• International Journal of Quality Innovation
• /
• v.3 no.2
• /
• pp.74-83
• /
• 2002

Process capability indices as an important kind of indices are intended to provide single-number assessments of the inherent process capability to meet specification limits on quality characteristic(5) of interest. In this paper the condition for the application of process capability indices is analyzed. On the basis of process capability indices, dynamic process capability indices as a new kind of indices to show the current process capability are discussed and the condition for the application of dynamic process capability indices is exhibited. Comparison between process capability index and dynamic process capability index and comparison between $D_p$ and $D_pk$ are made and the conclusions provide the approach for process control. According to the requirement of process capability indices provided by customer, quality control based on process capability indices dynamic process capability indices is discussed.

• Ocean and Polar Research
• /
• v.29 no.4
• /
• pp.339-348
• /
• 2007

In this work, we compared the characteristics of three benthic biotic indices (BPI, AMBI, BIBI) which indicates the health condition of benthic communities in Masan Bay, Korea where anthropogenic impacts have been concentrated. Also we evaluated the usefulness of these benthic indices and some problems if they were applied to the Korean coastal waters. For this we used the macrozoobenthos data collected using van Veen grab ($0.1\;m^2$) at 21 sites in Masan Bay in February and August 2004. Based on the BPI values, two stations in the inner bay were found in a very hard polluted condition and three stations in the middle bay were also in a highly polluted condition. Only one station located in the bay mouth was in a normal condition. The inner bay stations showed very high AMBI values (${\geq}5.0$), indicating a highly polluted condition. The bay mouth station was assessed in a moderately polluted condition. The overall BIBI values in Masan Bay were in the range between 1.0 and 3.0. The inner bay stations showed low BIBI values (${\leq}2.0$) in the severely degraded condition. The bay mouth station with high BIBI value over 3.0 was assessed as a normal condition. All three benthos indices showed that macrozoobenthic communities in the inner bay were in a seriously polluted condition all year round, and macrobenthic faunas in the bay mouth seemed in a bad healthy condition (slightly polluted) based on AMBI during summer season. These three benthic biotic indices showed the similar assessment result, and thus we consider that each of them is a useful tool for the assessment of coastal benthic ecosystems under the organic enrichment in sediment.

• Journal of Environmental Science International
• /
• v.15 no.3
• /
• pp.261-269
• /
• 2006

In this study, an optimization technique was developed from the application of allocation rule. The results obtained from the water supply analysis and reliability indices analysis of Andong dam and Imha dam which are consist of parallel reservoir system are summarized as the followings; Allocation rule(C) is effective technique at the parallel reservoir system because results of the water supply analysis, storage analysis and reliability indices analysis is calculated reasonable results. Also, reliability indices analysis results are not sufficient occurrence based reliability or quantity based reliability. Thus reliability indices analysis are need as occurrence based reliability, quantity based reliability vulnerability, resilience, average water supply deficits and average storage. And water supply condition is better varying water supply condition than constant water supply condition.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.1 s.232
• /
• pp.59-66
• /
• 2005

In this paper, a robust stationary Kalman filter is designed by minimizing selected performance indices so that it is less sensitive to uncertainties. The uncertainties include not only stochastic factors such as process noise and measurement noise, but also deterministic factors such as unknown initial estimation error, modeling error and sensing bias. To reduce the effect on the uncertainties, three performance indices that should be minimized are selected based on the quantitative error analysis to both the deterministic and the stochastic uncertainties. The selected indices are the size of the observer gain, the condition number of the observer matrix, and the estimation error variance. The observer gain is obtained by optimally solving the multi-objectives optimization problem that minimizes the indices. The robustness of the proposed filter is demonstrated through the comparison with the standard Kalman filter.

• International Journal of Highway Engineering
• /
• v.6 no.4 s.22
• /
• pp.55-63
• /
• 2004

It is necessary to use the pavement condition index which evaluates the conditions of pavement objectively and is utilized for effective pavement management. PSI, MCI, UPCI are currently used indices, however, they do not play a role as general indices due to their unfair considerations only for users or managers. Thus, this paper pointed out the problems of current indices and developed a new pavement condition index. Also, a sensitivity analysis on the material properties was conducted for the proposed index using the real data obtained from fields. The material properties affected the index in order of surface thickness, asphalt viscosity and asphalt content.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.889-893
• /
• 2004

