• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 춘계 학술논문 발표대회
• /
• pp.87-91
• /
• 2008

The study examined fire resistance of concrete followed by change of mixed rate in PP and NY composite fiber and the results were as follows. In the event of fluidity in concrete not set, plane satisfied 600±100, its target slump flow, and fluidity was reduced as organic fiber's mixed rate was increased. Air amount satisfied 3.0±1.0, its target air amount, and didn't have distinct differences in reduction and increase according to organic fiber's kind and change of its mixed rate. However, it had a tendency that fluidity was reduced as the mixed rate was increased. In characteristics of hardening concrete, the 28th day compressive strength followed by organic fiber's kind and change of its mixed rate didn't have a lot of differences and satisfied high strength scope as about 70MPa. In spalling characteristics after fire resistance test, spalling was happened in non-mixture, plane combination, and P1N0. In other combinations, spalling resistance was happened. The relic compressive strength rate was 56%, the best condition, in P3N1(PP0.03%, NY0.01% compositeness) mixing PP fiber with NY fiber at once.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 추계 학술논문 발표대회
• /
• pp.5-9
• /
• 2007

The construction method for Foamed-Concrete has not been important due to following process of construction work. However, according to the code about enhance of energy saving design policy and impact noise, noised isolation has been used in construction site so that the resistance for cracking and capability for insulating of Foamed-Concrete has been required. Therefore, new alternatives are demanded. Optimum mixing design, which can get the improvement of insulation and resistance of crack for Foamed-Concrete adding EVA chip, was derived and also the device, applying to construction site, was invented to equalize quality. This device can measure quantity of all input and placement, and show up the sum of placement and mixing design on a touch screen. This valuable construction method is friendly environment and recycling method because of using EVA chip, by-product of an EVA insole scrap burned or embedded, as a light-weight aggregate.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 추계 학술논문 발표대회
• /
• pp.133-136
• /
• 2009

This study analyzes the mixing and basic characteristics of concrete according to the unit quantity and mixing method of ternary blended cement and the results of this study can be summarized as follows. In the case of the premixed cement (hereafter referred as POBF) of POBF135, it satisfies the target level of fluidity and air content in which it shows relatively small bleedings even though it represents the latest initial and final setting. Also, although the POBF135 represents small initial strength, it shows an increase in the strength according to the increase in aging. In addition, it shows the lowest temperature in the POBF135. As a result, it can be seen that the POBF135 indicates the most optimal mixing subject to considering the aspect of fluidity, compressive strength, and heat of hydration in general figures.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 춘계 학술논문 발표대회 학계
• /
• pp.61-64
• /
• 2009

This study is reviewed fire resistance characteristics of high strength concrete according to changes in PP fiber mixing ratio and type of fine aggregate, and the results can be summarized as follows. As fire resistance characteristics, all plain crushed sands prevented spalling regardless of increase in mixing ratio of PP fiber. Mixtures other than the plain showed satisfactory spalling prevention when 0.05 % or more of PP fiber was mixed. After the fire resistance experiment, the plain showed 5.5 % of mass loss rate when fiber was not mixed and others could not be measured. According to increase in mixing ratio of fiber, river sand with fineness modulus of 2.2 showed most satisfactory result of 34 %${\sim}$42 %. Mass loss rate after fire resistance experiment was most satisfactory at about 10 % in the plain crushed sand without mixing of fiber, and all other mixes with 0.05 % PP fiber or more showed 5${\sim}$10 % loss rate.

• 한국농공학회지
• /
• 제39권2호
• /
• pp.32-43
• /
• 1997

Abstract A series of permeability tests was performed on the mixtures with specific mixing rates of sand and bentonite using modified rigid-wall permeameter. Sand-bentonite mixtures were permeated by organics, ethanol and TCE. Permeability of bentonite with several mixing rates had a tendency to decrease up to initial one pore volume and permeability was thereafter converged to a constant value. When sand-bentonite mixtures was permeated by water, permeability was decreased at the beginning but it was thereafter converged to a constant. Among several mixing rates, permeability was greatly decreased at 15% of mixing rate. When sand-bentonite mixtures with 15% mixing rate was permeated by ethanol, permeability was about 10 times larger value than permeability of water. Peameability was shown greater values when permeated by TCE (TrichloroEthylene) followed by ethanol. Suitable mixing rate of sand-bentonite for a liner of waste landfills was detected.

