• Journal of IKEEE
• /
• v.18 no.3
• /
• pp.392-397
• /
• 2014

In this paper, we propose a memory operation system architecture for memory latency penalty reduction in SIMT architecture based stream processor. The proposed architecture applied non-blocking cache architecture to reduce cache miss penalty generated by blocking cache architecture. We verified that the proposed memory operation architecture improve the performance of the stream processor by comparing processing performances of various algorithms. We measured the performance improvement rate that was improved in accordance with the ratio of memory instruction in each algorithm. As a result, we confirmed that the performance of stream processor improves up to minimum 8.2% and maximum 46.5%.

• Journal of Korea Multimedia Society
• /
• v.23 no.9
• /
• pp.1171-1180
• /
• 2020

The number of the PV systems installed in south korea has been gradually increasing. Interest of operation & management of PV System is rising up as PV System installation trends to increase. The vital function of operation & management is the monitoring system. Most monitoring systems are only available for equipment of suppliers and manufacturers. In this study, a monitoring system was implemented to support multi-domain equipment (inverter, junction box, water distribution board, environmental sensors) that are not limited to specific manufacturers. Monitoring system includes a visualization function, which makes it easy for users to check the power generation and the operation status of the equipment of PV System. In the future, this monitoring system will be utilized as an operation & maintenance foundation element in the PV system industry.

• Journal of information and communication convergence engineering
• /
• v.9 no.4
• /
• pp.435-440
• /
• 2011

This paper propose the method of constructing the highly efficiency adder and multiplier systems over finite fields. The addition arithmetic operation over finite field is simple comparatively because that addition arithmetic operation is analyzed by each digit modP summation independently. But in case of multiplication arithmetic operation, we generate maximum k=2m-2 degree of ${\alpha}^k$ terms, therefore we decrease k into m-1 degree using irreducible primitive polynomial. We propose two method of control signal generation for the purpose of performing above decrease process. One method is the combinational logic expression and the other method is universal signal generation. The proposed method of constructing the highly adder/multiplier systems is as following. First of all, we obtain algorithms for addition and multiplication arithmetic operation based on the mathematical properties over finite fields, next we construct basic cell of A-cell and M-cell using T-gate and modP cyclic gate. Finally we construct adder module and multiplier module over finite fields after synthesizing ${\alpha}^k$ generation module and control signal CSt generation module with A-cell and M-cell. Next, we constructing the arithmetic operation unit over finite fields. Then, we propose the future research and prospects.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.880-884
• /
• 2002

According to the development of computer technology, especially in 3D graphics and visualization, the interest for 3D GIS has been increasing. Several commercial GIS softwares are ready to provide 3D function in their traditional 2D GIS. However, most of these systems are focused on visualization of 3D objects and supports few analysis functions. Therefore in this paper, we design not only a spatial operation processor which can support spatial analysis functions as well as 3D visualization, but also implement a prototype to operate them. In order to support interoperability between the existing models, the proposed spatial operation processor supports the 3D spatial operations based on 3D geometry object model which is designed to extend 2D geometry model of OGIS consortium, and supports index based on R$^*$-Tree. The proposed spatial operation processor can be applied in 3D GIS to support 3D analysis functions.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2001.10a
• /
• pp.91-91
• /
• 2001

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.11
• /
• pp.3020-3033
• /
• 1999

Role-Based Access Control(RBAC) security policy is being widely accepted not only as an access control policy for information security but as both a natural modeling tool for management structure of organizations and flexible permission management framework in various commercial environments. Important functions provided by the current RBAC model are to administrate the information on the components of RBAC model and determine whether user's access request to information is granted or not, and most researches on RBAC are for defining the model itself, describing it in formal method and other important properties such as separation of duty. As the current RBAC model which does not define the definition, design and operation for applications is not suitable for automated information systems that consist of various applications, it is needed that how applications should be designed and then executed based on RBAC security model. In this paper, we describe dynamic properties of session which is taken for a passive entity only activated by users, as a vehicle for building and executing applications in an automated information systems. And, a framework for session-oriented separation of duty property, application design and operation is also presented.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.6
• /
• pp.2861-2880
• /
• 2018

