• Korean Institute of Interior Design Journal
• /
• no.9
• /
• pp.24-29
• /
• 1996

The objectives of this study is to create an environment which students could apply effectively through focused on the innovative methods of education and CAD course contents. The facts which were able to figure out from this study were as follows ; 1. After the analysis of the CAD course contents of the american universities, their common contents were in order of introduce to Computer Aided Drafting and design with Auto CAD/ provide fundamental knowledge of the application for use in design/ examine and how this effects 2 D image and model creation/ CAD as a design tool . Over all trend of CAD course contents of interior design program in american university is moving toward utilizing CAD as a design tool. 2. On the other hand, common contents of our local universities were simply introducing CAD. It means that our course contents are more methodological and theoreatical . And american university's program is focused on problem solving solution as a design tool.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.1
• /
• pp.1218-1225
• /
• 2001

This paper presents a design procedure for the supervisory controller(SC) of the high-speed train car. The proposed SC manages control logic and scenario of the overall train system, and monitors input/output signals among the sub-controllers in the system, The roles and functions of each sub-control system are defined, and the interfaces among the control systems are developed. Train control system is modeled with automata, and the model is implemented into a program using a computer-aided software engineering(CASE) tool, Object GEODE, The designed SC is verified and evaluated by using simulation. The SC is shown to successfully perform the designed functions without any errors.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.6
• /
• pp.39-47
• /
• 2008

In this research, a web-based design support system is constructed for the design process of automotive steel pulley to gather engineering knowledge from pulley design data. In the design search module, a clustering tool for design data is proposed using K-means clustering algorithm. To obtain correlational patterns between design and FEA (Finite Element Analysis) data, a Multi-layer Back Propagation Network (MBPN) is applied. With the analyzed patterns from a number of simulation data, an estimation of minimum von mises can be provided for given design parameters of pulleys. The case study revealed fast estimation of minimum stress in the pulley within 12% error.

• 한국기계연구소 소보
• /
• s.17
• /
• pp.69-74
• /
• 1987

This paper introduces a case-building algorithm which can determine automatically a desired design case by categorizing known-variables and unknown-variables among design variables. Common CAD programs use a case-selection technique, where a programmer sets initially a few of design cases and then users can only choose one of the given cases. The case-building technique is a powerful tool for the expert computer-aided design technology.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.8
• /
• pp.40-51
• /
• 1996

This paper describes some research works of computer-aided design of blanking and piercing progressive die for stator and rotor parts. An approach to the system is based on knowledge based rules. The deveolped system is composed of six modules such as main program, input and shape treatment, production feasibility check, strip layout, die layout and drawing edit module. Using this system, design parameters ( geometric shapes, die and punch dimensions and dimensions of tool elements) are determined and output is gen- erated in graphic from. Knowledges for tool design are extracted from the plasticity theories, handbooks, relevant references and empirical know-hows of experts in blkanking companies. The developed system provides powerful capabilities for process planning and die design of stator and rotor parts.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.12
• /
• pp.3435-3446
• /
• 1999

The application of Computer Aided Design (CAD) tool to rehabilitative surgery of the hand is a new field of endeavor. It is considered that there are currently no existing systems designed to assist the orthopedic surgeon in planning complex procedures such as tendon transfer operations. Most tendon transfer operations are performed by surgeons on the basis of knowledge and experience gained through years of practice. However, with the help of this computer graphics-based CAD tool for planning tendon paths, the planning and the evaluation for the best operation on patients' hands also may be possible. The purpose of this study was to model kinematically the structure of the hand and design a prototype tendon path planning tool with a standard computer graphics library, in order for surgeons to perform tendon transfer surgery more objectively and quantitatively.

• Korean Journal of Computational Design and Engineering
• /
• v.9 no.1
• /
• pp.77-91
• /
• 2004

Integrating computer-aided design with computer-aided fabrication and construction will fundamentally redefine the relationship between design and construction. Rapid prototyping(RP) is evaluated as one of the integration method available but it has been regarded as very expensive and complex design evaluation tool and is only suitable for large mechanical design shops in automobile and aerospace industry. However current status of rapid prototyping is changing since the new generation of RP equipment, less expensive and more user-friendlier, now can be installed and use in design firms. Simultaneously increasing use of 3D CAAD software is also helping to use rapid prototyping widely. It is crucial to acknowledge rapid prototyping technologies are not only for avant-garde architect such as Frank O. Gehry but ordinary 90% architects, who can have benefit from fast and cost-effective technology. With its fast development and adaptation in architectural industry, it is quite necessary to include rapid prototyping education in regular CAAD courses either undergraduate or graduate level.

• Computers and Concrete
• /
• v.4 no.4
• /
• pp.259-272
• /
• 2007

A method based on the lower-bound theorem of limit analysis is presented for the capacity assessment of nodal zones in strut-and-tie models. The idealized geometry of the nodal zones is formed by the intersection of effective widths of the framing struts and ties. The stress distribution is estimated by dividing the nodal zones into constant stress triangles separated by lines of stress discontinuity. The strength adequacy is verified by comparing the biaxial stress field in each triangle with the corresponding failure criteria. The approach has been implemented in a computer-based strut-and-tie tool called CAST (Computer-Aided Strut-and-Tie). An application example is also presented to illustrate the approach.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.6
• /
• pp.19-25
• /
• 2019

We have developed a tool that uses finite element analysis (FEA) to rapidly evaluate a shaft-bearing system of machine tools. We extracted commercial data on suitable clamping units and defined the inner profile of the shaft to avoid needing direct user input to define the profile. We use a splitting algorithm to convert the shaft into beam elements with two diameters and length. To validate the tool, we used it to design and evaluate a shaft-bearing system and found that our tool automated the construction of an FE system model in a commercial FEA package as well as the static stiffness evaluation; both tasks were completed in seconds, demonstrating a significant reduction from the minutes normally required to complete these tasks manually.

• Korean Institute of Interior Design Journal
• /
• no.12
• /
• pp.40-49
• /
• 1997

What's the direction of INTERIOR ARCHITECTURAL DESIGN in 21 Century High Tech\ulcorner The purpose of this research is to show not only practical use of Computer Graphic(CG) as simple tool function, but offering conversation with computer and other ways of method. When we consider poor CG market, investment on the research of VR(Virtual Reality) is the most urgent. The investment on VR will solve various problems. Firstly. It will solve the problems drived from Interior design process by making spatial images like reality. Secondly, It will solve high wages and financial difficulties caused by raise cost funds. Thirdly, It prevents in a road from foreign company that will bring enormous program, caused by opening the domestic market. Also, It help interior designer check in advance the problems in constructure through showing him a supposed imagination including the system and location of equipments. But it is reality that even ordinary American can't offer VR(Virtual Reality) System. We should have noted that it is normal to spend 10 billion won for such presentation as Model House in the large corporation. We must acknowledge that it is such a waist of money nationally. Therefore, investment on CG & VR System is essential in order to save cost more effective presentation & interior design. We will see great result within a year. As we can see, there is huge area we have make develop. One of them is specific technical plan on VR System and study of flow chart. We close with simple methodological way to use VR System and will study Computer System. Which is fitting to CG that we have to solve the link of hardware and software on VR System\ulcorner We know from the cases in other countries that continuous research on this subject has great value for Interior Architectural Design and its effective use. When we try hard not only for methodological use but practical use, the purpose of CG and VR System will be a factor to contribute on this subject for better Interior design & presentation.