• 국제학술발표논문집
• /
• The 2th International Conference on Construction Engineering and Project Management
• /
• pp.96-105
• /
• 2007

This paper presents a study on the impact of variation of construction material prices on the feasibility of building projects in Vietnam. The paper makes use of Monte-Carlo simulation for financial risk analysis of net present Value (NPV) and internal rate of return (IRR). To well illustrate the influencing, a case study is presented. The research results show that there is a strong correlation between steel prices, gold prices, and $US exchange rate. Outputs of statistics also reveal that the concurrent variation of prices of cement, steel, sand, brick, formwork and stone has strongly negative impact on NPV and IRR of building projects. The results also indicate that the proportion of steel cost to total construction cost is 17.95% which is the cause of risks for the feasibility of building project in Vietnam. The paper stresses that feasibility study of building project must integrate the impact of construction materials prices in order to mitigate risks in developing countries as Vietnam.

• Journal of Positioning, Navigation, and Timing
• /
• 제12권4호
• /
• pp.379-389
• /
• 2023

According to the Korea Urban Air Mobility (K-UAM) Concept of Operation (ConOps), the Global Navigation Satellite System (GNSS) is recommended as the primary navigation system and the performance specification will be implemented considering the standard of Performance Based Navigation (PBN). However, by taking into account the characteristics of an urban environment and the concurrent operations of multiple UAM aircraft, the current PBN standards for civil aviation seem difficult to be directly applied to an UAM aircraft. Therefore, by referring to technical documents published in the literature, this paper examines the feasibility of applying the proposed performance requirements to K-UAM, which follows the recommendation of navigation performance requirements for K-UAM. In accordance with the UAM ConOps, the UAM aircraft is anticipated to maintain low altitude during approach and landing phases. Subsequently, the navigation performance degradation could occur in the urban environment, and the primary degradation factor is identified as multipath error. For this reason, to ensure the safety and reliability of the K-UAM aircraft, it is necessary to analyze the degree of performance degradation related to the urban environment and then propose an alternative aid to enhance the navigation performance. To this end, the aim of this paper is to model the multipath effects of the GNSS in an urban environment and to carry out the simulation studies using the real GNSS datasets. Finally, the initial navigation performance requirement is proposed based on the results of the numerical simulation for the K-UAM.

• 한국화재소방학회논문지
• /
• 제26권2호
• /
• pp.90-96
• /
• 2012

외장재에 의한 수직화재확산은 확산속도가 구획화재에 비해 매우 빨라 이에 대한 화재의 특성 분석이 요구된다. 본 연구에서는 건물 외부에서 발생한 화재가 연소 확대되면서 수직으로 상승하여 개구부를 통해 유입되는 화재의 성상에 대해서 외장재로 널리 사용되는 심재가 폴리에틸렌인 일반 알루미늄복합패널에 대해 화재시뮬레이션을 적용하여 연구하였다. 그 결과, 수직확산화염은 화재초기에 2층까지 상승하는 데는 약 135초가 걸렸지만 10층까지는 470초, 최고층인 30층까지 상승하는 데는 711초에 도달하는 것으로 분석되어 고층부로 갈수록 난류 및 외장재 설치공간의 연돌효과에 의해서 급격히 확대되는 것을 알 수 있었다. 이러한 연구 결과로 외장재가 설치된 건축물의 화재 시 개구부를 통한 화재는 동시다발적으로 그 건물의 내부에 확대되는 심각성을 확인할 수 있었다.

• 한국통신학회논문지
• /
• 제37C권11호
• /
• pp.1084-1093
• /
• 2012

멀티홉 네트워크에서 TPSN, RBS, FTSP와 같은 기존의 시간 동기화(TS : Tims Synchronization) 방법들은 네트워크의 홉수가 증가 할 경우 TS 오류 또한 증가하게 된다는 단점을 가지고 있다. 이는 멀티홉 네트워크를 통해 구현되는 passive multistatic 레이더 시스템 및 무선 센서 네트워크 노드들 간의 시간 동기화 오류를 증가시켜 시스템 정확도를 저하시키는 중요한 원인이 된다. 따라서 이 논문에서는 동시 협동 전송(CCT : Concurrent Cooperative Transmission)과 반협동 스펙트럼 융합 전송(SCSF : Semi-Cooperative Spectrum Fusion)의 두 종류의 CT (Cooperative Transmission)을 이용한 시간 동기화 방법을 제안하고자 한다. CT를 이용하면 시간 정보가 전달되는 데에 필요한 홉수를 줄여 결과적으로 TS 오류를 줄일 수 있다는 장점을 가지게 된다. CCT는 협동하고 있는 노드들이 디지털하게 인코딩된 동일한 메시지를 각각의 직교한(orthogonal) 채널을 통해서 동시에 전송하면, 수신노드는 이를 수신하여 통합하여 디코딩함으로써 diversity gain을 얻는 전송방식이다. 반면 SCSF는 각각의 노드들이 상관성 있는 아날로그 데이터를 스펙트럼에 실어 동시에 전송하는 방식이다. 이 논문에서는 이 두 가지의 전송방식을 융합한 아날로그 및 디지털 협동 전송 시간 동기화 프로토콜, 즉 CANDI 프로토콜을 제안하고, 이 프로토콜이 멀티홉 네트워크에서 기존의 시간 동기화 방식인 TPSN과 비교하여 상당히 큰 격차로 시간 오류를 줄이는 것을 시뮬레이션을 통해서 증명하고자 한다.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1992년도 춘계공동학술대회 발표논문 및 초록집; 울산대학교, 울산; 01월 02일 May 1992
• /
• pp.249-257
• /
• 1992

