• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.3
• /
• pp.404-413
• /
• 2008

Major objectives were to evaluate effects of three schemes of bST-supplementation of Holstein cows (142.8 mg/14 d, POSILAC) during the prepartum and/or postpartum periods through 63 d (${\pm}3d$) of lactation. Measures evaluated the potential of treatments to improve body weight (BW) and body condition score (BCS), provoke changes in plasma concentrations of somatotropin (ST) and IGF-I, and improve milk yield, milk composition (percentages of protein and fat, and somatic cell counts), and several calving variables. Multiparous Holstein cows were randomly assigned to a $2{\times}2$ factorial arrangement of treatments (TRT) to give four groups (I = no bST, n = 26; II = bST postpartum, n = 25; III = bST prepartum, n = 27; IV = bST prepartum and postpartum, n = 25). During the prepartum period, cows in groups I and II were not supplemented but those in groups III and IV were supplemented every 2-wk beginning 21 d before expected calving date through calving. During the first 63 DIM only cows in groups II and IV were supplemented with bST. From 64 DIM through the end of lactation cows in all groups were supplemented with the full lactation dose of bST (500 mg/14 d). The BW and BCS were recorded weekly throughout the prepartum and postpartum periods and every 2-wk beyond 70 DIM. Blood samples were collected 3-times a week for analyses of ST and IGF-I. Milk yields were recorded daily though 150 DIM. Prepartum supplementation of bST did not affect BW or BCS, but mean concentrations of ST were increased 12.2% and were 15.5% greater at calving. Overall, mean concentration of IGF-I was not affected by treatment but concentrations were greater at 1 and 2 wk before calving in bST-supplemented cows. During the first 63 DIM the BW and BCS were not affected by treatment. Significant effects of bST-supplementation were detected on concentrations of ST, IGF-I and on milk yield compared to non-supplemented cows in group I. Postpartum concentrations of ST were greater in bST-supplemented cows (TRT II and IV; +41.9 and 54.6%). However, concentrations of IGF-I were greater only in cows in group IV (+25.9%) during the postpartum period. Overall, the three bST-supplemented groups had greater actual milk yield than the control group (I) during the first 63 and 150 DIM. The actual milk yields during 63 and 150 DIM were 6.5 and 4.6 kg/d greater for cows in group IV than cows in group I and the 305-d ME milk yield also was 15.6% greater. No adverse effects of TRT were observed on calf birth weight, colostrum immunoglobulins, ease of calving or other measures evaluated.

• Journal of the Korean Chemical Society
• /
• v.31 no.5
• /
• pp.413-418
• /
• 1987

Rates of the reaction for p-nitro benzyl chloride, benzyl chloride and p-methyl benzyl chloride with pyridine in methanol solvent have been measured by an electric conductivity method at 40$^{\circ}$C and 50$^{\circ}$C under various pressures (1∼2000bar). Pseudo first-order rate constants and second-order rate constants were determined. Rates of these reactions were increased in the order p-NO$_2$ < p-H < p-CH$_3$ and increased with temperature, pressure and concentration of pyridine. From those rate constants, the activation parameters were evaluated. The activation volume and the activation compressibility coefficient are both negative values, but the activation enthalpy is positive and the activation entropy is large negative value. From the evaluation of the ground state and transition state which was resulted from substituents and pressure, it was found that this reaction proceeds through S$_N$2 reaction, and S$_N$2 fashion is slightly disappeared as pressure increases.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.4
• /
• pp.159-163
• /
• 2016

