• Development and Reproduction
• /
• v.11 no.2
• /
• pp.97-104
• /
• 2007

This study describes the spermatogenesis and sperm ultrastructure of the spiny top shell, Batillus cornutus using light and electron microscopy. The spiny top shells were collected by divers in the coastal water of Wandogun, Cheollanamdo, Korea(N $34^{\circ}13'$, E $126^{\circ}47'$) at May 2003. Spiny top shells of $60.0{\sim}69.9\;mm$ in shell height were used in this study. The testis comprises many spermatogenic follicles which contains germ cells in different developmental stages. The primary spermatocytes in the pachytene stage were characterized by synaptonemal complexes. The early spermatids were characterized by appearance of Golgi complex, increased karyoplasmic electron density and tubular mitochondria. In early spermatid the mass of proacrosomal granules consists of numerous heterogeneous granules with high electron density. From the mid-stage of spermiogenesis the well-developed mitochondria aggregate posterior to the nucleus, and surround the proximal and distal centrioles. In this stage, proacrosomal granules are condensed and form a acrosome with thin envelope. During the late spermiogenesis, the acrosome begins to elongate and then became conical. The sperm consists of head, mid-piece and tail. The head comprises a round nucleus and a conical acrosome. Acrosomal rod of microfibrous is observed between nucleus and acrosome. Five mitochondria observed in mid-piece. And tail has the typical "9+2" microtubular system originates from the centrioles.

• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.1070-1078
• /
• 1998

Thermodynamic analysis on carbon dioxide reforming of methane was performed using a computer program which can handle condensed species in the products, and the reforming experiments were conducted over $Al_2O_3$, $La_2O_3$, ZSM-5, MCM-41, KIT-1 supported nickel catalysts, and a commercial ICI 46-1. It was estabished that a system which consists of $CH_4$, $CO_2$, CO, $H_2$, $H_2O$, and C is appropriate for theoretical equilibrium calculations and addition of water vapor or oxygen was found to diminish the contribution of carbon dioxide in reforming. Silicate molecular sieve-supported catalysts such as Ni/ZSM-5, Ni/MCM-41, Ni/KIT-1 were effective for high $CH_4$ and $CO_2$ conversions as well as for high CO yield. Coke formation was suppressed when CaO was added as a promoter. Ni/Ca/KIT-1 which contains 10% Ni with 3% Ca showed conversion approaching equilibrium levels above $650^{\circ}C$ and maintained constant activity over 20 h. Despite increased space velocity, relatively high conversion and CO yield were observed.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.12
• /
• pp.2125-2134
• /
• 2000

This research was to develope the economical treatment processes of the landfill leachate to meet the legal discharge standards. To achieve this purpose, experiments were conducted in laboratory to choose the optimum process and to obtain the design factors before a pi!ot-scale test. The concept of the process developing in this research was using the reverse osmosis system. The submerged membrane bio-reactor was used to achieve pre-treatment of reverse osmosis system and the concentrate was treated by evaporator with land fill gas as a fuel. The results of the research showed that SS, $BOD_5$, $COD_{cr}$, $NH_4{^+}-N$ and T-N were removed 99.0%, 43.0%, 12.9%, 48.5% and 18.7% respectively in the submerged membrane bio-reactor. The reverse osmosis system could remove $BOD_5$, $COD_{cr}$, $NH_4{^+}-N$ and T-N as an efficiency of97.5%, 97.6%, 79.7% and 85.4% respectively. The evaporator could remove $COD_{cr}$, $NH_4{^+}-N$ and T-N as an efficiency of 90.5%, 50.6% and 63.3% respectively. However the condensed water of the evaporator was not satisfied the legal standard and should be treated in reverse osmosis with the pre-treated leachate.

