• Geomechanics and Engineering
• /
• 재33권6호
• /
• pp.553-565
• /
• 2023

As the structure of broken rock mass is complex, with obvious discontinuity and anisotropy, it is generally necessary to reinforce broken rock mass using grouting in underground construction. The purpose of this study is to experimentally investigate the mechanical properties of broken rock mass after grouting reinforcement with consideration of the characteristics of broken rock mass (i.e., degree of fragmentation and shape) and a range of reinforcement methods such as relative strength ratio between the broken rock mass and cement-based grout stone body (λ), and volumetric block proportion (VBP) representing the volumetric ratio of broken rock mass and the overall cement grout-broken rock mass mixture after the reinforcement. The experimental results show that the strength and deformation of the reinforced broken rock mass is largely determined by relative strength ratio (λ) and VBP. In addition, the enhancement in compressive strength by grouting is more obvious for broken rock mass with spherical shape under a relatively high strength ratio (e.g., λ=2.0), whereas the shape of rock mass has little influence when the strength ratio is low (e.g., λ=0.1). Importantly, the results indicate that columnar splitting failure and inclined shear failure are two typical failure modes of broken rock mass with grouting reinforcement.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1992년도 봄 학술발표회 논문집
• /
• pp.90-94
• /
• 1992

ACI318-89 Recommened that when the specified compressive strength of concrete in a column is greater than 1.4 times that specified for a floor system, top surface of the column concrete shall extend 2ft (600mm) into the slab from the face of column to avoid unexpected brittle failure. The major variables are extension distance, compressive strength of concrete (f'c), shear confinement ratio(Vs), and loading types. The test results showed that the load capacity of the specimen subjected to monotonic loading had more than that of the specimen subjected to one way cyclic loadings. The failure models of specimens under cyclic loading were concentrated at 5∼20cm apart region from beam-column joint face. Ducility index(μf) are increased with increasing of shear confinement ratio. The specimen with 2ft extension distance shows more ductility than specimen with lft extension distance.

• Composites Research
• /
• 제17권4호
• /
• pp.7-17
• /
• 2004

본 연구에서 복합재의 압축 강도에 대한 두께 효과가 $[0_4]_{ns},{\;}[45/0/-45/90]_{ns},{\;}[45_n/0_n/-45_n/90_n]_s$ (n=2 to 8) 등의 적층 방법을 이용하여 체계적인 실험을 통해 조사되었다. 여기서 섬유 체적비, 기공률, 섬유 굴곡도, 층간 응력 등, 적층 두께 증가에 따른 압축 강도에 영향을 주는 파라미터들이 실험과 이론적으로 연구되었다. 또한 엇교차 대칭 복합재판의 파괴강도에 대한 적층 순서 효과도 조사되었다. 이를 위해 2종류의 다른 스케일링 효과를 갖는 (1) 폰라이-레벨 기법인 $[45_n/0_n/-45_n/90_n]_s$과 (2) 서브라미네이트-레벨 기법인 $[45_n/0_n/-45_n/90_n]_s$가 적용되었다. 일 방향 적층 시편 $[0_4]_{ns}$과 플라이-레벨인 $[45_n/0_n/-45_n/90_n]_s$에는 분명한 두께효과를 나타내었다. 그리고 섬유 굴곡도와 기공률의 두께효과에 기여하는 주요 파라미터 들임이 확인되었다. 그러나 서브라미네이트-레벨인 $[45/0/-45/90]_{ns}$의 압축강도는 시편 두께의 변화에도 불구하고 별 영향을 나타내지 않았으면, 서브라미네이트- 레벨 시편에서 구한 강토가 플라이-레벨 시편에서 구한 강도보다 약간 높았다. 이 같은 효과에 대한 이유는 섬유 굴곡도, 기공률, 자유단 효과 및 $0^{\circ}$층과 비 $0^{\circ}$층 사이의 응력 재 분포에 의한 영향인 것으로 보인다. 측정된 파괴강도는 예측 값과 비교되었다.

