• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 추계 학술대회논문집
• /
• pp.269-273
• /
• 2005

The on-board system for the air supply to the payload fairing(PLF) of a launch vehicle using both high and low pressure air was designed. The design concept was obtained from the CFD analysis of a Russian interstage air supply system, and a collector was adopted to expand the high pressure air. To verify that the on-board system would work as designed, a simplified axisymmetric computational model was made and a CFD analysis was also performed. It was found that the flow ejected from the hole of the collector expands to the Mach number of 4 and is soon retarded due to the action of viscosity. It was also found that a small gap between the low pressure duct and equipment bay wall can cause large velocity in PLF over the velocity requirement and no gap should be allowed in the design.

• 한국위성정보통신학회논문지
• /
• 제9권4호
• /
• pp.127-133
• /
• 2014

본 논문에서는 탑재운영절차서 실행환경을 위한 Lua 인터프리터 기반의 가상머신 설계와 기능 및 성능분석 결과를 나타낸다. 한국항공우주연구원에서 계획 중인 달 탐사 임무를 온보드상에서 자율적으로 운영하기 위해 탑재운영절차서 실행환경의 개발이 요구되어졌다. 탑재운영절차서는 위성에 탑재되어 지상 간섭없이 자율적으로 임무 수행을 가능케 함으로써 전파 지연과 제한된 데이터 통신용량을 갖는 심우주 임무들에서 이미 적용되고 있다. 가상머신의 실행엔진인 인터프리터는 고급언어로 작성된 원시코드를 한줄씩 번역하고 실행하므로 컴파일러에 의해 생성된 코드가 실행되는 것에 비해서 실행 속도가 현저하게 느리다. 이를 극복하기위해 레지스터 기반의 Lua 인터프리터를 적용하여 탑재운영절차서 실행환경 설계 및 구현하였으며 실험을 통해 여러 요소들에 따른 성능분석을 수행하였다. 성능분석 결과는 탑재운영절차서 스케줄링 방안 뿐 아니라 Lua 인터프리터를 적용하는 시스템에 적용될 수 있을 것으로 기대된다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제19권2호
• /
• pp.84-91
• /
• 2015

이 논문에서는 기존 복공판의 단점들을 극복하기 위해 새로이 제안된 신개념 복공판에 대한 안전성 검토와 성능을 검증하기 위한 매개변수해석을 실시했다. 고려된 모든 해석변수와 단부 보강위치 및 크레인 하중에 대해 계산된 강재의 응력이 허용응력 이내의 값을 보여주어 모든 경우가 구조적으로 안전한 복공판인 것으로 확인되었다. 구조적 안정성과 경제성을 고려했을 때 최적의 복공판은 판의 크기가 크고 두께가 얇은 "$3,000{\times}2,000{\times}6t$"로 결정하였으며 보강은 단부 내측을 보강하는 것이 가장 좋을 것으로 판단되었다. 또한, 기존 복공판 대비 단위면적당 강재량을 36%정도 감소시켜 경제적으로도 우수하며, 복공판 개소가 적어 시공속도가 빠르기 때문에 지하철 및 지하차도 복공구조체에 적용이 가능할 것으로 판단된다.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제5권1호
• /
• pp.23-32
• /
• 2002

The introduction of hybrid and exploitation of heterosis has played a vital role in Indian sericulture industry, which clearly depicts a quantum jump in silk production during the last four decades. Since, the introduction of heterosis, progress in silkworm breeding has depended on success or failure in identifying better combiners. Systematic procedures developed have enabled the breeders to identify the best combiners by combining ability test, line ${\TIMES}$ tester analysis or $D^2$ analysis for maximum expression of heterosis. The level of heterosis expressed in the crossbreed population is determined by the interaction between genotype and prevailing environmental factors. Except some of the pre and post cocoon parameters, heterosis is invariably higher in single crosses compared to three-way and double crosses. However, during hot and humid season, when rearing of F1 bivoltine hybrid is unsuccessful at field level and indigenous races results in very low and poor quality yield, three-way and double crosses can play an important role as an intermediary technology. The objective of this article is to review briefly the concept and causes of heterosis, utilization of different forms of heterosis in silk production and its significance in silkworm, Bombyx mori breeding.