• Journal of the Korean Chemical Society
• /
• v.21 no.4
• /
• pp.293-303
• /
• 1977

Cellulosic organic solid wastes such as bark and sawdust, and filter papers as a pure cellulose were pyrolyzed at $300^{\circ}C$ under nitrogen current and mixed current of nitrogen and air. Amounts of condensates collected in air, water, and dry ice-acetone cooling traps, noncondensable gases, and carbonized residues were surveyed. The components of volatile liquids condensed in dry ice-acetone trap were separated by means of gas chromatograph and identified by retention times and syringe reactions. Pyrolysis under nitrogen current produced 13.4∼29.6${\%}$ of tar, 0.01∼0.12${\%}$ of aqueous liquids, 0.24∼1.43${\%}$ of volatile liquids, 9.84∼42.41${\%}$ of noncondensable gases, and 44.0∼65.81${\%}$ of carbonized residues. Pyrolysis under mixed current decreased tar and condensable liquids, but increased noncondensable gases.Volatile liquids collected under nitrogen current separated into the same 19 components by Porapak Q column regardless of the materials and only difference among materials was relative amounts of components. Volatile liquids collected under mixed current separated into six components and mainly lower molecular weight compounds such as methanol and formaldehyde were produced. According to the retention times and syringe reactions, methanol, formaldehyde, acetone, acetaldehyde, acetic acid, and three other compounds presumably containing hydroxyl group in the molecular structure were identified out of 19 compounds.

• Development and Reproduction
• /
• v.20 no.4
• /
• pp.289-296
• /
• 2016

This report describes the sex differentiation of the Korean rose bitterling, Rhodeus uyekii, from hatching to 170 days post-hatch (DPH) in relation to total length (TL), body weight (BW), and integral water temperature (IWT). The growth curve of TL from just hatching to 83 DPH was $5.144e^{0.045t}$ ($R^2=0.961$; t, time), and that of BW was $2.398e^{0.086t}$ ($R^2=0.725$). Primordial germ cells (PGCs) were observed at 17 DPH (7.9 mm TL, 3.74 mg BW, $374^{\circ}C$ IWT), and thereafter began to protrude into the peritoneal cavity. At 21 DPH ($9.2{\pm}0.14mm$ TL, $4.8{\pm}0.07mg$ BW, $462^{\circ}C$ IWT), some PGCs contained condensed chromatin and oocyte were observed in meiotic prophase. In contrast to the ovaries, which grew gradually after sexual differentiation, testes began multiplying at 25 DPH (10.1 mm TL, 5.42 mg BW, $550^{\circ}C$ IWT), when testicular differentiation was first identified, and multiplied continuously thereafter. At 33 DPH (11.2 mm TL, 10.5 mg BW, $726^{\circ}C$ IWT), the developing testes contained spermatogonia that exhibited mitotic activity. No spermatocyte or sperm cell was observed until 83 DPH (18.9 TL, 48.2 mg BW, $1,826^{\circ}C$ IWT). At 170 DPH (32.5 mm TL, 270.1 mg BW, $3,740^{\circ}C$ IWT), which was the end point of this study, the mature ovaries showed germinal vesicle breakdown, while the mature testes contained observable spermatocytes and sperm cells. These results allow us to identify the sex differentiation type of the Korean rose bitterling as differentiated gonochoristic.

• Restorative Dentistry and Endodontics
• /
• v.22 no.2
• /
• pp.751-760
• /
• 1997

