• 콘크리트학회논문집
• /
• 제21권6호
• /
• pp.745-752
• /
• 2009

이 논문에서는 과산화수소를 사용한 경량기포콘크리트의 최적배합비를 제안하고 있다. 최적배합을 도출하기 위해 상용프로그램인 MINITAB을 사용하여 실험계획법을 적용하였다. 통계적 분석방법은 반응표면분석법 중 하나인 Box Behnken(B-B)계획법으로 하였다. 실험시 고려한 영향인자로는 단위시멘트량, 물시멘트비, 과산화수소비를 설정하였다. 분산분석에 따르면 경화상태에서 경량기포콘크리트의 물시멘트비와 과산화수소비는 절건밀도, 압축강도, 휨강도에 유의차가 있고, 단위시멘트량은 절건밀도에만 유의차가 있는 것으로 나타났다. 반응표면분석의 결과에서 과산화수소를 사용한 경량기포콘크리트의 최적배합비는 단위시멘트량 800 kg/$m^3$, 물시멘트비 44.33%, 과산화수소비 10%로 도출되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.139-142
• /
• 1999

The purpose of this experimental research is to investigate the mechanical properties of ordinary strength and high strength concrete containing waste glass powder. For this purpose, after production of concrete containing waste glass powder for different unit weight of binder and placement ratio of waste glass powder, optimum mixing proportions of them was determined, and then mechanical properties such as static modulus of elasticity as well as compressive, tensile and flexural strength were tested and analyzed for concrete produced according to optimum mixing proportions. As a result, the concrete containing waste glass powder has as excellent workability and strength, it's strengths are analogus to those of silica fume, it's workability is somewhat better than that of silica fume.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.253-256
• /
• 2000

The functions of porous concrete were influenced by continuous void, and it differ greatly from the distribution and size shape of continuous void in the same void volume. And porous concrete has been few used because the strength level of porous concrete is lower than that of ordinary concrete at the present time. So the purpose of this study is to increase the strength of porous concrete at the range of satisfying its function, analyze those effects of the mixing ratio of aggregate, affecting the development of its strength.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 가을 학술발표회 논문집
• /
• pp.17-23
• /
• 1996

The objective of this study is to present the reference data about the influence of concrete properties using crushed sand, according to the change of powder content and grain shape. From the test results. We obtained that as powder content is increased, sand aggregate ratio, water content and S.P/C are increased in mixing design of concrete. The more powder content is the less slump and air content loss are decreased in fresh state, but the higher compressive strength and drying shrinkage are increased in hardened concrete state. As grain shape become round, water content is decreased in mixing design of concrete. And also, loss of slump and air content in fresh state, compressive strength in hardened state are increased.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.73-76
• /
• 2005

This study aims to suggest a simple and convenient design for a mix proportion method for high performance concrete by determining the optimum fine aggregate ratio and minimum binder content based on the maximum density theory. The mix design method introduced in this study adopted the optimum fine aggregate ratio with a minimum void and binder content higher than the minimum binder content level. The research results reveal that the method helps to reduce trial and error in the mixing process and is a convenient way of producing high performance concrete with self filler ability. In an experiment based on the mix proportion method, when aggregate with the fine aggregation ratio of 41$\%$ was used, the minimum binder content of high performance concrete was 470kg/$m^{3}$ and maximum aggregate capacity was $0.657m^{3}/m^{3}$. In addition, in mixing high performance concrete, the optimal slump flow to meet filler ability was 65$\pm$5cm, V load flow speed ranged from 0.5 to 1.5.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.345-348
• /
• 2004

In this study, an effect of fiber blending on material property of hybrid fiber reinforced concrete (HFRC) was evaluated. Also, optimized association and the mixing rate of fiber for HFRC was determined. Test result shows, in the case of mono fiber reinforced concrete, use of steel fiber in concrete caused increment in tensile and bending strength as the blended ratio increases, while use of carbon fiber and glass fiber caused increment in compressive strength. Use of hybrid fiber reinforcement in concrete caused a significant influence on its fracture behavior; consequently, caused increase by mixing rate of steel fiber and contributed by carbon fiber, glass fiber, celluloid fiber in reinforcement effect in order.

• 한국산학기술학회논문지
• /
• 제3권1호
• /
• pp.20-26
• /
• 2002

콘크리트의 품질관리에 활용하기 위하여 콘크리트의 시멘트-물비와 압축강도의 상관식을 시험을 통하여 구하였다. 그리고 콘크리트의 공기량, 슬림프 및 강도 시험결과를 데이터 베이스화 하고 X-R 관리도와 X-Rs 관리도를 작성하는 기능 그리고 사용재료에 대한 각종 시험결과를 정리할 수 있는 데이터 시트 기능을 가진 품질관리 프로그램을 개발하였다. 또한 이 프로그램 속에는 콘크리트 시험 비비기를 할 때의 배합계산 및 콘크리트 관련 용어사전 기능을 포함시켰다.

• 한국재료학회지
• /
• 제32권4호
• /
• pp.223-229
• /
• 2022

A porous photocatalyst concrete filter was successfully produced to remove NOx, by mixing TiO₂ photocatalyst with lightweight aerated concrete. Ultra Fine Bubbles were used to form continuous pores inside the porous photocatalytic concrete filter, which was mixed via a bubble generation experiment. The optimal mixing condition was determined to be with 4 % of the bubble generation agent B. NO removal specimens were prepared for various photocatalytic loading conditions, and the specimen containing 3 % P-25 removed NO at a concentration of 1.03 µmol in 1 h. The NO removal rate of the porous photocatalytic concrete filter prepared in this study was 10.99 %. This photocatalytic filter performance was more than 9 times the amount of NO removed by a general photocatalytic filter. The porous photocatalyst concrete filter for removing NOx developed in this study can be applied to various construction sites and the air quality can be solved by reducing NOx contributing to the formation of fine particles.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.109-110
• /
• 2015

In this study, fresh state properties and mechanical properties of low slump concrete which is applied to road pavement have been evaluated by mixing modified sulfur. As results, influence of mixing modified sulfur on the workability was low. Also, compressive strength, and flexural strength tend to decrese with increasing addition rate of modified sulfur. However compressive strength, and flexural strength of modified sulfur concrete were equivalent with that of plain concrete.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 추계 학술논문 발표대회
• /
• pp.38-39
• /
• 2015

For the purpose of reducing defects (cracking) in topping concretes cast as artificial greening layer base, synthetic macro fibers were mixed. The flexural strength of synthetic macro fiber mixed topping concretes was tested via comparing its performance with current topping concrete. According to the results of the testing, topping concrete with adjusted mixing ratio after mixing with 1kg of synthetic macro fiber showed approximately 15% higher flexural strength compared to the current topping concrete.