• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1051-1059
• /
• 2008

In the development process of an ECU (Electrical Control Unit), numerous tests are necessary to evaluate the performance and control algorithm. The vehicle based test is expensive and requires long time. Also, it is difficult to guarantee the safety of the test driver. To overcome the various problems faced in the development process, the ECU test has been done using HIL (Hardware In the Loop). The HIL environment has the actual hardware including an ECU and a virtual vehicle model. In this paper, the test platform environment is devloped for the AWS ECU black box test. The test platform is built on HIL (Hardware In the Loop) architecture. Using the developed test platform, the control algorithm of the AWS ECU can be evaluated under the virtual driving condition of the bi-modal tram. Driving conditions, such as a front steering angle and vehicle velocity, are defined through the PC (Personal Computer) input. Input signals are transformed to electrical signals in the PC. These signals become the input conditions of the AWS ECU. The AWS ECU is stimulated by arbitory input conditons, and responses of the system are observed.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.138-142
• /
• 2004

In this paper, we present a new method for monitoring of ECU's sensor signals of vehicle. In order to measure the ECU's sensor signals, the interfaced circuit is designed to communicate ECU and the Embedded Linux is used to monitor communication result through Web the Embedded Linux system and this system is said "ECU Interface Part". In ECU Interface Part the interface circuit is designed to match voltage level between ECU and SA-1110 micro controller and interface circuit to communicate ECU according to the ISO, SAE communication protocol standard. Because Embedded Linux does not allow to access hardware directly in application level, anyone who wants to modify any low level hardware must develop device driver. To monitor ECU's sensor signals the most important thing is to match serial level between ECU and ECU Interface Part. It means to communicate correctly between two hardware we need to match voltage and signal level, and need to match baudrate. The voltage of SA-1110 is 0 ${\sim}$ +3.3V and ECU is 0 ${\sim}$ +12V and, ECU's communication Line K does multiple operation so, the interface circuit is used to match voltage and signal level. In Addition to ECU's baudrate is 10400bps, it's not standard baudrate in computer environment. So, we need to develop a device driver to control the interface circuit, and change baudrate. To monitor ECU's sensor signals through web there's a network socket program is working in Embedded Linux. It works as server program and manages user's connections and commands. Anyone who wants to monitor ECU's sensor signals he just only connect to Embedded Linux system with web browser then, Embedded Linux webserver will return the ActiveX webbased measurement software. It works in web browser and inits ECU, as a result it returns sensor signals through web. All the programs are developed with GCC(GNU C Compiler) and, webbased measurement software is developed with Borland C++ Builder.

• Annual Conference of KIPS
• /
• 2010.04a
• /
• pp.10-13
• /
• 2010

저상 굴절 차량에는 전차륜 시스템이 요구되며, AWS ECU는 전차륜 시스템의 핵심적인 역할을 하는 전자 제어 장치이다. 실제 차량 주행을 위해서는 차량에 따른 ECU의 설정 값 변경이 필요하며, 현재 ECU의 동작 상태를 점검할 수 있는 기능이 요구된다. 이러한 기능을 수행하기 위하여 ECU에 서비스 루틴을 추가하고, 진단 프로그램을 개발하여 성능을 평가하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.231-234
• /
• 2001

OBD-II regulations are already effective in many countries. The California Air Resources Board(CARB) first issued regulations in 1985 for the 1988 model year, known as OBD-I, and required the vehicle's engine management computer to warn the driver by means of a dash-mounted light if a malfunction occurred in either the oxygen sensor, the exhaust gas recirculation(EGR) valve or the evaporative emission system purge solenoid, and to store information on troubles that have no recurrent characteristics. This paper presents two methods of wireless monitoring OBD signal, which is one of the ECU output for self diagnostic measurement. RF module is used to monitor ECU's Self diagnostic signal remotely. Two kinds of measurement systems which are based on micro-controller(80C196KC) for portable detection and PC for sever are considered for receiving the RF signal. Therefore, possibility of real-time monitoring of ECU's self diagnostic signal remotely is verified on this paper.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.12
• /
• pp.1959-1968
• /
• 2016

The recent automobiles, a number of ECU inside the vehicle has been used. Also, each ECU is connected to different types of networks in accordance with the characteristics. Therefore, efficient data exchange between discrete network has emerged as a very important element. The gateway is responsible for the ability to exchange data between discrete network. In this study, we propose the new gateway algorithm to provide the structure of the mapping table to improve the efficiency of data exchange between discrete network. Also it provides a structure of a new gateway algorithm with a function of adjusting the priority of the data to be transmitted to another network arbitrarily. Moreover, the proposed gateway structure may simultaneously convert the transmission data input from a particular network to multiple networks. Another advantage is easy to change the entire data structure only if we change the table structure in the gateway.