Resin-modified glass ionomers were introduced in 1988 to overcome the problems of moisture sensitivity and low early mechanical strengths of the conventional glass ionomers, and to maintain their dinical advantages. The purpose of this study was to evaluate the bi-axial fracture strength of four resinmodified glass-ionomers(Fuji II LC, Vitremer, Dyract, VariGlass), one resin composite material(Z-100), and one conventional glass-ionomer(Fuji II). Three specimens of each material and shade combination were made according to the manufacturers' instructions. Materials were condensed into metal mold with a diameter of 10mm and a thickness of 2.0mm and pressed between two glass plates. Resin-modified glass ionomers were polymerized using a Visilux II light curing unit by irradiating for 60 seconds from both sides, and conventional glass ionomer was cured chemically. After specimens were removed from the molds, surfaces were polished sequentially on wet sandpapers up to No. 600 silicone carbide paper. The specimens were thermocycled for 2,000 cycles between $5^{\circ}C$ and $55^{\circ}C$ distilled water. After thermocycling, bi-axial fracture strengths were measured using a compressive-tensile tester(Zwick 1456 Z020, Germany) with the cross head speed of 0.5mm/minute. The results were as follows: 1. Two factors of the kind and color of materials had a main effect on bi-axial fracture strength (p<0.01), and bi-axial fracture strength was influenced significantly by the kinds of materials (p<0.01). But there was no significant interaction between two variables of the kind and color of materials (p>0.05). 2. Comparing the mechanical properties of the materials, the elastic modulus of Z100 was higher than any other material, and there was no difference in the displacement at fracture among materials. The bi-axial fracture strength of Z100 was significantly higher than any other material, and that of resin-modified glass ionomers was significantly higher than that of conventional glass ionomer (p<0.05). 3. In the same material group, the color of material had little influence on the mechanical properties.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.5
• /
• pp.509-514
• /
• 1994

A processing method for fermented paste of favorable flavor and texture using pen shell by-product was investigated. The pen shell by-product was homogenized with the addition of water and hydrolyzed with $5\%$ of Protin P(105 PU/g) at $55^{\circ}C$ for 1 hour. Flavor of the hydrolysate could be improved by thermal treatment at $100^{\circ}C$ for 40 minutes with $10\%$ of invert sugar. $2\%$ of agar-agar and $6\%$ of starch added to hydrolysate emulsified by $8\%$ of polyglycerol condensed ricinoleate(PGDR) were significantly effective for the improvement of rheological properties such as hardness, springiness and chewiness of the fermented paste. $15\%$ of table salt was finally added to the product of fermented pen shell paste. The contents of moisture, protein, lipid, carbohydrate and salinity of the product were $62.7\%,\;3.2\%,\;4.4\%,\;10.6\%\;and\;15.6\%$, respectively. The major free amino acids were glutamic acid, arginine, aspartic acid, leucine, lysine, glycine and alanine. The product was stable for the storage of 60 days at $23{\pm}3^{\circ}C$ on bacterial growth.

• Journal of the East Asian Society of Dietary Life
• /
• v.9 no.4
• /
• pp.435-441
• /
• 1999

This study was designed to investigate the effects of roasting temperatures on the antinutritional factors and functional properties of sesame protein isolates. The protein contents a sesame protein isolates (SPI) prepared at roasting temperatures of 5$0^{\circ}C$, 10$0^{\circ}C$, 15$0^{\circ}C$ and 20$0^{\circ}C$ were 65.5%, 66.6%. 68.9% and 64.1%, respectively. Total phenolic compounds, condensed tannin and phytate contents of SPI was increased from 5$0^{\circ}C$ to 20$0^{\circ}C$. From color measurements, higher roasting temperature decreased 'L' and 'b' values significantly, but 'a' value was increased. The bulk density, fat absorption and water absorption of SPI was increased as the temperature of roasting was increased. Sesame protein isolates prepared by roasting at 5$0^{\circ}C$, 10$0^{\circ}C$ and 15$0^{\circ}C$ had higher emulsifying activity than those prepared by roasting at 20$0^{\circ}C$. Foaming capacity of SPI was not changed by roasting up to 10$0^{\circ}C$, but this property was reduced dramatically when roasted at 20$0^{\circ}C$.

