• Structural Engineering and Mechanics
• /
• 제28권2호
• /
• pp.207-220
• /
• 2008

The shear lag has been studied for many years. Nevertheless, existing research gives a variety of stress concentration factors. Unlike the elementary beam theory, the application of load is not unique in reality. For example, concentrated load can be applied as point load or distributed load along the height of the web. This non-uniqueness may be a reason for the discrepancy of the stress concentration factors in the existing studies. The finite element method has been often employed for studying the effect of the shear lag. However, not many researches have taken into account the influence of the finite element mesh on the shear lag phenomenon, although stress concentration can be quite sensitive to the mesh employed in the finite element analysis. This may be another source for the discrepancy of the stress concentration factors. It also needs to be noted that much less studies seem to have been conducted for the shear lag effect on deflection while some design codes have formulas. The present study investigates the shear lag effect in a simply supported box girder by the three-dimensional finite element method using shell elements. The whole girder is modeled by shell elements, and extensive parametric study with respect to the geometry of a box girder is carried out. Not only stress concentration but also deflection is computed. The effect of the way load is applied and the dependency of finite element mesh on the shear lag are carefully treated. Based on the numerical results thus obtained, empirical formulas are proposed to compute stress concentration and deflection that includes the shear lag effect.

• 한국산업보건학회지
• /
• 제30권2호
• /
• pp.236-248
• /
• 2020

Objectives: The purpose of this study was to evaluate the concentrations of particulate matter generated during coffee roasting and to study various factors affecting the concentrations. Methods: Differences in concentration levels were investigated based on various factors to understand the emission rates of particulate matter over time and to compare the mass and number concentrations according to their size. Sampling was performed in closed laboratories without the operation of air conditioning or ventilation. Optical Particle Sizer(OPS) was used as a measuring device. An OPS measures using a light-scattering method. Sampling was performed for sixty minutes at one-minute intervals. The background concentration was measured for about 30 minutes before starting of coffee roasting. The concentrations of particulate matter generated during coffee roasting were monitored until roasted coffee beans were removed from the roaster and cooled down. Several factors affecting the concentrations of particulate matter were investigated, which includes the origins of green beans, the roasting level, and the input amount of green beans. Results: The results of this study may be summarized as follows: 1) There was no difference in particulate matter concentration levels by the origin of the green beans, but a statistically significant difference in concentration levels by roasting level and the input amount of green beans; The higher the roasting level, the higher was the particulate matter concentration. The more green beans we put in the roaster, the higher were the concentrations; 2) The PM10 mass concentrations increased over time. The average concentration after roasting was higher than the average concentration during roasting; 3) In the distribution of mass and number concentration by particle diameter, the majority of particles was below 2.5 ㎛. Conclusions: Persons who work in roastery cafes can be exposed to high concentrations of particulate matter. Therefore, personal exposure and risk assessment should be conducted for roastery cafe workers.

• Journal of Nutrition and Health
• /
• 제32권6호
• /
• pp.713-725
• /
• 1999

Women have a greater incidence of coronary heart disease(CHD) after menopause. It relates to hormone imbalance-induced changes in known CHD risk factors, especially hyperlipidemia. Accordingly, once women are diagnosed, the rate of morbidity and mortality is greater than for men. Thus, preventive strategies are critical to improve the quality oflife in the later years for women. The purpose of ths study was to explore the difference of anthropometric, environmental factors and food behaviors between normocholesterolemia and hypercholesterolemia within postmenopausal women. The subjects were classified as normocholesterolemia and hypercholesterolemia based on the Guideline for Korean Hyperlipidemia. The results obtained are summarized as follows. The distributions of general characteristics such as age, family income, occupation status, age at menarche, and menopausal period were not significantly different between the normocholesterolemia group and hypercholesterolemia group. The anthropometric factors such as body mass index(BMI) and waist hip ratio(WHR) were not significantly different between the normocholesteroemia group and the hypercholesterolemia group but odds ratio of hypercholesterolemia group was higher than that of normocholesterolemia but not significant. Aerobic activity more than 1hours/day was significantly related to low serum cholesterol concentration. Eating behaviors related to regular meal time, regular breakfast habit, and slow meal speed were related to low serum cholesterol concentration. Eating the chicken without skin was significantly related to low serum cholesterol concentration. Our data indicate that desirable eating habit, aerobic activity more than 1hr/day are important factors of serum cholesterol concentrations in postmenopausal women. The result of this study provide information that is important in designing appropriate dietary guidelines for hypercholesterolemia in postmenopausal women.

