• 한국구조물진단유지관리공학회 논문집
• /
• 제27권6호
• /
• pp.193-200
• /
• 2023

본 논문에서는 전자기장 노출을 통한 강섬유의 방향 정렬 방법이 휨파괴거동에 미치는 영향을 비교, 분석하였다. 강섬유의 방향을 휨공시체의 종방향으로 정렬할 수 있는 규모의 솔레노이드를 설계, 제작하였다. 설계강도 30MPa의 강섬유보강콘크리트 휨공시체를 제작하였으며, 이를 전자기장에 노출한 공시체와 노출하지 않은 공시체로 구분하여 휨파괴 실험을 수행하였다. 실험변수는 강섬유의 혼입률과 형상비로 하였다. 실험결과, 전자기장에 노출된 시험체의 휨강도, 최대하중에서의 개구변위가 미소하게 증가하였으며, 특히 파괴에너지의 증가가 명확하게 확인되었다. 잔존강도의 증가가 파괴에너지 증가에 가장 큰 영향을 준 것으로 확인되었다.

• 한국건축시공학회지
• /
• 제23권6호
• /
• pp.673-682
• /
• 2023

본 연구에서는 모르타르 조건하에서 초지연제 혼입률, 양생온도 및 강도수준 변화에 따른 응결지연 특성을 고찰하고자 하였으며, 세티메타를 이용하여 공사현장의 다양한 외기조건 및 재료배합 조건하에서 초지연제를 사용한 콘크리트의 응결시간을 효율적으로 추정할 수 있는 객관적 방법을 제시하고자 하였다. 그 결과, 비선형 회귀모델의 추정식 및 세티메타을 이용하여 초지연 모르타르의 응결시간을 추정할 수 있을 것으로 사료되며, 초결은 45 ST, 종결은 80 ST 전후로 관리하는 것이 바람직할 것으로 판단된다. 또한, 이를 통해 초지연 콘크리트의 응결시관과 관련한 효율적인 품질관리가 가능할 것으로 사료된다.

• 한국농공학회지
• /
• 제22권1호
• /
• pp.53-66
• /
• 1980

The research work is concerned with the analytical and experimental studies on the heat transfer phenomenon around the underground concrete digester used for biogas production Systems. A mathematical and computational method was developed to estimate heat losses from underground cylindrical concrete digester used for biogas production systems. To test its feasibility and to evaluate thermal parameters of materials related, the method was applied to six physical model digesters. The cylindrical concrete digester was taken as a physical model, to which the model,atical model of heat balance can be applied. The mathematical model was transformed by means of finite element method and used to analyze temperature distribution with respect to several boundary conditions and design parameters. The design parameters of experimental digesters were selected as; three different sizes 40cm by 80cm, 80cm by 160cm and l00cm by 200cm in diameter and height; two different levels of insulation materials-plain concrete and vermiculite mixing in concrete; and two different types of installation-underground and half-exposed. In order to carry out a particular aim of this study, the liquid within the digester was substituted by water, and its temperature was controlled in five levels-35。 C, 30。 C, 25。 C, 20。C and 15。C; and the ambient air temperature and ground temperature were checked out of the system under natural winter climate conditions. The following results were drawn from the study. 1.The analytical method, by which the estimated values of temperature distribution around a cylindrical digester were obtained, was able to be generally accepted from the comparison of the estimated values with the measured. However, the difference between the estimated and measured temperature had a trend to be considerably increased when the ambient temperature was relatively low. This was mainly related variations of input parameters including the thermal conductivity of soil, applied to the numerical analysis. Consequently, the improvement of these input data for the simulated operation of the numerical analysis is expected as an approach to obtain better refined estimation. 2.The difference between estimated and measured heat losses was shown to have the similar trend to that of temperature distribution discussed above. 3.It was found that a map of isothermal lines drawn from the estimated temperature distribution was very useful for a general observation of the direction and rate of heat transfer within the boundary. From this analysis, it was interpreted that most of heat losses is passed through the triangular section bounded within 45 degrees toward the wall at the bottom edge of the digesten Therefore, any effective insulation should be considered within this region. 4.It was verified by experiment that heat loss per unit volume of liquid was reduced as the size of the digester became larger For instance, at the liquid temperature of 35˚ C, the heat loss per unit volume from the 0. 1m$^3$ digester was 1, 050 Kcal/hr m$^3$, while at for 1. 57m$^3$ digester was 150 Kcal/hr m$^3$. 5.In the light of insulation, the vermiculite concrete was consistently shown to be superior to the plain concrete. At the liquid temperature ranging from 15。 C to 350 C, the reduction of heat loss was ranged from 5% to 25% for the half-exposed digester, while from 10% to 28% for the fully underground digester. 6.In the comparison of heat loss between the half-exposed and underground digesters, the heat loss from the former was fr6m 1,6 to 2, 6 times as much as that from the latter. This leads to the evidence that the underground digester takes advantage of heat conservation during winter.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2004년도 학술.기술논문발표회
• /
• pp.71-74
• /
• 2004

Recently, with the wide shortage of natural sand resources, it has been increasingly used the crushed sand. rushed sand is made by the process of crushing the rocks artificially, which has different particle properties compared with that of natural sand. Because such different panicle properties of crushed sand results in an undesirable effects of concrete. improvement technology for crushed sand particle properties like grain shape and fine particle needed during the manufacturing process. In this paper, improvement technology of grain shape and fine particle is reported. According to test results, adequate investment for manufacturing facilities like impact crusher and abrasion test machine is required to meet the advanced grain shape and grading of crushed sand. Based on the investigation of test result, mixing of natural land and crushed sand with given proportion can achieve the improvement of grain shape. For improving excessive fine panicle contents. current manufacturing system also can enhance the existing technology for fine particle without additional investment. It can be concluded that adequate investment and research can improve the quality of crushed sand.

