• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.3
• /
• pp.231-238
• /
• 2017

Using 3D based BIM(Building Information Modeling) enables a variety of construction simulations. The is no case to simulate BIM demonstration experiment on deeply immersed virtual reality environment in korea. This paper develops a multi screen based simulation system to enable 3D based immersed environment to diverse decision making and virtual construction simulation. In a developed simulation laboratory, we can carry out BIM drawing review, disaster evacuation simulation, constructability review on wild land and design urban planning using haptic device on 3-side space with 4K resolution . Also, It can review large amount of drawings without data conversion because of compatibility with BIM software.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.369-374
• /
• 2010

최근 건설 산업에서 BIM이 각광 받으면서, BIM 기반의 다양한 엔지니어링 기술 도입 및 프로세스 적용이 시도 되고 있다. 이중 BIM 기반의 프로젝트 운영을 위해서는 BIM의 데이터의 저장, 수정, 배포뿐만 아니라, 관련 주체간의 협업이 가능한 환경이 요구되고 있으며, 이러한 환경 구축을 위해 제조업에서 활용되고 있는 PDM(Project Data Management) 또는 PLM (Product Life-cycle Management) 시스템을 벤치마킹한 CPLM (Construction Project Life-cycle Management)과 같은 BIM 기반 협업 시스템이 등장하고 있다. 하지만 기존의 이러한 협업 시스템의 경우, 건설 프로젝트가 가지는 다양한 계약 방식, 관리 단계, 관련 정보의 체계 등에 대한 종합적 계획 없이 프로젝트의 각 참여 주체들의 기존 관리 방식을 도입함으로써, 당초 BIM 기술을 도입하여 달성하고자 하는 원활한 협업 환경을 구축하는데 한계를 가지고 있다. 따라서 본 연구에서는 최근 BIM 가이드라인의 도입 등에서 시도되고 있는 BIM Planning이라는 개념을 활용하여, BIM 기반 협업 시스템의 구축 이전에 BIM을 관리하기 위한 관리 구조, 방식, 데이터 체계 등을 효과적으로 계획하고, 이를 시스템에 반영시킴으로써 보다 효과적인 BIM 기반 협업 환경이 구축될 수 있는 체계를 제안하였다.

• Advances in Computational Design
• /
• v.5 no.2
• /
• pp.127-146
• /
• 2020

Building Information Modeling (BIM) is increasingly used throughout the facility's life cycle for various applications, such as design, construction, facility management, and maintenance. For existing buildings, the geometry of as-built BIM is often constructed using dense, three dimensional (3D) point clouds data obtained with laser scanners. Traditionally, as-built BIM systems do not contain the material and textural information of the buildings' elements. This paper presents a semi-automatic method for generation of material and texture rich as-built BIM. The method captures and integrates material and textural information of building elements into as-built BIM using thermal infrared sensing (TIS). The proposed method uses TIS to capture thermal images of the interior walls of an existing building. These images are then processed to extract the interior walls using a segmentation algorithm. The digital numbers in the resulted images are then transformed into radiance values that represent the emitted thermal infrared radiation. Machine learning techniques are then applied to build a correlation between the radiance values and the material type in each image. The radiance values were used to extract textural information from the images. The extracted textural and material information are then robustly integrated into the as-built BIM providing the data needed for the assessment of building conditions in general including energy efficiency, among others.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.91-94
• /
• 2011

시설물 전생애주기에 걸쳐 정보가 공유되고 피드백 될 수 있는 BIM(Building Information Modeling) 기술의 등장은 유지보수 관리자들에게 가장 필요한 유지관리점검 도구의 의미를 지님과 동시에, 정보모델을 기반으로 주요 기술영역 및 사업주체간 원활한 의사소통이 가능해지도록 한다. 효율적인 지하철 터널의 유지관리를 위해서는 체계적으로 조직된 데이터가 필수적이다. 설계, 시공, 유지관리 단계별로 효과적인 협업을 위한 유기적인 단일 모델이 요구된다. BIM기반의 지하철 터널 구조물의 유지관리를 위해 건설정보분류체계 및 이를 보안한 유지관리점검 표준분류체계를 적용한 정보모델을 개발하였다.

• Korean Journal of Computational Design and Engineering
• /
• v.21 no.3
• /
• pp.281-295
• /
• 2016

Lately, the management of domestic BIM performance is quite lacking, as the evaluation and management data from successful cases of BIM implementation both on projects and in companies, and related effects (time, cost and other physical gains) are not well kept for future use in BIM development. In order to overcome the above obstacles, a systematic approach to evaluating BIM adoption with focus on particular elements like BIM implementation environment and processes, and the physical factors yielded by BIM, is necessary. In this study, objective and detailed assessment indicators and weights that are appropriate for the domestic situation were derived through research for purposes of developing a web-based BIM maturity measurement program that is tailor-made for the Korean construction atmosphere. Through a company's self-maturity measurement, excellent quality of BIM deliverables and output can be achieved and managed. Furthermore, the domestic BIM capacity can gradually increase since design firms' BIM capability can be judged during procurement basing on measurement indicators.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.344-347
• /
• 2009

