• 전기학회논문지P
• /
• 제59권3호
• /
• pp.293-297
• /
• 2010

Next generation concentrating photovoltaic technologies could have a large-scale impact on world electricity production once they will become economically attractive and grid parity will be reached. Multi-junction solar cells will be characterised by a high value of the cell economical performance index if the cells were able to operate at high concentration level. Concentrating the sunlight by optical devices like lenses or mirrors reduces the area of expensive solar cells or modules, and, moreover, increases their efficiency. Accurate and reliable tracking is an important issue to maintain high the CPV system output power. Further, for high concentration CPV systems, the actual tracker cost is about 20% of the total CPV system cost. In this paper high-concentration is defined as systems using concentration ratios well above 100 times the one sun intensity and trackerlss CPV system studied. Using sphericalness lens and parallel MJ cell connection method were suggested and achieved experiment on a clear day in summer. Development of these high performance multi-junction CPV module promises to accelerate growth in photovoltaic power generation.

• 한국태양에너지학회 논문집
• /
• 제31권2호
• /
• pp.82-88
• /
• 2011

The artificial increase in the solar intensity incident on solar cells using lenses or mirrors can allow solar cells to generate equivalent power with a lower cost. There are two types of concentration optics for solar energy conversion. One is to use mirrors, and the other is to use Fresnel lenses. The gains that can be achieved with a Fresnel lens or a parabolic mirror are compared. The result showed the gains are comparable and the two configurations were developed competitively. In application areas of Fresnel lenses as solar concentrators, several variations of design were devised and tested. Some PV systems still use commercially available flat Fresnel lenses as concentrators. A convex linear Fresnel lens to improve the concentration ratio and the efficiency is devised and flat linear Fresnel lens in thermal energy collection is utilized. In this study, we designed and optimized flat Fresnel lens and the 'light pipe' to develop 500X concentrated solar PV system. In the process, we compare the transmission efficiencies according to groove types. We performed rigorous ray tracing simulation of the flat Fresnel lenses. The computer aided simulation showed the 'grooves in case' has the better efficiency than that of 'grooves out case'. Based on the ray-trace results we designed and manufactured sample Fresnel lenses. The optical performance were measured and compared with ray-trace results. Finally, the optical efficiency was measured to be above 75%. All the design and manufacturing were performed based on that InGaP/InGaAs/Ge triple junction solar cell is used to convert the photon energy to electrical power. Field test will be made and analyzed in the near future.

• 전기의세계
• /
• 제30권10호
• /
• pp.655-661
• /
• 1981

The concentrating solar module with high concentration ratio(320)has been studied.in this paper. The solar module was composed of the EMVJ solar cell, (Fresnel Lens-DCPC)concentrator and heat sink, and was measured by using the PASTF system. The experimental result and the result analysis for the individual item of the module were as f ollows; (1) The conversion efficiency of the module was 8.3%. (2) The optical efficiency of the concentrator was 46.5% (DCPC; 84.8%, Fresnel Lens; 54.8%). (3) The thermal loss of the solar cell was 4.9%. And methods for the further improvement of the concentrating solar module efficiency have been suggested.

• Bulletin of the Korean Chemical Society
• /
• 제17권8호
• /
• pp.682-685
• /
• 1996

Photothermal properties depend on the characteristics of energy transfer processes in solution. In this study, a time-resolved single beam thermal lens experiment in various solvents is employed to investigate the energy coupling effects which govern the energy transfer processes. Interestingly, it is observed that the behaviour of the photothermal propagation in solution depends on the property of solution and the concentration of solute in a single beam thermal lens configuration. These characteristics lead us to consider the solute-solvent coupling effects as well as the solvent-solvent interactions.

• Archives of Pharmacal Research
• /
• 제11권4호
• /
• pp.308-311
• /
• 1988

Nine coumarin dervatives were examined for thier inhibitory effects on bovine lens aldose reductase activity (bovine-LAR). More than 50% inhibition of BLAR activities was observed in the cases of treatments with decursin, decursinol, esculin, isoimperatorin, oxypeucedanine and isobergapten at the concentration of $10^{-4}$M. Especially, BLAR activity was completely inhibited by the treatment of decursin and decursinol at this concentration. At $10^{-5}$ M, only three coumarins-decursin, decursinol and isoimperatorin, were found to have still relatively higher inhibitory effect.

• Journal of Industrial and Engineering Chemistry
• /
• 제67권
• /
• pp.236-243
• /
• 2018

A series of $Er^{3+}/Yb^{3+}$ co-doped fluorophosphate glasses with varying $YbF_3$ concentration were prepared by a high temperature melt quenching technique. Absorption and emission cross-sections were determined by using the McCumber theory. The larger emission cross-section ($9.86{\times}10^{-21}cm^2$) and longer fluorescence lifetime (12.37 ms) were obtained for the $^4I_{13/2}{\rightarrow}^4I_{15/2}$ transition of ABS3Er4Yb glass. The sensitivity and temperature of the maximum sensitivity were evaluated by the fluorescence intensity ratio method from the measured upconversion spectra. The results were discussed and compared to the other reported glasses.