Up-conversion (UC) luminescence properties of polycrystalline $Er^{3+}/Yb^{3+}$ doped $NaGd(MoO_4)_2$ phosphors synthesized by a simple solid-state reaction method were investigated in detail. Used to 980 nm excitation (InfraRed area), $Er^{3+}/Yb^{3+}$ co-doped $NaGd(MoO_4)_2$ exhibited very weak red emissions near 650 and 670 nm, and very strong green UC emissions at 540 and 550 nm corresponding to the infra 4f transitions of $Er^{3+}(^4F_{9/2},\;^2H_{11/2},\;^4S_{3/2}){\rightarrow}Er^{3+}(^4I_{15/2})$. The optimum doping concentration of $Er^{3+}$, $Yb^{3+}$ for highest emission intensity was determined by XRD and PL analysis. The $Er^{3+}/Yb^{3+}$ (10.0/10.0 mol%) co-doped $NaGd(MoO_4)_2$ phosphor sample exhibited very strong shiny green emission. A possible UC mechanism for $Er^{3+}/Yb^{3+}$ co-doped $NaGd(MoO_4)_2$ depending on the pump power dependence was discussed.

• Journal of Radiation Protection and Research
• /
• v.45 no.3
• /
• pp.101-107
• /
• 2020

Background: An important lesson learned from the Fukushima accident is that the transition to the mid- and long-term phases from the emergency-response phase requires less than a year, which is not very long. It is necessary to know how much radioactive material has been deposited in an urban area to establish mid- and long-term countermeasures after a radioactive accident. Therefore, an urban deposition model that can indicate the site-specific characteristics must be developed. Materials and Methods: In this study, the generalized urban deposition velocity and the subsequent variation in radionuclide contamination were estimated based on the characteristics of the Korean urban environment. Furthermore, the application of the obtained generalized deposition velocity in a hypothetical scenario was investigated. Results and Discussion: The generalized deposition velocities of ¹³⁷Cs, ¹⁰⁶Ru, and ¹³¹I for each residence type were obtained using three-dimensional (3D) modeling. For all residence types, the deposition velocities of ¹³¹I are greater than those of ¹⁰⁶Ru and ¹³⁷Cs. In addition, we calculated the generalized deposition velocities for each residential types. Iodine was the most deposited nuclide during initial deposition. However, the concentration of iodine in urban environment drastically decreases owing to its relatively shorter half-life than ¹⁰⁶Ru and ¹³⁷Cs. Furthermore, the amount of radioactive material deposited in nonresidential areas, especially in parks and schools, is more than that deposited in residential areas. Conclusion: In this study, the generalized urban deposition velocities and the subsequent deposition changes were estimated for the Korean urban environment. The 3D modeling was performed for each type of urban residential area, and the average deposition velocity was obtained and applied to a hypothetical accident. Based on the estimated deposition velocities, the decision-making systems can be improved for responding to radioactive contamination in urban areas. Furthermore, this study can be useful to predict the radiological dose in case of large-scale urban contamination and can support decision-making for long-term measurement after nuclear accident.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.173-173
• /
• 2010

$Bi_4Ti_3O_{12}$ ($B_4T_3$) is a unique ferroelectric material that has a relatively high dielectric constant, high Curie temperature, high breakdown strength, and large spontaneous polarization. As a result this material has been widely studied for many applications, including nonvolatile ferroelectric random memories, microelectronic mechanical systems, and nonlinear-optical devices. Several reports have appeared on the use of Mn dopants to improve the electrical properties of $B_4T_3$ thin films. Mn ions have frequently been used for this purpose in thin films and multilayer capacitors in situations where intrinsic oxygen vacancies are the major defects. However, no systematic study of the optical properties of $B_4T_3$ films has appeared to date. Here, we report optical data for these films, determined by spectroscopic ellipsometry (SE). We also report the effects of thermal annealing and Mn doping on the optical properties. The SE data were analyzed using a multilayer model that is consistent with the original sample structure, specifically surface roughness/$B_4T_3$ film/Pt/Ti/$SiO_2$/c-Si). The data are well described by the Tauc-Lorentz dispersion function, which can therefore be used to model the optical properties of these materials. Parameters for reconstructing the dielectric functions of these films are also reported. The SE data show that thermal annealing crystallizes $B_4T_3$ films, as confirmed by the appearance of $B_4T_3$ peaks in X-ray diffraction patterns. The bandgap of $B_4T_3$ red-shifts with increasing Mn concentration. We interpret this as evidence of the existence deep levels generated by the Mn transition-metal d states. These results will be useful in a number of contexts, including more detailed studies of the optical properties of these materials for engineering high-speed devices.