• 산업기술연구
• /
• 제21권B호
• /
• pp.249-256
• /
• 2001

The purpose of this study was to remove the excessive air foaming which was produced in mixing the RSLMC(latex-modified concrete with rapid-setting cement) by choosing the best antifoam agent type. A series of RSLMM(latex-modified mortar with rapid-setting cement) experiments were carried out as a basic experiments for RSLMC with the main experimental variables such as antifiamer types(A, B, C, D), antifoamer contents(0, 1, 2, 3%), and latex contents(10, 15%). Air content test and compressive strength tests were carried out to measure the improved properties of RSLMM. SEM analysis, also, was carried to observe the formation of latex film. The results of RSLMM showed that the decrease of 50% air content was obtained by admixturing an antifoam agent by 1%. This made the strength enhanced and the workability be within the purposed. The best properties of compressive strengths was obtained at latex content of 15% and D antifoam agent of 1%. compressive strength increased about 32.6%. The analysis of SEM results no difference in a formation of later film.

• 한국응용과학기술학회지
• /
• 제33권2호
• /
• pp.232-238
• /
• 2016

본 연구에서는 액-액 반응에 의한 액상탄산화법을 이용하여 탄산칼슘을 제조하였다. MEA를 사용하여 습식화학수법의 셔틀메카니즘을 도입하였다. MEA 30% 수용액에 고농도 이산화탄소(A)와 배기가스(B)를 사용하여 이산화탄소를 포집하였으며, 액상탄산화과정을 통해 슬러지 mg 당 0.35 mg의 이산화탄소를 고정하였다. 최종생성물의 SEM 분석결과 탄산칼슘의 구조는 calcite가 혼합되어 있으나 대부분 구형 vaterite가 생성되었다.

• The Korean Journal of Ceramics
• /
• 제1권1호
• /
• pp.13-20
• /
• 1995

Effects of thermal annealing on the dielectric/piezoelectric properties of $Pb(Zn, Mg)_{1/3}Nb_{2/3}O_3-PbTiO_3$ ceramics (PZMNPT) with Zn/Mg=6/4) were examined across the rhombohedral/tetragonal morphotropic phase boundary (MPB). Both the relative dielectric permittivity ($\varepsilon$r)and the piezoelectric constant($d_33$)/electromechanical coupling constant ($k_p$)were increased by thermal annealing ($800^{\circ}$~$900^{\circ}C$) after sintering at $1150^{\circ}C$ for 1 hr. Based on the dielectric analysis using the series mixing model and the concept of a random distribution of the local Curie points, the observed improvements in the dielectric and piezoelectric properties of PZMN-PT were interpreted in terms of the elimination of PbO-rich amorphous intergranular layers(~1nm) induced by thermal annealing. A concrete evidence of the presence of amorphous grain-boundary layers in the unannealed (as-sintered) specimen was obtained by examining the structure of intergranular region using a TEM.

• 한국안전학회지
• /
• 제20권2호
• /
• pp.105-112
• /
• 2005

This is to find out that cement mortar mixed with waste tie particle can be applied for recycling it and enhanced to have shock absorption capacity. Therefore, architectural material specification and its related references for the disposal of it are based on for the study. Test has been performed with procedure, based on the Korea Standard insulation mortar and Compressive Strength Test has been done at K remicon factory approved by Korea Government in Korea, in order to decrease any possible error in mixing procedure. Test molds far insulation capacity and cohesive strength have been delivered to the expert agency for having more exact results. The result from the above test shows that waste tyre mixed with cement mortar has almost equal to the common concrete. This means that the recycling of the waste t)re will be demanded more and more in case of having continued development for this recycling area. And also waste t)to-using construction material can be more applied for construction area than existing material. Thus, this recycling method can be very usefully applied for solving environmental problem and for establishing economic aspect.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.293-301
• /
• 2005

The CSG(Cemented Sand and Gravel) method is construction technique using as raw materials earth and gravel generated from a local construction site, mixing them with cement and rolling with vibration rollers. Recently, The use of this method for cofferdam and large dam is gradually increasing in Japan. The purpose of an CSG mix design is to develop project specific properties to meet the structure design requirements. But uniform mix design of CSG method has not yet been established. The experience of practitioners from the geotechnical and concrete disciplines has given rise to two genernal approaches to mix design for CSG. This paper reports the concept of how to set the mix design according to modified Proctor compaction test process and the test results on properties such as compaction, compressive strength and modulus of elasticity that obtained by unconfined compression test.

• 한국세라믹학회지
• /
• 제52권1호
• /
• pp.13-18
• /
• 2015

The fabrication method used for mineral hydrate is similar to that of ALC (autoclaved lightweight concrete), but the fabrication of normal slurry with a considerable amount of a foaming agent is difficult due to material separation and collapse of the slurry. Therefore, the development of fabrication methods for normal slurry is necessary. The final product, mineral hydrate insulation, has excellent thermal properties but poor strength characteristic given the many pores. In this study, in order to fabricate normal slurry, the viscosity and foaming time of the slurry were controlled. The mixing ratio of the starting material and the polypropylene fiber was controlled to improve the strength. Mineral hydrate with polypropylene fiber showed a higher strength than that without this type of fiber. Specifically, the compressive strength of mineral hydrate with 2% polypropylene fiber added to it was more than 40% higher than that without the fiber.