• Annual Conference of KIPS
• /
• 2011.11a
• /
• pp.21-23
• /
• 2011

OSEK/VDX COM은 자동차 ECU의 통신을 위해 OSEK/VDX에서 제안한 통신 규약이다. 본 논문에서는 OSEK/VDX COM의 내부 통신 메커니즘을 설계한다. 설계한 메커니즘의 타당성을 검증하기 위해 ARM7 프로세서가 장착된 임베디드 개발 보드 EZ-AT7를 이용하여 ECU 내부의 태스크간의 통신의 정상적인 동작을 확인 하였다.

• Journal of ILASS-Korea
• /
• v.21 no.1
• /
• pp.1-6
• /
• 2016

A gasoline injector rig which can measure cumulative injected fuel mass under a vehicle driving condition was developed. The measurement system consists of an engine control unit (ECU), data acquisition (DAQ) and injected fuel collection system using loadcells. By supplying reconstructed sensor signals which simulate the real vehicle's sensor signals to the ECU, the ECU drives injectors as if they were driven in the vehicle. The vehicle's performance was computer simulated by using $GT-Suite^{(R)}$ software based on both engine part load performance and automatic transmission shift map. Throttle valve position, engine and vehicle speed, air mass flow rate et al. were computer simulated. The used vehicle driving pattern for the simulation was FTP-75 mode. For reconstructing the real vehicle sensor signals which are correspondent to the $GT-Suite^{(R)}$ simulated vehicle's performance, the DAQ systems were used. The injected fuel was collected with mess cylinders. The collected fuel mass in the mess cylinder with elapsed time after starting FTP-75 driving mode was measured using loadcells. The developed method shows highly improved performance in fast timing and accuracy of the cumulative injected fuel mass measurement under the vehicle driven condition.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.90-93
• /
• 2009

Recently, CAN(Controller Area Network) being used in vehicle network system is suitable Network Protocol for smart vehicles with a future that need many ECUs, and it guarantees stability and reliability. It is revealed that being equipped many ECU could reduce the increasing of energy consumption and energy cost from the increasing of Wiring Harness's space and weight. In this paper, future smart vehicle control Air conditioner and heater for convenient and comfortable driving as using CAN protocol and implement auto control system According to driver's requirement using temperature in the vehicle.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.9
• /
• pp.21-31
• /
• 2013

ECU(Electric Control Unit) on the important features of the vehicle is equipped, ECU between sending and receiving messages is connected to one of the internal network(CAN BUS), but this network easily accessible from the outside and not intended to be able to receive attacks from an attacker, In this regard, the development of tools that can be used in order to verify the possibility of attacks on attacks from outside, However, the time costs incurred for developing tools and time to analyze from actual car for CAN messages to be used in the attack to find. In this paper, we want to solve it, propose a method to generate test cases required for the attack is publicly available tool called Sulley and it explains how to find the CAN messages to be used in the attack. Sulley add the CAN messages data generated library files in provided library file and than Sulley execute that make define and execute file conform to the CAN communication preferences and create message rules. Experiments performed by the proposed methodology is applied to the actual car and result, test cases generated by the CAN messages fuzzing through Sulley send in the car and as a result without a separate tool developed was operating the car.

• Journal of Convergence for Information Technology
• /
• v.9 no.7
• /
• pp.25-32
• /
• 2019

This paper proposes the method of an in-vehicle gateway to reduce the reprogramming time for the ECU (Electronic Control Unit). In order to reduce the reprogramming time, the gateway must prohibit transmitting messages, that are not related to reprogramming, to the destination CAN network, and no ECU should diagnose the DTC(Diagnostic Trouble Code) that indicates CAN communication error caused by prohibiting CAN messages by the gateway. Moreover, STmin, which are the minimum time between two consecutive CAN messages, should be minimized. In order to do this, this paper proposes the method that uses the link control command specified in UDS(Unified Diagnostic Services) and hardware based gateway functionality that are supported by the latest MCU(Micro Controller Unit). The proposed method is developed using TC275 based embedded system, and its results are presented.