h, 24h, 3 days and 7days after specimen preparation. The obtained data were analyzed by ANOVA with the SAS/PC statistical package. From the results, large differences appear between the various tissue conditioners. The results suggested that the period recommended for forming functional impression would be 36h to 3days after insertion in the mouth. Depending on the type of tissue conditioner over time, as there were significant differences in the elastic change(p<0.05). Tissue conditioner of the 1.5mm, 3.0mm thickness were significantly different by the dimensional stability(p<0.05). Elastic deformation of the ideal itself, and resilient when compared only the look, Visco-Gel 3.0mm group, stability was the most stable volume. In addition, it is important to select tissue conditioners suitable for functional impression because of the wide range of dimensional stability among the materials.

• Korean Journal of Medicinal Crop Science
• /
• v.15 no.3
• /
• pp.177-182
• /
• 2007

This study was conducted to produce high quality ginseng seedlings by improvement of the physical properties of nursery soil. In order to select optimum nursery conditions, nursery types were treated with the yangiik nursery and semi-yangiik nursery. Soil conditioners were treated with two different materials of puffed rice husks and perlite. This experiments were tested at Gyunggido Agricultural Research and Extention Services, Hwaseng, from 2003 to 2004. Soil permeability was better at the plot of yangiik nursery than that of semi-yangjik nursery, and was better at plot of puffed rice husks than that of perlite. Soil porosity was improved 2.2% at plot of yangjiik nursery compare at that of semi-yangjik nursery, and was improved 2.0% at plot of puffed rice husks compared to control. There was no difference in the number of ginseng plants per kan among treatments. Root length was longer at plot of yangjik nursery than that of semi-yangjik nursery. More available ginseng plants per kan were obtained from the plot of yangjik nursery by more 252 seedlings than that of semi-yangjik nursery, but there was no significant difference between soil conditioners. The number of available seedlings per kan produced from yangjik nursery was 21.7% higher than those produced by semi-yangjik nursery. The number of available seedlings per kan produced from plot of puffed rice husks was 16.3% higher than that of control.

• Korean Journal of Clinical Laboratory Science
• /
• v.49 no.4
• /
• pp.435-438
• /
• 2017

Nontuberculous mycobacteria (NTM) contains M. avium-intracellular complex (MAC), M. fortuitum, M. chelonae, M. abscessus, M. kansasii, etc., which causes infections in swine, poultry, and other animals. These bacteria are opportunistic pathogens that can contaminate people, and in doing so, cause various social economic problems. This study proved that NTM are also present in air conditioners of multiuse facilities in frequently visited populated areas. The results of this study are meaningful because they showed that pathogenic microbes can live in the surroundings and cause diseases to people with impaired immunity. This study used the AFB stain, L-J medium culture, and PCR method for the detection of MTB and NTM in air conditioner dust. MTB was not detected in any of the collected samples, while NTM was detected in 2 out of 40 samples (5%). Most people living in the modern environment cannot avoid being exposed to air conditioners so special attention is needed for sanitary inspections and the management of air conditioners. Moreover, it is important to study NTM through various individuals, accumulate the related data and establish the methods and standards of hygiene management system to reduce NTM infections in public areas. Moreover, it would be necessary to identify the precise species of NTM through DNA sequencing and evaluate the effects of NTM on the pulmonary tuberculosis in immunodeficiency patients.