This work presents a study on development of a practical and quantitative technique for assessment of the structural health condition by piezoelectric impedance-based technique associated with longitudinal wave propagation method. The bolt fastening condition is adjusted by torque wrench. In order to estimate the damage condition numerically, three damage indices, impedance peak frequency shift ${\Delta}F$ is proposed in this paper. Furthermore, an assessment method is described for estimation of the damage by using these three damage indices.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.25 no.6
• /
• pp.283-292
• /
• 2021

In this study, a structural health monitoring system for cable-stayed bridges is developed. In the system, condition assessment of the structure is performed based on measured records from seismic accelerometers. Response indices are defined to monitor structural safety and serviceability and derived from the measured acceleration data. The derivation process of the indices is structured to follow the transformation from the raw data to the outcome. The process includes noise filtering, baseline correction, numerical integration, and calculation of relative differences. The system is packed as a condition assessment program, which consists of four major processes of the structural health evaluation: (i) format conversion of the raw data, (ii) noise filtering, (iii) generation of response indices, and (iv) condition evaluation. An example set of limit states is presented to evaluate the structural condition of the test-bed and cable-stayed bridge.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.2
• /
• pp.689-700
• /
• 2017

This paper presents an effective approach for wind turbine (WT) condition assessment based on the data collected from wind farm supervisory control and data acquisition (SCADA) system. Three types of assessment indices are determined based on the monitoring parameters obtained from the SCADA system. Neural Networks (NNs) are used to establish prediction models for the assessment indices that are dependent on environmental conditions such as ambient temperature and wind speed. An abnormal level index (ALI) is defined to quantify the abnormal level of the proposed indices. Prediction errors of the prediction models follow a normal distribution. Thus, the ALIs can be calculated based on the probability density function of normal distribution. For other assessment indices, the ALIs are calculated by the nonparametric estimation based cumulative probability density function. A Back-Propagation NN (BPNN) algorithm is used for the overall WT condition assessment. The inputs to the BPNN are the ALIs of the proposed indices. The network structure and the number of nodes in the hidden layer are carefully chosen when the BPNN model is being trained. The condition assessment method has been used for real 1.5 MW WTs with doubly fed induction generators. Results show that the proposed assessment method could effectively predict the change of operating conditions prior to fault occurrences and provide early alarming of the developing faults of WTs.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.45
• /
• pp.347-356
• /
• 1998

For assessing the capability of a process, the quantification of process location and variation is central to understanding the quality of units produced from the manufacturing process. Conventional process capability indices is insufficient to drive out the information for process condition, furthermore it is very difficult to evaluate the process capability accurately when the target value is not consistent with the center of specification, and/or the shape of distribution is changed, but the process incapability indices is enable to provide more detailed information to evaluate the process capability by dividing information about the process mean and variance. In this paper, we have a brief review and comparison about these indices, provide an understanding of the relationships between the process capability indices and the incapability indices. And we explore the strengths and weakness of these indices as they apply to normally distributed process, and to examine the effect that non-normality has on these indices.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.154-154
• /
• 2022

The frequency of natural disasters, including floods and drought events, driven by climate change has increased in recent times. Investigating the climate regimes and the roles of climate variables are indispensable to forestall future climate change-related disasters. This study compares the variability of two popular and widely used climate indices i.e., the United Nations Environment Programme (UNEP) aridity index and the Modified De-Martonne (MDM) index to assess the trend of climate change in the Chungcheong provinces of South Korea. The trend of annual and monthly climate indices was conducted using a non-parametric Mann-Kendall test and Kolmogorov-Smirnov normality test with daily climate data of 48 years (1978-2020) from 10 synoptic stations. The findings indicate that UNEP and MDM indices had a wet climate regime for the annual trend, with the UNEP index indicating a relatively humid trend of 60% humid, 20% semi-arid, and 10% sub-humid for the 48-years study period. However, the MDM index showed a high frequency of a severe wet climatic condition followed by the semi-arid condition. The months of July and August had the highest occurring frequency of the wet climatic condition (90%) for both UNEP and MDM indices. Comparing the two provinces, Chungnam showed a relatively wetter climatic condition using the UNEP index, while the MDM index indicated no significant regional difference in climate regime between the two provinces. The Kolmogorov-Smirnov normality test showed that all the 10 stations are normally distributed for monthly climate conditions at a 5% significant level in the two provinces except five stations for UNEP index and four stations for MDM index in the month of January.