• Journal of the Mineralogical Society of Korea
• /
• v.19 no.2 s.48
• /
• pp.81-88
• /
• 2006

The Yttria Partially Stabilized Zirconia powder was prepared by spontaneous precipitation method using $ZrOCl_2{\cdot}8H_O-YCl_33{\cdot}6H_2O$ solution as a starting materials. The optimal experimental conditions such as concentration and pH of starting solutions, the amounts of stabilizer $Y_2O_3$ used, and sintered temperature were carefully studied. The best condition for synthesizing $ZrO_2$ was experimentally selected and applied throughout this study for the preparation of the 3 mole% $Y_2O_3$ partially stabilized zirconia, 3YSZ. The physical properties of 3YSZ was examined by XRD, Raman, DT A, and SEM. The structural transition from pure monoclinic high temperature $ZrO_2$ to tetragonal room temperature 3YSZ was made possible by the added amount of $Y_2O_3$ in the $ZrO_2+Y_2O_3$ system. All Raman Spectrum band appeared in the lower wave numbers rather than in higher wave numbers as structure changes from monoclinic to tetragonal.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.4
• /
• pp.289-293
• /
• 2013

The changes of phytoplankton community in downstream of the Nakdong River from 2002 to 2012 was investigated. Phytoplankton biomass (chlorophyll-a concentration) was gradually increased, but dominant species cell number was gradually decreased. In changes of percentage of dominant species cell number from 2002 to 2012, Diatoms was gradually decreased, but blue-green algae was gradually increased. In changes of annual percentage of dominant period, Diatoms showed high percentage from November to May, and dominant period (%) of diatoms was 56%~74% from June to September, also dominant period of diatoms was about 300 days every year. Percentage of dominant species cell number and dominant period of blue-green algae was 68%~94% and 26%~ 36% from June to September, respectively. And green-algae showed low percentage from April to September. In the transition patterns of diatoms and blue-green algae, Stephanodiscus spp. was the highest dominant species, from December to May, and Aulacoseira spp. and Fragilaria spp. were showed high dominant percentage from May to October. In the case of blue-green algae, Microcystis spp. was the highest dominant species, from May to November, also in the case of green algae, Actinastrum spp., Pediastrum spp., Micractinium spp. and Pandorina spp. were dominant species from April to September.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2009.06a
• /
• pp.84-85
• /
• 2009

New approaches for detecting, preventing and remedying environmental damage are important for protection of the environment. Procedures must be developed and implemented to reduce the amount of waste produced in chemical processes, to detect the presence and/or concentration of contaminants and decontaminate fouled environments. Contamination can be classified into three general types: airborne, surface and structural. The most dangerous type is airborne contamination, because of the opportunity for inhalation and ingestion. The second most dangerous type is surface contamination. Surface contamination can be transferred to workers by casual contact and if disturbed can easily be made airborne. The decontamination of the surface in the nuclear facilities has been widely studied with particular emphasis on small and large surfaces. The amount of wastes being produced during decommissioning of nuclear facilities is much higher than the total wastes cumulated during operation. And, the process of decommissioning has a strong possibility of personal's exposure and emission to environment of the radioactive contaminants, requiring through monitoring and estimation of radiation and radioactivity. So, it is important to monitor the radioactive contamination level of the nuclear facilities for the determination of the decontamination method, the establishment of the decommissioning planning, and the worker's safety. But it is very difficult to measure the surface contamination of the floor and wall in the highly contaminated facilities. In this study, the poly(styrene-ethyl acrylate) [poly(St-EA)] core-shell composite polymer for measurement of the radioactive contamination was synthesized by the method of emulsion polymerization. The morphology of the poly(St-EA) composite emulsion particle was core-shell structure, with polystyrene (PS)as the core and poly(ethyl acrylate) (PEA) as the shell. Core-shell polymers of styrene (St)/ethyl acrylate (EA) pair were prepared by sequential emulsion polymerization in the presence of sodium dodecyl sulfate (SOS) as an emulsifier using ammonium persulfate (APS) as an initiator. The polymer was made by impregnating organic scintillators, 2,5-diphenyloxazole (PPO) and 1,4-bis[5-phenyl-2-oxazol]benzene (POPOP). Related tests and analysis confirmed the success in synthesis of composite polymer. The products are characterized by IT-IR spectroscopy, TGA that were used, respectively, to show the structure, the thermal stability of the prepared polymer. Two-phase particles with a core-shell structure were obtained in experiments where the estimated glass transition temperature and the morphologies of emulsion particles. Radiation pollution level the detection about under using examined the beta rays. The morphology of the poly(St-EA) composite polymer synthesized by the method of emulsion polymerization was a core-shell structure, as shown in Fig. 1. Core-shell materials consist of a core structural domain covered by a shell domain. Clearly, the entire surface of PS core was covered by PEA. The inner region was a PS core and the outer region was a PEA shell. The particle size distribution showed similar in the range 350-360 nm.

