• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1714-1719
• /
• 2003

Antilock Brake System (ABS) is indispensable safety equipment for vehicles today. In order to develop new ABS ECU suitable for pneumatic brake system of a bus, a Hardware In-the-Loop Simulation (HILS) System was developed. In this HILS, the pneumatic brake system of a bus and antilock brake component were used as hardware. For the computer simulation, the 14-Degree of Freedom (DOF) bus dynamic model was constructed using the Matlab/Simulink software package. This model was compiled and downloaded in the simulation board, where the Power PC processor was used for real-time simulation. Additional commercial package, the ControlDesk was used to monitor the dynamic simulation results and physical signal values. This paper will focus on the procedure and results of evaluating the ECU in the HILS simulation. Two representative cases, wet basalt road and $split-{\mu}$ road, were used to simulate real road conditions. At each simulated road, the vehicle was driven and stopped under the help of the developed ECU. In each simulation, the dynamical behavior of the vehicle was monitored. After enough tests in the laboratory using HILS, the parameter-tuned ECU was equipped in a real bus, which was driven and stopped in the real test field in Korea. And finally, the experiment results of ABS equipped vehicle's dynamic behavior both in HILS test and in test fields were compared.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.5
• /
• pp.25-33
• /
• 2013

All-wheel steering (AWS) system is applied to articulated vehicles to reduce turning radius. The swing-out suppression algorithm is applied to AWS ECU, a key component of AWS system. The swing-out suppression algorithm applied to AWS ECU has a problem when velocity of vehicle is changed. In this paper, new algorithm based on moving distance that solve velocity problem is proposed. The HILS simulation and the test articulated bus is used to validate algorithm.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.6
• /
• pp.68-75
• /
• 2011

A vehicle fuel economy is very important issue in view of fuel cost and environmental regulation. It has been improved according to the performance improvement of the vehicle engine, power train and many components. It was evaluated at given mode (LA-4, FTP-75, etc) on an engine dynamometer or computer simulation program. In this paper, the fuel economy improvement cruise control algorithms as controling a vehicle velocity by road load calculated and predicted in a real expressway with gradient was studied. Firstly, the altitude and distance data which was measured with GPS sensor was already installed in the ECU of a vehicle. Then the vehicle equipped with GPS receiver is driven the same expressway. The ECU calculates the gradient angle and the in-/decreasing velocity using the gradient angle by comparing the current received distance and altitude data from GPS with the saved data ahead of the vehicle. Therefore the ECU can calculate and predict the vehicle velocity considering tolerance velocity of next position with running. Then the ECU controls the vehicle velocity to meet this predicted velocity in all section. Three cruise control algorithms with the different velocity profiles for the improvement of fuel economy are proposed and compared with the computer simulation results that the vehicle runs on Youngdong expressway. The proposed CVELCONT2 and CVELCONT3 algorithms were improved 3.7% and 4.8% of fuel economy compared with CONSTVEL which is steady cruising algorithm. These two algorithms are recommended as the Eco-cruise drive methodologies in this paper.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.6
• /
• pp.311-318
• /
• 2016

Recent vehicles are using car internal network for various purposes such as vehicle control, diagnostic functions, and ECU program upgrade. Currently CAN and FlexRay are the most representative networks. In the next-generation network, the use of CAN FD and car ethernet is actively studied. In this paper, we aimed to compare and evaluate the diagnostic function and the program of the ECU from the upgrade view on characteristics related to download time for each network when CAN, CAN FD, and FlexRay network are applied. As a result of the simulation, it was possible to determine that the CAN FD network is currently the most suitable for the next-generation network by suppressing other networks in terms of cost performance even under conditions of 500 Kbps and 2 Mbps which are practically usable speeds.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2024.01a
• /
• pp.279-280
• /
• 2024

