• 제목/요약/키워드: Concrete Elastic Modulus

검색결과 475건 처리시간 0.029초

철근 및 GFRP 보강 폴리머 콘크리트 T형 보의 휨 특성 (Flexural Properties of Reinforced Steel and GFRP Reinforced Polymer Concrete T-Beams)

  • 연규석;권택정;정중호;김성기
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
    • /
    • pp.695-698
    • /
    • 2004
  • Recently, the usage of polymer concrete mortar gathering an interest as a new construction material rapidly increases inside and outside of the country because it is an environment-friendly and endurable material. However, up to these days, the researches about the polymer composite have not been satisfactorily conducted. The polymer concrete is superior to the general cement materials in the properties of strength and durability while it is inferior in elastic modulus. Because that the members using the polymer concrete have therefore higher strength and ductility than the members of general cement concrete, an analysis equation of high-strength cement concrete can be referenced but it is not applied for the researches about the polymer concrete members. In this study, the flexural properties of T-shaped beam of the steel- and GFRP-reinforced polymer concrete are analyzed to examine the suggested analysis equation. Results of this experimental researches are to be used as the basic data in a structural design of the polymer concrete.

  • PDF

포아슨 비의 변화를 고려한 수정 ECM 모델 개발 및 아스팔트 콘크리트의 저온 특성 연구 (Development of Modified Effective Crack Model to Take into Account for variation of Poisson's ratio and Low-Temperature Properties of Asphalt Concrete)

  • 권승준;도영수;김광우
    • 한국도로학회논문집
    • /
    • 제3권1호
    • /
    • pp.185-197
    • /
    • 2001
  • 본 연구는 온도에 따라 특성이 변하는 아스팔트 콘크리트의 파괴인성을 규명하기 위하여 기존의 유효균열 모델을 수정하는 연구를 다루고 있다. 본래의 ECM모델은 콘크리트와 같은 고체에 적용되도록 개발되어 재료의 포아슨 비를 고려하지 않는다. 하지만 아스팔트 콘크리트는 온도변화에 민감하여 온도에 따라 포아슨 비가 변화하므로 다양한 온도하에서 정확한 파괴 특성을 알기 위해서는 포아슨 비가 고려되어져야 한다. 3개의 개질아스팔트 결합재를 포함한 4가지 결합재를 사용하여 밀입도 아스팔트 혼합물을 제조하여 초기균열 보에 대한 3점 휨 시험을 $-5^{\circ}C$부터 $-35^{\circ}C$까지에서 수행하였다. 탄성계수, 휨강도 및 파괴인성을 시험을 통하여 구하였다. 시험결과 포아슨비가 고려되는 수정 ECM 공식을 사용하므로서 보다 정확한 값들을 얻을 수 있었다. 폴리머 개질 아스팔트 혼합물이 일반아스팔트 혼합물에 비하여 더 낮은 저온하에서 더 높은 강성과 파괴인성을 유지함을 알 수 있었다.

  • PDF

FRP 보강판 부착 콘크리트에서 유도초음파 모드 거동에 대한 접착층의 영향 (Effect of Bonding Layer on Guided Wave Mode Behavior in FRP Plate Bonded on Concrete)

  • 이용주;신성우
    • 비파괴검사학회지
    • /
    • 제32권1호
    • /
    • pp.34-40
    • /
    • 2012
  • 본 연구에서는 FRP 보강판 부착 콘크리트에서의 유도초음파 기본 모드의 전파 특성에 부착제인 epoxy의 두께와 물성이 미치는 영향을 알아보고자 하였으며, 이를 위해 FRP-epoxy-concrete로 구성된 다층 유도초음파 시스템을 모델링하고 모드 해석을 수행하였다. Epoxy 층의 두께와 탄성계수를 변수로 하여 해석을 수행한 결과, A0 모드에 비해 S0 모드가 epoxy 층의 두께와 탄성계수 변화에 큰 영향을 받으며, 이로부터 경계층인 Epoxy 층의 상태 평가에는 A0 모드에 비해 S0 모드가 유효하리라는 결론을 얻었다.