Mobile Ad hoc Networks (MANETs) have become a viable platform owing to their potential of providing communication without any pre-existing infrastructure and central administrating authority. Mutual support and co-operation among nodes are prerequisites for performing functions in such networks. The scarcity of resources makes it economical for nodes to conserve their resources and misbehave by avoiding participation in the network. Therefore, a mechanism is required to detect and handle such misbehaving nodes and promote co-operation in the network. Existing techniques for handling misbehaving nodes focus only on their current behaviour without considering the antecedent behaviour of nodes. In real world, a node may dynamically change its behaviour in accordance to its requirements. Hence, an efficient mechanism is required for providing security against such misbehaviour. This paper proposes an Adaptive Security Model which contemplates the present as well as anterior behaviour of nodes for providing security against dynamic node behaviour. The adaptivity of the model is nested in its ability to requite well-behaving nodes and penalize misbehaving ones in conformity with their overall behaviour. Simulation results indicate the efficiency of proposed scheme in securing the network from the menace of dynamic behaviour of nodes.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.27 no.1
• /
• pp.1-8
• /
• 2004

This study intend to make easy modification, even if there is a new job or structure change, by modularizing program and computerize and automation of production control management used in CIM. under the condition where manager control production on the job-site, for increasing connection with other operation and management on the computer by monitoring center computer, recognizing information by computer is needed, it is possible by converting transaction. So this study goal is to make delivery control and order control fast and accurate by finding dynamic history of machine and production information in enterprise without input production and quality information by themselves with quality information system. So production increase and quality improvement are possible by diminishing manager's and producer's work with the result of the study combining POP and CIM, after that, in e-business and m-business period that every enterprise must pass, customer satisfaction and sales promotion are possible with employee's computerizing minds. these study result also can knowledge process condition with theoretical class and have a power in finding a solution with foundation of theoretical knowledge.

• Journal of Korean Society of Water and Wastewater
• /
• v.34 no.2
• /
• pp.105-114
• /
• 2020

In this study, based on the System Dynamics (SD) methodology, the interrelationship between the factors inherent in the operation of the New Technology Certification System (NTCS) in Korea was identified by a causal map containing a feedback loop mechanism in connection with 'new technology development investment', 'commercialization of new technology', and 'sales by new technology'. This conceptualized causal map was applied to the simulation of the operations of the New Excellent Technology and Environmental Technology Verification System (NET&ETV) run by the Ministry of Environment among various NTCSs in Korea. A SD computer simulation model was developed to analyze and predict the operational performance of the NET&ETV in terms of key performance indices such as 'sales by new technology'. Using this model, we predicted the future operational status the NET&ETV and found a policy leverage that greatly influences the operation of the NET&ETV. Also the sensitivity of the key indicators to changes in the external variables in the model was analyzed to find policy leverage.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.6
• /
• pp.2247-2255
• /
• 2017

Because the on-board charger (OBC) is installed in electric vehicles (EVs), high power density is regarded as a key technology. Among components of the OBC, inductors occupy more than 30% of the total volume. Thus, it is important to reduce the volume and the weight of inductors while maintaining thermal stability. Discontinuous conduction mode (DCM) can satisfy these requirements; however, only a few studies have adopted the DCM operation for OBCs because of the large inductor current ripple. In this paper, a design process is proposed for application of the DCM operation to OBCs. In order to analyze the inductor losses accurately, a numerical formula for the inductor current ripple is deduced based on a detailed analysis. Two inductors are fabricated using several ferrite cores and powder cores taking into consideration the inductor size, inductor losses, and temperature rise. In order to verify the analysis and design process, experimental results are presented that show that the designed inductors satisfy the requirements of the OBCs.