• Journal of Korean Medicine Rehabilitation
• /
• v.30 no.2
• /
• pp.19-35
• /
• 2020

Objectives The aim of this study is to evaluate the fracture healing effect of Jinmu-tang (JM) on femur fractured rats. Methods Rats were randomly divided into 5 groups (normal, control, positive control, JM extract with low concentration and JM extract with high concentration). All group except normal group went through both femur fracture. Normal and control group received no treatment at all. Positive control group were medicated with tramadol (20 mg/kg) once a day for 14 days. Experimental group was orally medicated with JM extract (10 mg/kg for low concentration, 50 mg/kg for high concentration) once a day for 14 days. In order to investigate fracture healing process, plasma and serum were obtained. Also, micro-computed tomography was conducted to see the frature site visually. Immunohistochemistry for transforming growth factor-β1, Ki67, alkaline phosphatase, runt-related transcription factor 2, receptor activator of nuclear factor kappa-β, tartrate resistant acid phosphatase was conducted to observe bone healing progress after 14 days since fracture occured. Aspartate aminotransferase, alanine aminotransferase, blood urea nitrogen and creatinine levels were measured in plasma, for hepatotoxicity and nephrotoxicity of JM extract. Osteocalcin was measured to observe activity of osteoblast. Results Through Micro-CT, more fracture healing was observed on both experimental group than control and positive control group. Through Hematoxylin & Eosin and safranin O staining showed bone cell proliferation and bone formation in the experimental group. RANK was significantly increased in the experimental groups. JM with high concentration showed statistically significant of TGF-β and Osteocalcin. NO, TRAP and ALP were not significantly changed. Liver toxicity was not significantly observed. Creatinine significantly increased in both experimental groups after 28 days. Conclusions As described above, JM extract showed anti-inflammatory effect, promoted fracture healing by stimulating the bone regeneration factor, and showed little hepatotoxicity and nephrotoxicity. In conclusion, JM extract can promote fracture healing and it can be used clinically to patients with fracture.

• KIEAE Journal
• /
• v.5 no.1
• /
• pp.51-57
• /
• 2005

In this study, time-dependent concentration variations of VOCs from fixed furniture and Ondol floor widely used as finishing material of the floor were measured, and prediction equations were developed based on the measured results. VOCs were measured and analyzed based on EPA TO-17 and NIOSH 1500, 1501 method respectively, and GC/FID were used for the analysis of VOCs concentration. Measurements were carried out for 10 days after the installation of furniture and for 40 days after the installation of the floor in the residence constructed more than 10 years ago. In both case of floor and furniture installation, time-dependent concentration decay of VOCs can be properly converted into logarithmic scale. Especially in case of furniture, toluene showed the highest concentration and took longest time to decay. As a result of the prediction of VOCs concentration decay under different air change rate using estimated equations, concentration decay rate of indoor VOCs increased rapidly as the air change rate also increased.

• Journal of Environmental Impact Assessment
• /
• v.12 no.2
• /
• pp.99-108
• /
• 2003

We collected and analyzed PM10 samples to account for the characteristics of heavy metallic elements for yellow sand and non-yellow sand during springtime of 2002 at Busan, The mean PM10 mass concentration for springtime of 2002 was $219.82{\mu}g/m^3$ with the maximum $787.50{\mu}g/m^3$ and the minimum $19.44{\mu}g/m^3$. The mean concentration of metallic elements contained in PM10 are shown as follows : Si>Ca>Fe>Al>Na, respectively. The ratio of mean PM10 mass concentration for yellow sand($362.7{\mu}g/m^3$) to that for non-yellow sand($48.3{\mu}g/m^3$) was 7.5, the significant positive correlation (P<0.05) was found between yellow sand and non-yellow sand. The metallic elements concentration ratios of yellow sand to the non-yellow sand were over 10 times for Al, Ca, Mg, 4~8 times for Fe, Si, Mn. But the concentration of Na, Cu, Zn for non-yellow sand was higher than those of yellow sand. The crustal enrichment factor of Cd, Cu, Pb, Zn, Cr, K, Mn, Na, Ni for yellow sand was higher that of non-yellow sand over 10 times, and concentration rate of soil particles of yellow sand was increased 2.3 times that of nonyellow sand.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.17 no.1
• /
• pp.8-12
• /
• 2014

Reduced pressure evaporation applies the principle of lowering water's boiling point by reducing the pressure. It uses the relation between temperature and pressure to reduce energy consumption needed for elevating temperature. As the result, the highest evaporation was observed at $80^{\circ}C$ and -40 cmHg applying saturated vapor pressure depending on different seawater temperature. It was found that the higher concentration in the factor test experiment depending on seawater concentration induced the higher evaporation. Also, in the factor test experiment, the amount of evaporation increased as the pressure decreased. It is concluded that the most important factor of evaporation was concentration, the second important factor was temperature, and the least important factor was pressure. Through this experiment, optimized conditions of desalination with reduced pressure evaporation device were verified.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.6
• /
• pp.989-993
• /
• 2007