• 한국환경보건학회지
• /
• 제44권3호
• /
• pp.205-216
• /
• 2018

Objectives: Scientific verification for health effects has been constantly demanded through the forest healing factors. In this study, phytoncide concentration which is one of the forest healing factors, was investigated according to stand density, season and visiting time, and analyzed correlation with micrometeorology factors. Methods: Total volatile organic compounds (TVOCs) and Natural volatile organic compounds (NVOCs) were collected using a measuring instrument which is connected to an air pump with the Tenax TA tube. The 32NVOCs were selected through the detailed criteria of adequacy assessment for recreational forest. The statistical analysis (correlation and stepwise regression analysis) was conducted between phytoncide concentration and micrometeorology factors. Results: NVOCs concentration linearly increased according to stand density. The high level showed in the summer (p<0.05), and there is no significant difference according to visiting hours of the Healing forest. NVOCs is a negative correlation with solar radiation, PAR and wind direction, and a positive correlation with relative humidity and temperature (p<0.01). NVOCs increased following the increase of humidity and temperature ($R^2=0.55$). Conclusions: Phytoncide linearly increased according to stand density, and showed the correlation significantly with microclimate factors. In future, these results will be utilized as a basic material to promote the generation of phytoncide, which positively influences human health promotion and manage the forest welfare space.

• 한국실내디자인학회논문집
• /
• 제22권1호
• /
• pp.174-182
• /
• 2013

This study divided the observation area in an indoor space for area setup to analyse the effect of the difference of design types on the characteristics of observation with the observed time of each area as objects. Though it is thought that the difference of design patterns may be influenced by the factors and material composing the space, no existing approaches have had any quantitatively measuring method. Eye-tracking could be efficiently utilized for observation analysis from the viewpoint of dating observation behavior. The followings are the results of analysing the observation characteristics depending on design pattern. First, 5 observing areas were set up according to concentration of observation time in order for the concentration by area to be examined and the factors of design having effect on the difference of observation patterns by design type could be analysed. Second, as a whole, the observation of modern types showed high observation characteristics. When the difference of observation characteristics by pattern was examined by difference at observation frequency, the observation frequency defined to be more than 50% was seen to be almost same from Area I to III and to get higher from Area IV, and that defined to be 30% was high at Areas III and IV. In Area V, it was very high at natural. Third, that of Area II is no more than 8.2% but had the most observation time. As for observation characteristics, the horizontal observation of the central part was the highest and had more observation frequency at modern type that at natural one. These observation characteristics by area enabled to analyse the observation tendency depending on design characters at relevant area. Fourth, the design factors composing natural type were found to bring more attention when the area showed higher concentration at natural type than at modern one. And the analysis of design factors could make it to be confirmed that the quality of material and background factors in addition to design factors in the area had more effect on sight concentration.

• The Korean Journal of Ecology
• /
• 제13권3호
• /
• pp.215-224
• /
• 1990

The distribution of Spirodela polyrhiza and Lemna aequinoctialis was investigated and the limiting factors on the distribution were analyzed. At 66 sites in Korea, the presense or absense of duckweed were recorded and the water was sampled. The temperature, hardness, pH and contents of N, , , Na, K, Ca, Cu, Mg, Zn, Fe, Ni, Mn and Cd of water sampled were analyzed. The results were as follows; It seemed that the limiting factors influencing on the distribution was water temperature and concentration of . The critical temperature of the distribution of Spirodela and Lemna was presented 19.5$^{\circ}C$ and concentration of was limiting factor only in the distribution of S. polyrhiza. L. aequinoctialis was distributed in lower temperature than S. polyrhiza and it seemed that the distribution of L. aequinoctialis was not be influenced by the concentration of .