설계하중 사전재하 및 잔존강도 시험방법에 따른 고강도콘크리트의 고온특성평가 -제 1보, 강도특성을 중심으로- (Evaluation For Mechanical Properties of High strength Concrete by Stressed Test and Tressed Residual Strength Test)

  • 이태규;김영선;이의배;박찬규;김규용;김무한
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
    • /
    • pp.869-872
    • /
    • 2008
  • 최근, 고온가열을 받은 콘크리트의 압축강도, 탄성계수 및 최대하중에서의 변형에 대한 체계적인 연구가 실험적으로 접근되고 있다. 본 연구는 40, 60, 80MPa급 고강도콘크리트의 재료역학적 특성에 있어서 $20{\sim}700^{\circ}C$ 범위로 상승되는 온도의 영향을 연구하는데 그 목적이 있다. 본 연구에서 제안한 시험법은 설계하중 사전재하 및 잔존강도 시험방법으로서 극한강도의 25%하중을 사전재하한 후 시험체의 가열을 하중을 유지한 상태에서 목표온도까지 가열하였고 재하는 고온상태 및 상온에서 24시간 냉각상태에서 시험체가 파괴될 때까지 재하를 실시했다. 시험결과 콘크리트 강도가 증가할수록 상온의 수준과 비교하여 고온에서의 상대적인 압축강도와 탄성계수는 감소하는 것으로 나타났으며 실험결과를 바탕으로 온도의 수준에 따른 압축강도와 탄성 계수의 상관 관계식을 도출하였다.

  • PDF

인공경량골재 콘크리트의 배합과 역학적 성상에 관한 실험적 연구 (An Experimental Study on the Mixing and Mechanical Properties of Artificial Lightweight Aggregate(ALA) Concrete)

  • 김화중;김태섭;전명훈;안상건
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 1991년도 봄 학술발표회 논문집
    • /
    • pp.99-104
    • /
    • 1991
  • It is necessary to generalize the use for structural ALA Concrete in our country, as increasing in the need for the development of ALA and the use of ALA Concrete which is related with the diminution of the self load and foundation section of structure responding to the realistic requirement against the decrease of natural aggregate and the high-rising and large-sizing of structures. This little study, therefore intended to help in the mixing design of concrete by considering the fundamental properties of ALA Concrete used with expanded clay, which is considered by acopting the experimental factors such as unit cement content, water cement ratio and the rate of fine aggregate. By considering the results of this experiment, it has difficulty in getting expected slump with the unit water content of normal concrete because of the large absorption of lightweight aggregate, and because the weight of unit volume and specific gravity ALA Concrete are small it appears that the strength and Elastic Modulus of that are small too and that it is more ductile than normal concrete.

  • PDF

배합 및 타설조건에 따른 수중불분리성 콘크리트의 역학적특성 변화에 관한 실험 (Experiments on Mechanical Characteristics of Anti-Washout Concrete with Mixing and Placing Condition)

  • 양은익;최홍식;허권;이시우
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
    • /
    • pp.141-146
    • /
    • 1999
  • An experimental study is carried out to estimate the effects of mixing and placing condition on the mechanical properties of anti-washout concrete. According to the test results, mixing method and placing temperature do affect the characteristics of rrsh concrete, while they do not affect the strength development of anti-washout concrete. But, concrete strength was greatly affected by the placing condition and placing height. Concrete strength decreases linearly as the placing height increased. Compared to the normal concrete, the increase in strength is not associated much with an increase in the elastic modulus of anti-washout concrete.