A lactose-hydrolyzed milk with low sweetness was developed using nanofiltration. Raw milk was treated with 0.03% ${\beta}$-galactosidase at $4^{\circ}C$ for 24 h to hydrolyze lactose partially. The resultant lactose-hydrolyzed milk containing 0.43% lactose was then concentrated using a nanofiltration membrane to reach concentration factor of 2.13. The concentration factors and coefficients of retention of milk components in nanofiltration were determined. The concentration factor of milk fat was 2.20 which was the highest of the milk components. The coefficient of retention of calcium and riboflavin was 0.96 and 0.76, respectively. However, the coefficient of retention of glucose, galactose, and sodium was 0.21, 0.15, and 0.22, respectively. Raw milk was treated with 0.1% ${\beta}$-galactosidase at $4^{\circ}C$ for 40 h to hydrolyze lactose fully and then concentrated to reach a concentration factor of 1.6 by using nanofiltration. The concentrated milk was reconstituted with water. The lactose-hydrolyzed milk had sweetness similar to milk. The compositional ratios of crude protein, calcium, sodium, and riboflavin of lactose-hydrolyzed nanofiltrated milk to those of raw milk were 99%, 97%, 77%, and 80%, respectively. This study showed that nanofiltration of lactose-hydrolyzed milk to remove galactose and glucose did not cause significant loss of calcium. The lactose-hydrolyzed nanofiltrated milk contained 0.06% lactose and had sweetness similar to milk.

• Journal of Environmental Science International
• /
• v.21 no.11
• /
• pp.1339-1348
• /
• 2012

The versatile aerosol concentration enrichment system (VACES) have proven useful for providing elevated levels of atmospheric aerosol to human and animal exposures. In this study, we describe a VACES and tests conducted to both optimize the enhancement factor (EF) and characterize how it depends on experiment conditions. Particle number concentrations were measured from upstream and downstream of the system by scanning mobility particle sizer (SMPS) with a long differential mobility analyzer (DMA) in combination with a condensation particle counter (CPC). SMPS was used for to determine VACES particle EF. Particle EF tends to increase for higher the saturator temperature ($T_{Sat}$) and lower the condenser temperature ($T_{Con}$). $T_{Con}$ higher than $0^{\circ}C$ and $T_{Sat}$ lower than $50^{\circ}C$ was the best to obtain the most increase in particle concentration. Correlation analysis of EF with factor variables of $T_{Sat}$ and $T_{Con}$ resulted in correlation 0.662 and 0.416, respectively. With all five predictor variables included in a multiple regression model, the EF had a liner correlation with $R^2=0.643$.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.5 no.2
• /
• pp.120-126
• /
• 2005

We have proposed a characteristic method to estimate real composition when multi component oxide films are deposited by ALD. Final atomic concentration ratio was theoretically calculated from the film densities and growth rates for $HfO_2$ and $Al_2O_3$ using ALD processed HfxAhOz mms.W e have transformed initial source feeding ratio during deposition to fins] atomic ratio in $Hf_xAl_yO_z$ films through thickness factors ($R_{HFO_2}$ ami $R_{Al_2O_3}$) ami concentration factor(C) defined in our experiments. Initial source feeding ratio could be transformed into the thickness ratio by each thickness factor. Final atomic ratio was calculated from thickness ratio by concentration factor. It has been successfully confirmed that the predicted atomic ratio was in good agreement with the actual measured value by ICP-MS analysis.

• Membrane Journal
• /
• v.19 no.3
• /
• pp.212-221
• /
• 2009

This study focuses on preparation of PVDF/PDMS composite membranes to effectively separate butanol from water-butanol mixture using pervaporation. We prepared various composite membranes by changing PVDF concentration of support layer and PDMS cross-linking condition of active layer. Pervaporation performance was tested by measuring butanol flux and separation factor with various cases of butanol concentration, temperature, and flow rate of feed. As results, performance of our novel PVDF/PDMS membranes surpasses that of PVDF/POMS membrane, manufactured by GKSS (Germany), in term of butanol flux, permeate concentration, and separation factor.

• Journal of Ocean Engineering and Technology
• /
• v.8 no.2
• /
• pp.141-150
• /
• 1994

In designing, the strength of tubular joint has been an important problem for integrity of steel structures in which many tubular members are used. This paper presents the results of FEM analysis on stress concentration and fatigue crack initiation life for two types of tubular joints. One is circular and rectangular T type joints which consist of circular brace and rectangular chord. Another is circular and circular T type joints which consist of circular brace and circular chord. FEM analyses were performed under the axial load and in-plane bending moment. The fatigue crack initiation life can be estimated by using $\varepsilon$-N curve and by applying the Palmgren-Miner linear damage rule. According to the results, the stress concentration factor(SCF) of circular and rectangular joints is higher than that of circular and circular joints. The fatigue crack initiation lives of circular-circular joints and circular-rectangular joints were calculated.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.19 no.3
• /
• pp.367-386
• /
• 2021

The overestimation and underestimation of the radioactivity concentration of difficult-to-measure radionuclides can occur during the implementation of the scaling factor (SF) method because of the uncertainties associated with sampling, radiochemical analysis, and application of SFs. Strict regulations ensure that the SF method as an indirect method does not underestimate the radioactivity of nuclear wastes; however, there are no clear regulatory guidelines regarding the overestimation. This has been leading to the misuse of the SF methodology by stakeholders such as waste disposal licensees and regulatory bodies. Previous studies have reported instances of overestimation in statistical implementation of the SF methodology. The analysis of the two most popular linear models of the SF methodology showed that severe overestimation may occur and radioactivity concentration data must be dealt with care. Since one major source of overestimation is the use of minimum detectable activity (MDA) values as true activity values, a comparative study of instrumental techniques that could reduce the MDAs was also conducted. Thermal ionization mass spectrometry was recommended as a suitable candidate for the trace level analysis of long-lived beta-emitters such as iodine-129. Additionally, the current status of the United States and Korea was reviewed from the perspective of overestimation.