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제27권1호
• /
• pp.24-31
• /
• 2005

Recently, Platelet rich plasma(PRP) is commonly used because it is now well known that platelets have many functions beyond that of simple hemostasis in aspect of containing autogenous source of several growth factors. It could be responsible for increasing cell mitosis, increasing collagen production, recruiting other cells to the site of injury, initiating vascular ingrowth, and inducing cell differentiation, enhancing bone formation capacity and easily handling to clinician. However, in spite of these clinical advantages, still the theory behind the use of PRP is compelling. This study was to determine preparation techniques used to increase the concentration of platelets and growth factors are all crucial steps in early wound healing of bone graft which may lead to a more rapid and denser bone regenerate. 200 volunteers were sampled and PRP were prepared according to each evaluation item in this study. Higher concentration of platelets have been gained in double centrifugation. 2000 and 2500 rpm showed proper concentration of platelets at first centrifugation and 5000 rpm in second. Timing for 2 minutes was showed good concentration of platelets in high and low centrifugation speed. It was better concentration of platelets in 20 or 30 ml volume during centrifugation. In histomorphologic findings, degrnulated and high concentraion of platelets were found in low centrifugation speed.

• Journal of Mechanical Science and Technology
• /
• 제18권5호
• /
• pp.808-813
• /
• 2004

The stress analysis on orthotropic composite cylindrical shells with one circular or one elliptical cutout subjected to an axial force is carried out by using an analytical and experimental method. The composite cylindrical shell governing equation of the Donnell's type is applied to this study and all results are presented by the stress concentration factor. The stress concentration factor is defined as the ratio of the stress on the region around a cutout to the nominal stress of the shell. The stress concentration factor is classified into the circumferential stress concentration factors and the radial stress concentration factors due to the cylindrical coordinate of which the origin is the center of a cutout. The considered loading condition is only axial tension loading condition. In this study, thus, the maximum stress is induced on perpendicular region against axial direction, on the coordinate. Various cutout sizes are expressed using the radius ratio, (equation omitted), which is the radius of a cutout over one of the cylindrical shell. Experimental results are obtained using strain gages, which are attached around a cutout of the cylindrical shell. As the result from this study, the stress concentration around a cutout can be predicted by using the analytical method for an orthotropic composite cylindrical shell having a circular or an elliptical cutout.

• 한국산업보건학회지
• /
• 제21권2호
• /
• pp.90-98
• /
• 2011

Objectives: The aim of this study was to evaluate the level of urinary mercury and analyze which factors would affect urinary mercury concentration among dental hygienists in dental clinics. Methods: This study conducted by questionnaire and detection of urinary mercury concentration of 268 dental hygienists working in dental clinics from July to August of 2009. Data collected from two hundred and thirty-five dental hygienists were analyzed by the geometric mean (GM). Analytical results of urine samples with less than 0.3 g creatinine/L and greater than 3g creatinine/L were excluded from statistical analysis. Results: Urinary mercury concentration of 235 dental hygienists showed the geometric distribution. The arithmetic and geometric means of urinary mercury concentration were $0.996{\mu}g/g$ creatinine and $0.755{\mu}g/g$ creatinine, respectively. From multiple regression analysis, the number of amalgam filling, the consumption frequency of raw fish and the number of amalgam handling in current workplace was revealed as increasing factors of urinary mercury concentration. Conclusions: The level of urinary mercury in dental hygienists was higher than in general Korean population. The number of amalgam filling, the consumption frequency of raw fish and the number of amalgam handling in current workplace was revealed as increasing factors of urinary mercury concentration. Therefore using resin materials instead of amalgam in dental clinics is highly desirable.

• 기술혁신연구
• /
• 제12권1호
• /
• pp.115-134
• /
• 2004

In this paper, we tried to find the bottleneck factors of firms' innovative activities using the KIS (Korea Innovation Survey) 2002 data. Employing the method of factor analysis, we identified five bottleneck factors of innovative activities: organizational bottleneck factor, innovative bottleneck factor, economic bottleneck factor, supply-chain bottleneck factor, and market-environment bottleneck factor. Using regression analysis which includes the five bottleneck factors, industry characteristics variables (market concentration, technological opportunity, appropriability), and other control variables, we found (1) that all the five bottleneck factors are negatively related with innovative activities, (2) that technological opportunity and appropriability conditions are positively related with innovative activities, (3) that there is an inverted-U relationship between market concentration and innovative activities, and (4) that firm size has no significant influence on firms' innovative activities.