• 한국안광학회지
• /
• 제7권2호
• /
• pp.129-134
• /
• 2002

무코팅 CR-39 안경렌즈를 brown, green, blue 계열의 색으로 시간별로 착색하여 착색농도에 따른 UV차단효과를 관찰하였다. CR-39 안경렌즈의 착색농도에 따른 UV 스펙트럼은 먼저 분광광도계(spectrophotometer)로 분석하였고, 그 후 시중에서 많이 사용하는 400nm UV 차단 측정기의 투과수치와 비교하였다. 그 결과 착색 농도가 짙어짐에 따라 UV 차단 효과가 점점 증가하였고, 분광광도계의 UV 스펙트럼에서 400nm 기준 UV 투과률이 약 5% 미만의 경우에는 시중에서 많이 사용하는 400nm UV 차단 측정기의 투과수치에서는 0%로 됨을 확인했다.

• 한국안광학회지
• /
• 제11권1호
• /
• pp.27-34
• /
• 2006

본 논문에서는 RGP 렌즈에 부착된 누액 성분의 세척효과 및 RGP 렌즈의 습윤성 유지에 대한 RGP 렌즈 관리용액, 소프트콘택트렌즈(SCL) 관리용액, RGP 렌즈-SCL 겸용관리용액 및 생리식염수의 작용의 차이를 알아 보았다. 단백질 세척력을 알아보기 위해 Lowry protein assay와 주사현미경 관찰을 하였으며, 지질 세척력을 알아보기 위해 High Pressure Liquid Chromatology(HPLC)를 사용하였고, 습윤성은 water-in-air 방법으로 접촉각을 측정하여 알아 보았다. RGP 렌즈관리용액으로 RGP 렌즈를 세척 및 보관하였을 때 부착된 단백질의 62%가 제거되었으며, 이러한 단백질 부착물 세척력은 생리식염수나 겸용 관리용액에 비해 약 4배 우수한 것일 뿐만 아니라 SCL 관리용액에 비해 2배 우수한 것이었다. 이러한 결과는 소프트 콘택트렌즈에서의 SCL 관리용액의 단백질 세척력이 가장 우수하다는 것과 상이한 결과로, 세척 효과가 단순히 계면활성제의 활성만의 차이에 의해 나타나는 것은 아니며 RGP 렌즈 관리용액에 들어있는 점성증가제와 같은 성분들이 RGP 렌즈와 용액의 접촉을 증가시켜 세척효과가 강화되는 것과 같이 다른 요인들이 작용하여 나타나는 결과로 여겨진다. RGP 렌즈에 부착되어 있는 지질 또한 RGP 렌즈 관리용액이 가장 우수한 지질세척 효과를 가져 렌즈에 잔존하는 cholesterol의 양이 50%로 감소하였다. RGP 렌즈의 편안한 착용감을 위한 중요한 평가 지료인 렌즈 표면의 습윤성은 RGP 렌즈 관리용액에 의해 가장잘 유지되었다. 겸용 관리용액의 경우 세척력 및 습윤성 유지력이 모두 RGP 렌즈 용액에 못 미쳤다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 춘계학술대회
• /
• pp.223-225
• /
• 1996

Poly (ethylene glycol) (PEG)macromers terminated with acrylate groups and interpenetrating polymer networks(IPN) composed of poly(hydroxyethyl methacrylate)(PHEMA) or poly(hydroxyethyl methacrylate-co-hydropropyl methacrylate-co-N-vinyl pyrrolidone) [P(HEMA-co-HPMA-co-NVP)] and PEG macromer were synthesized with the aim of obtaining protein adsorption resisatnt soft contact lens. Polymerization of PEG macromer resulted in the formation of cross-linked gels due to the multifunctionality of macromer. Crosslinked P(HEMA) or P(HEMA-co-HPMA-co-NVP) chains were interpenetrated into the cross-linked three-dimensional networks of PEG. It was found that albumin adsorption onto the contact lens prepared by P(HWMA)/PEG IPN decreases with a decrease of molecular weight of PEG whereas its adsorption onto the contact lens prepared by P(HEMA-co-HPMA-co-NVP)/PEG IPN decreases with an increase of molecular weight of PEG. Also, it was found that albumin adsorption onto the both contact lens decreases with an increase of concentration of PEG macromer in the IPN preparation. There are also more adequate in the bioinertness and bioadhesion for the contact lens by P(HEMA)/PEG IPN or P(HEMA-co-HPMA-co-NVP)/PEG IPN than that by P(HEMA) or P(HEMA-co-HPMA-co-NVP).

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 학술대회 논문집
• /
• pp.145-150
• /
• 2004

The LED lighting used spot-light illuminate the limited surface. So it is a key-point to condense wide emission angle of high power light emitting diodes (LEDs) to narrow that angle. In this paper, the secondary optics was designed by lens-makers formula for concentration rays of LED into specific region. So, it simulated the optics that designed by lens makers-formula in the optical design program, LightTools. And then, show the p propriety of lens design utilizing simulation result, luminous intensity, emission angle.