• 한국기계가공학회지
• /
• 제2권2호
• /
• pp.14-21
• /
• 2003

Rapid prototyping(RP) has been used for design verification and proto sample or mold manufacturing. Many RP systems have been introduced into the market during the past 15 years. However, until now, the systems have used mainly for external physical models (mono function), and have the basic but critical limitation of one material on one stage (mono material). To overcome the limitations of mono-material and mono-function of conventional. RP systems, the concept of Functional Phototype Development (FPD) is newly proposed in this paper FPD provides the necessary prototype functions such as mechanical, optical, chemical and electrical properties in order to meet the broad requirements of the industry. The paper illustrates the representative achievements of electronic components such as the multi-layer printed circuit board(MLB). Experimental results demonstrate that FPD has great potential applied to broad industrial uses and that It Will be a powerful tool in the neat future.

• 한국가구학회지
• /
• 제28권3호
• /
• pp.145-155
• /
• 2017

This study explores developing a piece of modularized and multi-useful bed adapting PyeongSang followed by the last issue, 'a study on traditional Korean furniture, PyeongSang I' for the understanding of the furniture from theory and history. Adopted From the joints and ornament, the modularized elements were designed and developed in order to compose the head board, the side board, the foot board, and the seat bottom. The joints are sambang miter, samae miter, dado, and mortise and tenon, which are strong in holding the bed. And the ornament is lattice patterns like geokjamun and manjamun, elephant eyes patterns like ansangmun from the traditional furniture. Using the elements, the bed is composed with six modules which make people free and easy to move and transform them. Hence, the bed is multi-useful by using the double, the twin the single, and various sofas by the way to display them such as two, three, four, five, and six modules. And the bed was made of bright zelkova tree and dark heat treated ash expressing contrast of black and white, the design concept modern and easy to make many people access to them.

• 경영과정보연구
• /
• 제16권
• /
• pp.95-115
• /
• 2005

Although advertising plays an important role of information source for consumer, also advertising affect negative influence to the consumer and social system. Under the such a concept, this study reviewed the social responsibility of advertising and the freedom of expression including the foreign country's advertising regulation system as the theoretical background of advertising regulation. In addition, this study analyzed the case of the advertisement reviews by Korea Advertising Review Board(august 1, 2000, the business concerning prior deliberation of broadcast advertisements was entrusted to the Korea Advertising Review Board, a civilian self-regulatory body, by the Korean Broadcasting Commission) and Fare Trade Commission. As the result of data analysis, some problems of regulation system and codes are suggested and discussed as follows: (1) the high ratio of rejection (2) using the unnecessary foreign language (3) inconsistency application of deliberation standard.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2731-2734
• /
• 2011

Korean-Automated Guideway Transit (K-AGT) was successfully developed through Light Rail System Development Project. Since then, the domestic development rate of on-board signalling system of light rail has been improved up to 90% by Practical Utilization Project of Light Rail. After utilization project, furthermore, POSCO ICT has developed the wayside signalling system of CBTC, including wireless communication equipment. KRRI carried out the performance test of the wireless communication, interfacing and using the other CBTC equipments of KyungSan Test Line so as to see whether it conforms IEEE 802.11x, international communication standard in view of operational concept of CBTC. In this paper, we presents the test plan, test items, and the analysis results of maximum communication distance tests between on-board and wayside radio sets.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 추계학술대회
• /
• pp.111-112
• /
• 2017

This paper presents a novel three-port converter for the OnBoard Charger of Electric Vehicles by using an impedance control network. The proposed concept is suitable for charging a main battery and an auxiliary battery of an electric vehicle at the same time due to its power handling capability of the converter without additional switches. The power flow is managed by the phase angle (${\Theta}$) between the ports whereas voltage at each port is controlled by the asymmetric duty cycle and the phase shift (${\Phi}$) between the inverter lags controlled by the impedance control network. The proposed system has a capability of achieving zero voltage switching (ZVS) and zero current switching (ZCS) at all the switches over the wide range of input voltage, output voltage and output power. The feasibility of the proposed system is verified by the PSIM simulation.

• Smart Structures and Systems
• /
• 제3권1호
• /
• pp.69-88
• /
• 2007

In this study, Field-Programmable Gate Arrays (FPGAs) are investigated as a practical solution to the challenge of designing an optimal platform for implementing algorithms in a wireless sensing unit for structuralhealth monitoring. Inherent advantages, such as tremendous processing power, coupled with reconfigurable and flexible architecture render FPGAs a prime candidate for the processing core in an optimal wireless sensor unit, especially when handling Digital Signal Processing (DSP) and system identification algorithms. This paper presents an effort to create a proof-of-concept unit, wherein an off-the-shelf FPGA development board, available at a price comparable to a microprocessor development board, was adopted. Data processing functions, including windowing, Fast Fourier Transform (FFT), and peak detection, were implemented in the FPGA using a Matlab Simulink-based high-level abstraction tool rather than hardware descriptive language. Simulations and laboratory tests were carried out to validate the design.