• Journal of Wetlands Research
• /
• v.19 no.3
• /
• pp.359-365
• /
• 2017

Impermeable surfaces such as transportation land uses including roads and parking lots accumulate high heavy metals and particulate matters concentration especially during dry season which worsens the river water quality and distort the water circulation system during rainfall events. Recently, the government has been promoting policies to install Low Impact Development (LID) facilities such as permeable pavements or grass blocks in parking lots or pavements. However, transition of asphalt-paved surfaces to permeable pavement generated asphalt wastes which are detrimental to the environment and has cost implications due to its removal and disposal. Therefore this study was conducted to provide a method of constructing a cost-effective permeable pavement to reduce waste generation and cost. In this study, comparative analysis of the water circulation capacity and economic efficiency of the traditional construction method and new method proposed in this study through the lab-scale experiment. The proposed method was to make holes in existing asphalt pavements, layout geotextile fabric and permeable base media such as sand before compaction. After compaction, layout grass blocks on the compacted base media then layout sand in between each grass blocks before compaction. Apparently, there was no significant difference between the traditional installation method of permeable pavement and the proposed method in this study considering surface runoff, infiltrated volume, stored volume, and rainfall-runoff delay time. The proposed method in this study generated 86% less wastes compared to the traditional installation method and has 70% cost reduction considering asphalt removal and disposal. The construction method proposed in this study yielded similar performance compared to the traditional installation method and water circulation effect, but was proven to be less complicated and economical.

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.1041-1047
• /
• 1997

The influence of $\omega$-phenylalkylammonium salt on the critical micelle concentration (CMC) of SDS has been examined using the electric conductivity method. CMC of SDS exhibited the tendency to decrease with the length of alkyl group of additives. The effect of temperature on CMC of SDS in additive solutions has been observed in the range of $18^{\circ}C-50^{\circ}C$. The free energy(${\Delta}G_m^{\circ}$) for the micellization of SDS is negative and the entropy(${\Delta}S_m^{\circ}$) is a large positive value. The enthalpy(ΔHm0is positive in low temperature($18^{\circ}C$) and negative in high temperature($>25^{\circ}C$). In the prensence of organic additives, the micellization of SDS was considered as a spontaneous process and to involve a phase transition. The values of ΔGm0has shown the tendency to increase but the values of ${\Delta}S_m^{\circ}$ and ${\Delta}H_m^{\circ}$ to decrease with the length of alklyl group of additive salts. The changes in ${\Delta}\kappa$(difference of specific conductivity) with increasing mole ratio of additives in the mixed solutions indicated the formation of mixed micelles between SDS and additives. The effect of the length of alkyl chain on the micellization of SDS demonstrated the penetration of organic additives into the palisade layer of the SDS micelle.