• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 추계 학술논문 발표대회
• /
• pp.1-5
• /
• 2005

There are a lot of problem about waterproofing membrane coating for concrete deck of bridge and waterproofing sheets for concrete of deck of bridge because it couldn't confirm waterproofing's defeat after construction. These problems make a waterproofing material damage and concrete deck of bridge damage. So It needs a lot of money for repair work and reinforcement work. Therefor the structure slab of using waterproofing material protect invasion of water. Also, Concrete deck of bridge need a endurance permeability for the reduction repair payment. In this study, An experimental study on the quality standardization test method waterproofing layer on working of live load

• Structural Engineering and Mechanics
• /
• 제70권2호
• /
• pp.133-141
• /
• 2019

The aim of the present paper is to present the cyclic behavior of strengthened reinforced concrete shear wall test specimen, which was reinforced with cold drawn welded wire mesh fabric. Two reinforced concrete shear wall specimens have been tested in the present study. The walls were tested under reversed cyclic loading with loading applied near the tip of the walls. The control wall is tested in its original state to serve as a baseline for the evaluation of the repair and strengthening techniques. The two test specimens include a control wall and a repaired wall. The control wall test specimen was designed and detailed to simulate non-ductile reinforced concrete shear walls that do not meet the modern seismic provisions. The response of the original wall was associated with the brittle failure. The control shear wall was repaired by addition of the reinforcements and the concrete and then it was reloaded. The effectiveness of the repair technique was investigated. Test results indicate that there can be a near full restoration of the walls' strength. The data from this test, augmenting other data available in the literature, will be useful in calibrating improved analytical methods as they are developed.

• International Journal of Concrete Structures and Materials
• /
• 제9권3호
• /
• pp.345-367
• /
• 2015

Past earthquakes have signaled the increased collapse vulnerability of mainshock-damaged bridge piers and urgent need of repair interventions prior to subsequent cascading hazard events, such as aftershocks, triggered by the mainshock (MS). The overarching goal of this study is to quantify the collapse vulnerability of mainshock-damaged substandard RC bridge piers rehabilitated with different repair jackets (FRP, conventional thick steel and hybrid jacket) under aftershock (AS) attacks of various intensities. The efficacy of repair jackets on post-MS resilience of repaired bridges is quantified for a prototype two-span single-column bridge bent with lap-splice deficiency at column-footing interface. Extensive number of incremental dynamic time history analyses on numerical finite element bridge models with deteriorating properties under back-to-back MS-AS sequences were utilized to evaluate the efficacy of different repair jackets on the post-repair behavior of RC bridges subjected to AS attacks. Results indicate the dramatic impact of repair jacket application on post-MS resilience of damaged bridge piers-up to 45.5 % increase of structural collapse capacity-subjected to aftershocks of multiple intensities. Besides, the efficacy of repair jackets is found to be proportionate to the intensity of AS attacks. Moreover, the steel jacket exhibited to be the most vulnerable repair intervention compared to CFRP, irrespective of the seismic sequence (severe MS-severe or moderate AS) or earthquake type (near-fault or far-fault).

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.541-546
• /
• 2000

Recently, there have been increased mush concerns about repair and rehabilitation works for aged concrete structures to keep up with rapid economic growth in Korea since the early 1970's. In particular, it is believed in these days that there are significantly increasing number of aged concrete bridge slabs, which are strongly needed to construct and rehabilitate by innovative construction method. The objective of this research is to develop the new construction method of concrete slab in bridge structure, which can contribute to minimize the traffic congestion during the repair and rehabilitation works of aged concrete slab, and can also sufficiently assure the quality through the minimization of in-situ works at the site. I-beams with punch holes, which are substituted instead of main reinforcing steels in concrete slabs, will be manufactured in accordance with the specification in the factory, and will be preassembled into the panel. After erecting the preassembled panels in the site, concrete will be poured into the slab panel. This test is to investigate physical properties of I-Beam with punch holes itself, and then to investigate structural properties of assembled I-Beam panels through static and fatigue test, of which can be utilized for the development of new construction method of concrete slab in bridge structure.

• 대한건축학회논문집:구조계
• /
• 제34권9호
• /
• pp.19-26
• /
• 2018

The focus of this study was centered around 15 common injection type water leakage repair materials (3 different types for each; synthetic polymer, cementitious, acrylic, epoxy, urethane) used in concrete structures of Korea and analyzing their wet surface adhesion performance in accordance to the ISO TS 16774 Test Method for Repair Materials for Water-leakage Cracks in Underground Concrete Structures, Part 4: Test Method for Adhesion on Wet Concrete Surface, and the results of this study was taken to be place under a comparative analysis with the results of the preceeding study on response to substrate movement performance study. The results of this comparative study showed that other than 1 specimen of 1 type of the acrylic and 3 specimens of 1 type of the synthetic polymer type materials, all of the 93% of the specimens used in this study showed stable adhesion on wet substrate surface, and we were able to determine that materials that have proper response properties against substrate movement are highly flexible and have high adhesion properties, but their adhesion properties on wet substrate would change based on their viscosity.