건축, 토목 분야의 정보 교환을 위한 표준으로 주목받고 있는 BIM 모델의 국제 표준인 IFC 표준을 위해, 소프트웨어가 IFC 표준에 맞게 유효한 정보를 입출력 하도록 도와주고, IFC 파일이 표준에 맞는지 검증할 수 있는 모듈을 개발했다. 특히, 지역별 및 국가별 상황에 맞게 BIM 모델을 수정하거나 확장해 사용하도록 권고하고 있는 상황에서 다양한 확장 IFC 표준을 효과적으로 지원할 수 있도록 IFC 표준을 정의하는 EXPRESS 언어로부터, 객체 지향 언어를 위한 소프트웨어 개발 라이브러리를 자동으로 생성하고, 해당 SDK를 활용해 IFC 모델을 검증하는 라이브러리를 자동으로 생성하며, IFC 파일을 검증할 수 있는 독립적인 실행 파일도 자동으로 생성할 수 있도록 했다. 또한 객체 지향 라이브러리를 사용함으로써 주어진 IFC 모델을 효과적으로 문서화 할 수 있도록 HTML 생성 도구를 개발하거나 3차원 형상 확인이 가능하도록 VRML 생성 도구를 개발하는 등의 작업이 쉽게 이뤄짐을 확인했다. 이렇게 자동화된 BIM 소프트웨어 개발 도구는 IFC 모델의 수정이나 확장을 고려하는 BIM 소프트웨어 개발 프로젝트의 생산성을 향상시키고, 해당 시스템의 운영에 신뢰도를 높이는 것은 물론이며, 향후 국내 실정에 맞게 운영될 BIM 인증 제도에도 활용하면 기존의 수작업 방식 인증제도에 비해 인증에 걸리는 시간과 비용을 줄이는 것은 물론 인증 자체의 객관성과 정확성, 투명성과 신뢰성을 높일 수 있을 것으로 기대된다.

• Korean Journal of Computational Design and Engineering
• /
• v.21 no.3
• /
• pp.267-280
• /
• 2016

In the construction industry, adoption of BIM is a global tendency whereas it doesn't seem to be fully activated in domestic market. Thus, the need of BIM ROI measurement is emerging. There has been a few researches which is only focused on evaluating achievement of BIM in constructional stage. However, it's hard to find any studies on the case of measurement of BIM ROI at the design phase. Therefore, this paper analyzes the domestic and external 12 advanced researches in the measurement of BIM ROI and suggests common investment and return facts. Based on this, this paper proposes a measuring method which is applicable in domestic architectural firms. To determine the appropriateness of the measure, there has been an expert survey and interview. According to the expert survey, the measure itself is practical. But in other survey targeting industry employee, actual profit and efficiency appear to be significantly different from previous expectations. In short, in the domestic conditions in the design stage, the introduction of BIM doesn't have a practical effect and this is one of the main reason why BIM can't be fully functional.

• Journal of KIBIM
• /
• v.9 no.2
• /
• pp.1-10
• /
• 2019

In this research, schedule optimization is defined as balancing the number of workers while keeping the demand and needs of the project resources, creating the perfect schedule for each activity. Therefore, when one optimizes a schedule, multiple potentials of schedule changes are assessed to get an instant view of changes that avoid any over and under staffing while maximizing productivity levels for the available labor cost. Optimizing the number of workers in the scheduling process is not a simple task since it usually involves many different factors to be considered such as the development of quantity take-offs, cost estimating, scheduling, direct/indirect costs, and borrowing costs in cash flow while each factor affecting the others simultaneously. That is why the optimization process usually requires complex computational simulations/modeling. This research attempts to find an optimal selection of daily maximum workers in a project while considering the impacts of other factors at the same time through OPEN BIM based multiple computer simulations in resource leveling. This paper integrates several different processes such as quantity take-offs, cost estimating, and scheduling processes through computer aided simulations and prediction in generating/comparing different outcomes of each process. To achieve interoperability among different simulation processes, this research utilized data exchanges supported by building SMART-IFC effort in automating the data extraction and retrieval. Numerous computer simulations were run, which included necessary aspects of construction scheduling, to produce sufficient alternatives for a given project.

• Korean Journal of Computational Design and Engineering
• /
• v.21 no.3
• /
• pp.252-266
• /
• 2016

An architectural pre-design, which is conducted prior to the architecture design, supports fundamental configuration during the entire AEC project by predicting the cost, demand, etc., of the building, and is therefore gaining importance. In particular, the massing calculation of the pre-design phase should be prioritized, as it is fundamental to architectural outline. However, most architects depend on only their experience and intuition while conceptualizing an integrated framework of design conditions, including the building code and requirements for the massing calculation of the object. Therefore, many difficulties arise in terms of performing appropriate tasks. Thus, the purpose of this study is to implement a knowledge-based BIM for explicitly representing the design knowledge, which is the basis of decision making for an architect while performing the massing calculation. In particular, the 3D knowledge relevant to a project can be provided and accumulated in the massing calculation by the BIM system; this facilitates an integral understanding. Consequently, the approximate result of massing calculation in 3D BIM environment, through both the knowledge-based BIM template and plug-in, can be swiftly provided to the architect. In addition, the architect can invent various alternatives, estimate resulting costs, and reuse the accumulated knowledge in future BIM design processes.

• Korean Journal of Computational Design and Engineering
• /
• v.19 no.4
• /
• pp.368-389
• /
• 2014

There are many agendas and discussion subjects for BIM-based Criteria Design phase. At that time, some problems are occurred by software compatibility, simple repetitive tasks, rework caused by missing information etc. In this study, we focus on solving that problems by applying API(Application Programming Interface) method. For effective study, we construct Criteria Design process by using DSM (Dependency Structure Matrix) and study applicability of API. It will be effective for time-consuming task and simply labor-intensive tasks by applying API. we expect improving BIM-based Design Process and Data quality, work productivity without missing information and shapes for using API.