An automated machining system involves concurrent use of manufacturing resources, alternative process plans, and flexible routings. High investment in the installation of automated facilities requires an efficient scheduling system that is able to allocate the resources specified for operations over a scheduling horizon. The primary emphasis of this paper is to generate schedules that accurately reflect details of the automated environment and the objectives stated for the system. In this paper, a scheduling algorithm for automated machining is presented. Using the previous simulation research for this topic, a rule-based scheduling system is constructed. An architecture for an intelligent scheduling system is proposed, and the system has a high potential to provide efficient schedules based on the task-specific knowledge for the dynamic scheduling environment

• Journal of information and communication convergence engineering
• /
• 제13권3호
• /
• pp.189-196
• /
• 2015

In this paper, we present a rotating auto-zeroing offset cancellation technique, which can improve the performance of touch screen sensing circuits. Our target touch screen detection method employs multiple continuous sine waves to achieve a high speed for large touch screens. While conventional auto-zeroing schemes cannot handle such continuous signals properly, the proposed scheme does not suffer from switching noise and provides effective offset cancellation for continuous signals. Experimental results show that the proposed technique improves the signal-to-noise ratio by 14 dB compared to a conventional offset cancellation scheme. For the realistic simulation results, we used Cadence SPECTRE with an accurate TSP model and noise source. We also applied an asymmetric device size (10% MOS size mismatch) to the OP Amp design in order to measure the effectiveness of offset cancellation. We implemented the proposed circuit as part of a touch screen controller system-on-chip by using a Magnachip/SK Hynix 0.18-µm complementary metal-oxide semiconductor (CMOS) process.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 추계학술대회
• /
• pp.17-20
• /
• 2012

RFID 시스템에서는 다수의 태그가 하나의 슬롯에 동시에 전송을 할 때 충돌이 발생된다. 충돌을 줄이고 시스템의 효율을 최대로 하기 위해서는 태그 수와 같은 슬롯 수를 할당해야 한다. 매 프레임마다 할당되는 슬롯 수는 슬롯에 경쟁하는 태그들에 수에 의해 결정되어진다. 본 논문에서는 DFSA를 기반으로 태그 수를 추정할 때 초기에 설정하는 태그 수가 시스템 성능에 미치는 영향에 대해 시뮬레이션을 통해 결과를 제시하고 분석하고자 한다.

• 산업공학
• /
• 제16권1호
• /
• pp.63-69
• /
• 2003

Virtual Manufacturing is a technology facilitating effective development and agile production of products via computer models representing physical and logical schema and the behavior of the real manufacturing systems including manufacturing resources, environments and products. For the successful application of this technology, a virtual factory as a well-designed and integrated environment is essential. To construct a virtual factory in effective and concurrent manners, a supporting information infrastructure for managing diverse models of virtual factory is very important. In this paper, we constructed the web-based information management system for many engineering activities related with a virtual factory. Using this system, users can handle all information and diverse digital files including attributes, parameters, 3-D CAD files, simulation models, and etc. of a cell, line and whole factory. We expect that this information management system for a virtual factory helps us achieve great time savings and advances in accuracy for construction and maintenance activities of virtual factories.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.3089-3091
• /
• 1999

To control IWR-III Biped Waking Robot, those complex modules are necessary that concurrent control multi-axes servo motors, PID & Feedforward gain tuning, initial value calibration, display current status of system, user interface for emergency safety and three-dimensional rendering graphic visualization. It is developed for various-type gait $data^{[1]}$ and for control modes (i.e open/closed loop and pulse/velocity/torque control) that Integrated Control Enviroment with GUI( Graphic User Interface) consist of time-buffered control part using MMC (Multi-Motion Controller) and 3D simulation part using DirectX graphic library.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2007년도 춘계학술발표대회
• /
• pp.1291-1293
• /
• 2007

Due to dense deployment and innumerable amount of traffic flow in wireless sensor networks (WSNs), congestion becomes more common phenomenon from simple periodic traffic to unpredictable bursts of messages triggered by external events. Even for simple network topology and periodic traffic, congestion is a likely event due to dynamically time varying wireless channel condition and contention caused due to interference by concurrent transmissions. In this paper, we have proposed three mechanisms: upstream source count and buffer based rate control and snoop based MAC level ACK scheme to avoid congestion. The simulation results show that our proposed mechanism achieves around 80% delivery ratio even under bursty traffic condition