• 콘크리트학회논문집
• /
• 제16권1호
• /
• pp.88-93
• /
• 2004

철근콘크리트 구조 부재에 발생되는 균열은 구조체의 미관, 내구성 및 구조적 측면에서 보수를 요하게 되며, 에폭시 주입 균열보수공법은 최근 국내에서 가장 널리 사용되는 균열 보수공법 중의 하나이다. 에폭시 주입공법의 성능은 사용되는 에폭시의 물성과 균열의 폭에 기인하게 된다. 본 연구에서는 균열을 발생시키는 하중의 크기를 변수로 하고, 재하 중 보수한 경우와 하중을 제거한 후 보수한 경우를 비교 분석하도록 하였다. 총 5개의 실험체에 대하여 공칭 휨강도의 $70\%$ 및 $90\%$의 하중을 가력하여 균열을 발생시킨 후 에폭시 주입공법으로 보수하고, 보수 이후 부재의 거동을 실험적으로 연구하였다. 실험결과, 에폭시 주입공법에 의한 균열의 보수는 양호한 구조성능의 회복을 나타내었으며, 극심한 하중 하에서 보수된 실험체는 에폭시의 강도특성으로 인하여 오히려 강도 및 강성이 증가되는 현상을 나타내었다.

• 한국건축시공학회지
• /
• 제10권6호
• /
• pp.97-107
• /
• 2010

누수균열은 상시 콘크리트 구조체의 거동, 물의 성분, 수압, 온도, 화학 물질 등 다양한 환경 요인의 영향이 작용함에 따라 이에 대응할 수 있는 성능을 확보한 보수재료 및 공법이 사용되어야 한다. 본 연구에서는 콘크리트 구조물은 국가적으로 유사한 공학적 특성(배합설계, 사용재료, 시공방법, 유지관리 등)을 가지고 있기 때문에, 누수균열에 대한 보수 접근도 크게 다르지 않을 것으로 보고, 향후 유지관리 전문가들의 공통적 기술 지침의 필요에 따라 자료를 개발하였다.

• 산업기술연구
• /
• 제24권A호
• /
• pp.179-184
• /
• 2004

Each year, new technological advancements for repair-purpose are being introduced to overlay the old deterioration of RC bridge deck at highway by latex-modified concrete. The days may come when this old problem will be successfully resolved. While the experimental works and researches are very active at both laboratory and field, only a few theoretical studies were performed on interfacial problems, especially on stress distribution and concentration of RC beam overlayed by latex-modified concrete. The repaired and strengthened structures would induce a premature failure due to the stress concentration at the adhesive layer of different material before the design expected failure. This paper investigated and proposed an analytical model for predicting interfacial shear and normal stresses of RC beam repair-purpose overlayed by latex-modified concrete. This would be used for predicting interfacial stresses and preventing premature failure at interfaces. This study modified Smith-Teng method for applying to cementitious repairing material, which was based on a direct governing equation and linear-elastic approach for interfacial normal and shear stresses. The proposed theoretical model was verified using commercial FEA program, LUSAS, in terms of interfacial stresses predicted by the proposed model and calculated by LUSAS.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.200-201
• /
• 2021

According to the dispute cases filed for claiming the collective defect repair fees, inter-layer concrete joints turned out to be the most frequently disputed item. For this reason, this study selects the inter-layer concrete joints to further analyze the primary causes and details of each dispute case. From the results of this study, three primary causes of the disputes are found, which are 1) the absence of standard specifications for construction quality control and management after construction; 2) the absence of established standards for repair when construction defects are found. In order to prevent construction defects in inter-layer concrete joints, this study provides three suggestions including 1) the current standard specifications for inter-layer concrete joints should be further specified by the Ministry of Land, Infrastructure and Transport; 2) a construction defect should be judged according to the compliance to the standard specifications; and 3) a clear and institutional protocol needs to be established for defect repair in cases that new public apartment houses have been judged to have defects.

• 콘크리트학회논문집
• /
• 제18권2호
• /
• pp.219-226
• /
• 2006

본 연구에서는 복합 재질 폐플라스틱을 재활용한 폴리머콘크리트의 압축, 휨 및 충격강도, 흡수율 및 동결융해저항성에 미치는 결합재 첨가량 및 PA 혼입량의 영향에 대하여 연구하였다. 그 결과 복합 재질 폐플라스틱을 재활용한 폴리머콘크리트의 압축, 휨 및 충격강도는 PA 혼입량에 관계없이, 결합재 첨가량 및 충전제 혼입량의 증가에 따라 증가하는 경향을 나타냈다. 하지만, PA 혼입량의 증가에 따라서는 감소하는 경향을 보였다. 복합 재질 폐플라스틱을 재활용한 폴리머콘크리트의 흡수율은 PA 혼입량에 관계없이, 결합재 첨가량의 증가에 따라 감소하는 경향을 나타냈다. 하지만 PA 혼입량의 증가에 따라서는 증가하는 경향을 나타냈다. 복합 재질 폐플라스틱을 재활용한 폴리머콘크리트의 내구성 지수는 결합재 첨가량의 증가에 따라 증가하였으나, PA 혼입량에 따라서는 감소하는 경향을 보였다.