본 논문에서는 주행 중 차량의 상태를 실시간으로 모니터링함과 동시에, 페달 조작 여부를 확인할 수 있는 영상 촬영 및 저장 시스템을 제안한다. 개발된 차량 운행 정보 블랙박스는 블루투스 OBD2 커넥터를 통해 차량의 PID 값을 식별하고 수집한다. 이 데이터는 비동기 방식으로 처리되며, 라즈베리파이와 7인치 터치 디스플레이를 이용해 운전자에게 한눈에 보일 수 있는 형태로 정보를 제공한다. 특히, 멀티스레드를 활용하여 ECU 정보를 페달 조작 여부 영상에 표시하는 동시에 녹화하고, CSV 파일로 SD 카드에 실시간으로 저장한다. 수집된 차량 데이터와 영상 데이터는 예기치 못한 사고 발생 시 운전자의 과실 비율 측정과 대처행동을 입증하는 데 중요한 역할을 할 것으로 기대되며, 차량 정비 시 참고 자료로 활용될 수 있다.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05a
• /
• pp.441-443
• /
• 2011

OSEK COM은 OSEK/VDX에서 제안한 자동차 ECU의 태스크 간 통신 규약이다. 본 논문에서는 OSEK COM의 규약을 준수하는 내부 통신을 위한 메시지 송수신 메커니즘을 제시한다. 제시한 메커니즘의 타당성을 검토하기 위하여 ARM 프로세서가 탑재된 EZ-AT7에서 태스크 간의 정상적인 내부 통신 동작 상태를 확인하였다.

• Annual Conference of KIPS
• /
• 2010.11a
• /
• pp.1526-1528
• /
• 2010

OSEK/VDX OS 는 자동차 전자 제어 장치(ECU)를 위하여 OSEK/VDX 에서 제안한 사양을 준수하는 실시간 운영체제이다. 시스템 생성기는 OIL 언어로 작성된 파일을 C 언어의 중간 코드 파일로 변환하기 위한 도구로써 OSEK/VDX OS 개발에 필요한 요소이다. 본 연구에서는 OSEK/VDX OS 개발에 필요한 시스템 생성기를 보다 쉽게 구현할 수 있는 기법을 제시하였다.

• Annual Conference of KIPS
• /
• 2010.04a
• /
• pp.18-21
• /
• 2010

OSEK/VDX 운영체제는 자동차 전자제어장치(ECU)를 위하여 OSEK/VDX에서 제안한 사양을 준수하는 실시간 운영체제이다. 본 논문에서는 OSEK/VDX 운영체제의 Event 관리 메커니즘에 대한 전반적인 설명과 이를 지원하기 위한 4가지의 서비스 함수를 설계하고 구현하였다.

• Journal of ILASS-Korea
• /
• v.19 no.2
• /
• pp.64-68
• /
• 2014

A driving vehicle performance which is driven by FTP-75 mode was simulated by computer. Throttle valve position, engine speed, air mass flow rate, fuel consumption et al. were computer simulated. A set of engine part load performance data, automatic transmission shift map and vehicle specifications were used for the computer simulation. Throttle valve position, engine speed, air mass flow rate et al. measured for evaluating the computer simulation results by driving the vehicle with FTP-75 mode on a chassis dynamometer. GT-Power$^{(R)}$ software was used for the computer simulation of the driving vehicle performance. Experimental fuel consumption rate was measured by using an ECU HILS fuel injection system. The experimental data and simulation results were compared. The computer simulation of the driving vehicle performance predicts the measured data well comparatively.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.6
• /
• pp.127-135
• /
• 2017

Recently, the most brand new vehicles contain a lot of ECU for comfortable and safety driving environments. For efficient communication network among ECUs, almost car manufactures use CAN protocol which enables to decrease the number of communication lines dramatically and ensures higher data transmission reliability. However, CAN dose not ensure authentication of CAN data frame. So it is vulnerable to replay-attack on CAN data frame. This paper proposes the practical message authentication technique for In-vehicle CAN. To transmit data and MAC together, it is very useful to use the short length of MAC after considering limited space of CAN data frame. However to ensure safety of MAC, additional technique is required. We suggested a message authentication technique that can be usefully applied to build a safety network inside the vehicle because it considers limited data payload of CAN.