• Restorative Dentistry and Endodontics
• /
• v.19 no.1
• /
• pp.1-26
• /
• 1994

The purpose of this study was to investigate the dissolution components during corrosion of amalgams and to identify surface corrosion products in the modified Fusayama artificial saliva. Four type of amalgam alloys were used: low copper lathe cut amalgam alloy (Cavex 68), low copper spherical amalgam alloy (Caulk Spherical Alloy), high copper admixed amalgam alloy (Dispersalloy) and high copper single composition amalgam alloy (Tytin). Each amalgam alloy and Hg were triturated according to the manufacturer's direction by means of mechanical amalgamator (Capmaster, S.S.White), and then the triturated mass was inserted into the cylindrical metal mold which was 10mm in diameter and 2.0mm in height and condensed with compression of 150kg/$cm^2$ using oil pressor. The specimens were removed from the mold and stored at room temperature for 7 days and cleansed with distiled water for 30 minutes in an ultrasonic cleaner. The specimens were immersed in the modified Fusayama artificial saliva for the periods of 1 month, 3 months and 6 months. The amounts of Hg, Cu, Sn and Zn dissolved from each amalgam specimen immersed in the artificial saliva for the periods of 1 month, 3 months and 6 months were measured using Inductivity Coupled Plasma Atomic Emission Spectrometry (ICPQ-1000, Shimadzu, Japan) and amount of Ag dissolved from amalgam specimen was measured using Atomic Absorption Spectrophotometry (Atomic Absorption/Flame emission spectrophotometer M-670, Shimadzu, Japan). A surface corrosion products of specimens were analysed using Electron Spectroscopy Chemical Analyser (ESCA PHI-558, PERKIN ELMER, U.S.A.). The secondary image and back scattered image of corroded surface of specimens was observed under the SEM, and the corroded surface of specimens was analysed with the EDX. The following results were obtained. 1. The dissolution amount of Cu was the most in high copper admixed amalgam(Dispersalloy) and the least in high copper single composition amalgam(Tytin). 2. Sn and Zn were dissolved during all the experiment periods, and dissolution amounts were decreased as the time elapsed. 3. Initial surface corrosion products were ZnO and SnO. 4. Corrosion of ${\gamma}$ and ${\gamma}_2$ phase in low copper amalgams was observed and Ag-Cu eutectic alloy phase was corroded in low copper spherical amalgam(Caulk Sperical Alloy). 5. Corrosion of ${\gamma}$ and $\eta$' phase in high copper amalgams was observed and Ag-Cu eutectic alloy phase was corroded in high copper admixed amalgam(Dispersalloy). 6. Sn-Cl was produced in the subsurface of low copper amalgams and high copper admixed amalgam.

• Journal of Life Science
• /
• v.26 no.7
• /
• pp.812-818
• /
• 2016

The aim of this study was to investigate the anti-amnesic effect of Stachys sieboldii MIQ. according to the mixing ratio of calcium on scopolamine-induced learning and memory impairment, in vivo. At the end of the adaptation period, SD rats were divided into a normal group (N), a control group (C: scopolamine), a positive control group (PC: scopolamine + tacrine), and a sample group (S: scopolamine + Stachys sieboldii MIQ., 1CS: scopolamine + low calcium-mixed Stachys sieboldii MIQ., 5CS: scopolamine + high calcium-mixed Stachys sieboldii MIQ.), and were tested with learning and memory tests. The C and CS groups were found to have a decreased scopolamine-induced memory deficit in the Y-maze and water maze tests. Brain tissue analysis showed that the CS group decreased acetylcholinesterase (AChE) activity and increased acetylcholine (Ach) content, both of which are indicative of neuronal cell activity. From a light microscopy study, the nucleus of neurons in the hippocampus of the brain was more shrunken or condensed in the C group compared to the CS group. In the CS group, the damage to the neurons in the hippocampus of the brain was suppressed. These results suggest that Stachys sieboldii MIQ. according to the mixing ratio of calcium provides a significant anti-amnesic effect against scopolamine-induced cholinergic system deficits and cognitive impairment.