• The Journal of Advanced Prosthodontics
• /
• v.10 no.4
• /
• pp.291-299
• /
• 2018

PURPOSE. To assess the degree of conversion (DC) and light irradiance delivered to light-cured and dual-cured cements by application of different light sources through various types of monolithic computer-aided design and computer-aided manufacturing (CAD/CAM) materials. MATERIALS AND METHODS. RelyX Ultimate Clicker light-cured and dual-cured resin cement specimens with 1.5-mm thicknesses (n=300, 10/group), were placed under four types of crystalline core structure (Vita Enamic, Vita Suprinity, GC Ceresmart, Degudent Prettau Anterior). The specimens were irradiated for 40 seconds with an LED Soft-Start or pulse-delay unit or 20 seconds with a QTH unit. DC ratios were determined by using Fourier transform infrared spectroscopy (FTIR) after curing the specimen at 1 day and 1 month. The data were analyzed using the Mann-Whitney U test (for paired comparison) and the Kruskal-Wallis H test (for multiple comparison), with a significance level of P<.05. RESULTS. DC values were the highest for RelyX Ultimate Clicker light-cure specimens polymerized with the LED Soft-Start unit. The combination of the Vita Suprinity disc and RelyX Ultimate Clicker dual-cure resin cement yielded significantly higher values at both timepoints with all light units (all, P<.05). CONCLUSION. Within the limitations of this study, we conclude that the DC of RelyX Ultimate Clicker dual-cure resin cement was improved significantly by the use of Vita Suprinity and the LED Soft-Start light unit. We strongly recommend the combined use of an LED light unit and dual-cure luting cement for monolithic ceramic restorations.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.3
• /
• pp.188-198
• /
• 2018

Purpose: Recently, according to the development of digital technology, computer aided design/computer aided manufacture (CAD/CAM) system is widely used for fabrication of various dental prostheses in the field of dentistry. This study aims to survey the present state and awareness of CAD/CAM system on domestic dental field, and to supply the advice for the application of the new system. Materials and methods: In this questionnaire survey was conducted for a total of 298 dentists, dental hygienist and dental technicians of the whole country including the dental hospital of Seoul National University for two months from November to December, 2016 through mail. Results: The most important purpose to consider when purchasing a dental CAD/CAM milling machine were the performance of the milling machine (64.43%) and the use of milling machine was the highest with 49.33% of manufacturing for dental prosthesis and customized implant abutment. In addition, more than 60% of respondents answered positively about the purchase of new milling machine if the CAD/CAM milling machine was improved to satisfactory performance. Conclusion: This survey results show that the improved CAD/CAM milling machine would be play an important role in the dental industry in preparation for digitization and the 4th industrial revolution.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.23-28
• /
• 1987

A Computer Aided Design (CAD) program of robot application engineering has been developed for the efficient examination of HR8000 robot. For the Simulation of robot motion. direct and inverse kinematics of robot manipulator was analyzed and robot motion was visualized. The program could contribute to upgrade accuracy and to minimize the time for the robot application engineering.

• Journal of the Korean Home Economics Association
• /
• v.36 no.12
• /
• pp.25-41
• /
• 1998

HALS(Hypermedia-Aided Learning System) is very useful computer networking educational system in high information society, and was developed by Kyungwon University. This system has three characteristics; 1) face to face learning, 2) ultra high speed information networing, 3) web based hypermedia courseware. So, the purpose of this study is to try the application to pre-parent eucational program(session 4 : becoming parents through the experience of pregnancy and childbirth). For this purpose it is described the definition and characteristics of HALS. Next, it is represented the model of pre-parent educational program applied to HALS and the pictures of the session 4 (initial window, help function window, etc).

• International Journal of Computer Science & Network Security
• /
• v.22 no.8
• /
• pp.87-96
• /
• 2022

This paper employs a computer-aided text analysis (CATA) and a Critical Discourse Analysis (CDA) to explore the strategies of recruitment and intellectual polarization in ISIS (Islamic State in Iraq and Syria) media. The paper's main objective is to shed light on the efficacy of employing computer software in the linguistic analysis of texts, and the extent to which CATA software contribute to deciphering hidden meanings of texts as well as to arrive at concise and authentic results from these texts. More specifically, this paper attempts to demonstrate the contribution of CATA software represented in the two variables of Frequency Distribution Analysis (FDA) and Content Analysis (CA) in decoding the strategies of recruitment and intellectual polarization in one of ISIS 's digital publication: Rumiyah (a digital magazine published by ISIS). The analytical focus is on three strategies of recruitment and intellectual polarization: (i) lexicalization, (ii) intertextual religionisation, and (iii) justification. Two main findings are revealed in this study. First, the application of CATA software into the linguistic investigation of texts contributes effectively to the understanding of the thematic and ideological messages pertaining to the analyzed text. Second, the computational analysis guarantees concise, credible, authentic and ample results than is the case if the analysis is conducted without the work of computer software. The paper, therefore, recommends the integration of CATA software into the linguistic analysis of the various types of texts.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10a
• /
• pp.807-811
• /
• 1987

This paper describes the application of CAD/CAM systems to the sales and order entry/engineering stages as well as the design of control systems. Large quantities of drawings are required, and the use of graphic CAD systems can result in considerable savings. Some applications of CAD to system engineering/system generation are described.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.4
• /
• pp.145-150
• /
• 1997

A computer-aided process design system for axisymmetric deep drawing products has been developed. An approach to the system is based on the knowledge based system. The hypothesized process outline of the deep drawing operations is generated in the geometrical design module of the system. In this paper, the module has been expanded. The rules of process design sechems for complex cup drawings are formulated from handbooks, experimental results and empirical knowhow of the field experts. The input to the system is final sheet-metal objects geometry and the output from the system is process sequence with intermediate objects geometries and process parameters, such as drawing load, blank holding force, clearance and cup-drawing coefficient.

• Journal of Biomedical Engineering Research
• /
• v.26 no.5
• /
• pp.283-294
• /
• 2005

The Center for Imaging Human Structures (CIH) was established in December 2002 to develop new diagnostic imaging techniques and to make them available to the greater community of biomedical and clinical researchers at Sungkyunkwan University. CIH has been involved in 5 specific activities to provide solutions for early diagnosis and improved treatment of human diseases. The five area goals include: 1) development of a digital mammography system with computer aided diagnosis (CAD); 2) development of digital radiological imaging techniques; 3) development of unified medical solutions using 3D image fusion; 4) development of multi-purpose digital endoscopy; and, 5) evaluation of new imaging systems for clinical application

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.676-679
• /
• 2001

A low-temperature cofired-ceramic (LTCC) multi-layer ceramic (MLC) band-pass filter (BPF) is presented, which has the benefits of low cost and small size. The BPF is designed for a IMT-2000 handset. The computer-aided design technology is also presented. The BPF with an attenuation pole at below the passband has been discussed and realized. The equivalent circuit of the BPF was established by transmission lines and lumped capacitors. The frequency characteristics of the LTCC-MLC BPF is well acceptable for IMT-2000 application.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.846-850
• /
• 1996

Today's product development requires simultaneous satisfaction of low cost, high quality and fast time to market. It is, however, difficult for product designers and engineers to achieve this goal due to too many requirements. This study shows integrated Computer Aided Engineering (CAE) approach can help to achieve such goal. CAE can not only support designers when decision needs to be made during concept design period but also provide evaluation of the designed parts and guidance to the best design of products during detail design period. Furthermore, integration with virtual prototyping concept can reduce number of actual prototyping and consequently reduce product development cost and time considerably. In order to demonstrate its possibility, example of washing machine development using CAE and its results are presented in this study.