  • PDF

경량골재 콘크리트의 수축 저감효과에 관한 적용성 연구 (A Study on the Applicability of Shrinkage Reduction Effect of Light-weight Aggregate Concrete)

  • 임상준;방창준;박종혁
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2011년도 추계 학술논문 발표대회
    • /
    • pp.175-176
    • /
    • 2011
  • Applying previous studies performed in the moisture transportation characteristics and shrinkage of lightweight concrete application of shrinkage reduction is to discuss. Applicability of shrinkage reduction effect of lightweight concrete applies for the analysis of PSC girder bridge beam placed on the construction site. Stress of the concrete bridge deck, rebar quantity is calculated by effective elastic modulus method and crack risk is assessed by moisture transport and differential shrinkage analysis. After approximately 10 days maximum tensile stress occurs 6MPa, similar to the case of normal concrete, a maximum tensile stress occurs 3MPa in lightweight concrete and comparing to normal concrete stress was reduced to approximately 50%. Normal and lightweight concrete crack index, respectively, is reduced 1.6 to 1.2, 1.2 to 0.9 in surface and boundary region. Therefore, reduction in shrinkage of concrete were able to confirm reduction of crack risk.

  • PDF

골재의 종류에 따른 고강도 콘크리트의 시공 특성에 관한 기초적 연구 (A Fundamental Study on the Workability of High Strength Concrete according to Kinds of Aggregate)

  • 최희용;김규용;최민수;김진만;심옥진;김무한
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 1996년도 봄 학술발표회 논문집
    • /
    • pp.12-17
    • /
    • 1996
  • It is true that aggregate strength is usually not a factor in normal concrete strength because, the aggregate particle is several times stronger than the matrix and the transition zone in concrete. In other words, with most natural aggregates the strength of the aggregate is hardly utilized because the failure is determined by the other two phases. But aggregate characteristics that are significant to concrete technology include porosity, grading or size distribution, moisture absorption, shape and surface texture, crushing strength, elastic modulus, and the type of deleterious substances present. Therefore, in the area of high strength concrete, concrete is much more influenced by properties of aggregate. This experiment is performed to investigate how kinds of aggregare influence on the workability of high strength concrete. In this experiment, four types of aggregate is used, that is crushed river aggregate, crushed stone, recycled aggregate of low strength and recycled aggregate of high strength. In this study, we scrutinize a fundmental study on the workability of high strength concrete according to kinds of aggregate.

  • PDF

종진동특성을 이용한 부착식 텐던의 긴장력 추정 타당성 연구 (Feasibility Study of Estimating Prestress Force of Grouted Tendons)

  • 김병화;장정범;이홍표
    • 대한토목학회논문집
    • /
    • 제30권2A호
    • /
    • pp.103-111
    • /
    • 2010
  • 본 연구는 부착식 텐던의 종진동수를 이용하여 텐던의 장력을 추정할 수 있는지 여부를 알아보는 타당성 연구이다. 본 연구를 위하여 총 8개의 프리스트레스 콘크리트 보 시험체가 특수 제작되었다. 각각의 시험체는 도입장력이 다른 부착식 텐던이 설치되었다. 부착식 텐던의 종진동 특성을 파악하기 위하여 다양한 종진동실험이 반복 수행되었다. 실험결과를 살펴보면, 텐던에 도입된 장력이 증가함에 따라서 종진동수, 탄성파속도 및 탄성계수가 비선형적으로 증가하였다. 그러므로 종진동 특성을 이용한 부착식 텐던의 장력평가는 가능 할 것으로 판단된다.

시공중 계측을 통한 초기 콘크리트의 거동분석 (Analysis of Early-Age Concrete Through Instrumentation During Construction)

  • 오병환;최성철;신준호
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2002년도 가을 학술발표회 논문집
    • /
    • pp.795-798
    • /
    • 2002
  • Recently. the properties of early-age concrete are increasingly important because these properties directly influence the behavior of early-age concrete structures including stress and cracking behavior. Nevertheless, the studies on early-age concrete are limited to strength and temperature development. The purpose of present study is to propose a simple and rational method which can predict the stress and strain behavior of young age concrete. A series of test have been done to measure the temperature development, strains and stresses in concrete members. The concept of equivalent age was used to define the degree of hydration and this degree of hydration was used to calculate the strength and elastic modulus. The present study indicates that the calculated stresses correlate fairly well with measured stresses. The consideration of critical degree of hydration in calculating stresses gives more accurate results. The present study provides useful method and data in evaluating early-age behavior of concrete structure.

  • PDF