• 지질공학
• /
• 제13권3호
• /
• pp.345-358
• /
• 2003

근래에 와서 천연골재자원의 보호와 건설 폐기물의 재활용의 측면에서 폐 콘크리트에서 분리한 재생골재의 재활용이 모색되어 왔으나, 재생골재는 주로 콘크리트 도로기층용과 구조물 됫채움재와 같은 저급재료로 사용되고 있다. 본 연구는 재생골재의 콘크리트 용 골재로의 효율적인 재활용 가능성을 위하여, 재생골재의 구성광물, 화학조성 및 공학적 물성 특성 파악하고 재생콘크리트(RCA)의 시공성과 역학적 특성에 대한 연구를 수행하였다. 재생골재에 잔존하는 폐 콘크리트의 모르타르 및 시멘트 페이스트는 골재의 기초 물성 특성, 재생콘크리트의 시공성 및 굳은 콘크리트의 공학적 특성에 주요한 영항을 미치는 것으로 나타났다. 그러나, 적절한 양의 재생굵은골재를 대체한 재생콘크리트는 압축강도와 동결융해 내구성에서 보통 콘크리트의 기준에 근접하는 것으로 나타났다 따라서, 재생골재의 제조과정에서 폐 콘크리트의 모르타르 및 시멘트 페이스트의 제거가 효율적으로 이루어지고 적절한 대체율이 적용되면, 재생골재는 콘크리트용 골재로서 효율적인 사용이 확대 될 수 있을 것으로 사료된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.557-560
• /
• 2008

샌드위치 패널은 전세계적으로 건축공사 전반에 걸쳐 매우 다양한 용도로 활용되고 있다. 우리나라의 경우 유기재료를 심재로 사용한 폴리스틸렌 패널 등을 사용함에 따라 화재에 의한 심재의 용융이나 강판의 변형 등 화재에 매우 취약하고, 유독가스 발생 등에 따른 문제점이 부각되면서 난연또는 불연성능의 확보가 반드시 필요하다. 따라서 이러한 문제점을 해결하고자 샌드위치 패널 심재용 경량기포콘크리트의 최적배합을 도출하여 샌드위치 패널 심재에 적용하고자 한다.본 연구에서는 기포콘크리트를 샌드위치 패널 심재로 활용하기 위하여 기존의 기포방식인 기포제를 첨가하여 경량화 시키는 방식과는 전혀 다른 방식으로 콘크리트 초경량화를 위해 여러 가지 화학반응에 의한 기포 발생 유도 메커니즘을 규명하였다. 그 중 과산화수소($H_2O_2$)를 첨가하여 반응시 발열(發熱)을 유도하고, 콘크리트 기포발생 유도를 극대화시켜 초경량화를 이루기 위한 최적배합 도출 및 폐자재를 활용한 샌드위치 패널 심재용 경량기포콘크리트 충전성 검토, 소요강도 확보가능 여부 등의 다양한 실험을 통해 물리적 역학적 특성을 알아보고자 하였다.

• Advances in concrete construction
• /
• 제14권3호
• /
• pp.205-214
• /
• 2022

Due to seawater's physical and chemical deterioration effects on concrete structures, it is crucial to investigate the durability of these structures in marine environments. In some conditions, concrete structures are exposed to seawater from the first days of construction or because of the lack of potable water, part of the concrete curing stage is done with seawater. In this research, the effects of exposure to seawater after 7 days of curing in standard conditions were evaluated. To improve the durability of concrete, fly ash has been used as a substitute for a part of the cement in the mixing design. For this purpose, 5, 15, and 30% of the mixing design cement were replaced with type F fly ash, and the samples were examined after curing in seawater. The resistance of concrete against chloride ion penetration based on the rapid chloride penetration test (RCPT), water permeability based on the depth of water penetration under pressure, and water absorption test was done. The changes in the compressive strength of concrete in different curing conditions were also investigated. The results show that the curing in seawater has slightly reduced concrete resistance to chloride ion permeation. In the long-term, samples containing FA cured in seawater had up to 10% less resistance to chloride ion penetration. The amount of reduction in chloride ion penetration resistance was more for samples without FA. Whiles, for both curing conditions in the long-term up to 15%, FA improved the chloride ion penetration resistance up to 40%. Curing in seawater slightly increased the penetration depth of water under pressure in samples containing FA, while this increase was up to 12% for samples without FA. In the long-term the compressive strength of samples cured in seawater is not much different from the compressive strength of samples cured in plain water, while at the age of 28 days, due to seawater salts' accelerating effects the difference is more noticeable.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.487-488
• /
• 2009

본 연구는 일반 포러스 콘크리트의 흡음 특성을 개선 하고자, 특수한 방법으로 섬유를 혼입 하는 방법을 개발 하는데 그 목적을 두었다. 가능한 한 섬유가 시멘트 페이스트 내에 함침 되지 않도록 하는 Fuzzy 형태의 포러스 콘크리트를 타설하여 흡음성능을 평가 하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.181-184
• /
• 2004

The objective of this experimental study is to grasp the effect of replacement level of high-quality recycled aggregate on the properties of high-performance concrete. The mixing types were divided into two series based on containing $0\%\;and\;15\%$ fly-ash. Replacement level of recycled aggregate ranged from $0\%\;to\;100\%$. Test results showed that the initial slump and the fluid velocity were independent on the replacement level of recycled aggregate, and the loss of compressive strength was almost $20\%$ with the recycled aggregate only.