• Steel and Composite Structures
• /
• 제23권5호
• /
• pp.585-596
• /
• 2017

Tubular joints have been widely used in offshore platforms and space structures due to their merits such as easy fabrication, aesthetic appearance and better static strength. For existing tubular joints, a grouted sleeve reinforced method was proposed in this paper. Experimental tests on five tubular T-joints reinforced with the grouted sleeve and two conventional tubular T-joints were conducted to investigate their mechanical behaviour. A constant axial compressive force was applied to the chord end to simulate the compressive state of the chord member during the tests. Then an axial compressive force was applied to the top end of the brace member until the collapse of the joint specimens occurred. The parameters investigated herein were the grout thickness, the sleeve length coefficient and the sleeve construction method. The failure mode, ultimate load, initial stiffness and deformability of these joint specimens were discussed. It was found that: (1) The grouted sleeve could change the failure mode of tubular T-joints. (2) The grouted sleeve was observed to provide strength enhancement up to 154.3%~172.7% for the corresponding un-reinforced joint. (3) The initial stiffness and deformability were also greatly improved by the grouted sleeve. (4) The sleeve length coefficient was a key parameter for the improved effect of the grouted sleeve reinforced method.

• 한국농공학회지
• /
• 제44권1호
• /
• pp.93-102
• /
• 2002

Steel fiber and polymer are used widely for reinforcement material of RC structures because of its excellences of the durability, serviceability as well as mechanical properties. The purpose of this study is to investigate the shear behavior of polymer cement high strength concrete beams mixed with steel fiber. The compressive strength of concrete was based on the 100$\times$200 mm cylinder specimens. The compressive strength of concrete are 320$kgf/cm^2$, 436 $kgf/cm^2$ and 520 $kgf/cm^2$ in the 28 days. The static test was carried out to measure the ultimate load, the initial load of flexural and diagonal cracking, crack patterns and fracture modes. Also, load-strain and load-deflection examined. During the test cracks were sketched against the load values according to the growth of crack. result are as follows; (1) The failure modes of the specimens are increased in rigidity and durability with mixing steel fiber and polymer. (2) The load of initial crack was similar a theory of shear-crack strength. (3) The deflection and strain at failure load of Polymer-steel fiber high strength concrete beams were increased, improving the brittleness of the high strength concrete.

• Computers and Concrete
• /
• 제7권2호
• /
• pp.169-190
• /
• 2010

The focus of this research effort was characterization of the flexural and tensile properties of a specific ultra-high-strength, fiber-reinforced concrete material. The material exhibited a mean unconfined compressive strength of approximately 140 MPa and was reinforced with short, randomly distributed alkali resistant glass fibers. As a part of the study, coupled experimental, analytical and numerical investigations were performed. Flexural and direct tension tests were first conducted to experimentally characterize material behavior. Following experimentation, a micromechanically-based analytical model was utilized to calculate the material's tensile failure response, which was compared to the experimental results. Lastly, to investigate the relationship between the tensile failure and flexural response, a numerical analysis of the flexural experiments was performed utilizing the experimentally developed tensile failure function. Results of the experimental, analytical and numerical investigations are presented herein.

• Structural Engineering and Mechanics
• /
• 제5권5호
• /
• pp.625-634
• /
• 1997

Reinforced concrete (RC) interior beam-column joints with high-strength materials: concrete compressive strength of 100 MPa and the yield strength of longitudinal bars of 685 MPa, were analyzed using three-dimensional (3-D) nonlinear finite element method (FEM). Specimen OKJ3 of joint shear failure type was a plane interior joint, and Specimen 12 of beam flexural failure type was a 3-D interior joint with transverse beams. Though the analytical initial stiffness was higher than experimental one, the analytical results gave a good agreement with the test results on the maximum story shear forces, the failure mode.

• Computers and Concrete
• /
• 제3권1호
• /
• pp.1-15
• /
• 2006

The seismic safety of reinforced concrete containment building can be evaluated by probabilistic analysis considering randomness of earthquake, which is more rational than deterministic analysis. In the safety assessment of earthquake-resistant structures by the deterministic theory, it is not easy to consider the effects of random variables but the reliability theory and random vibration theory are useful to assess the seismic safety with considering random effects. The reliability assessment of reinforced concrete containment building subjected to earthquake load includes the structural analysis considering random variables such as load, resistance and analysis method, the definition of limit states and the reliability analysis. The reliability analysis procedure requires much time and labor and also needs to get the high confidence in results. In this study, random vibration analysis of containment building is performed with random variables as earthquake load, concrete compressive strength, modal damping ratio. The seismic responses of critical elements of structure are approximated at the most probable failure point by the response surface method. The response surface method helps to figure out the quantitative characteristics of structural response variability. And the limit state is defined as the failure surface of concrete under multi-axial stress, finally the limit state probability of failure can be obtained simply by first-order second moment method. The reliability analysis for the multiaxial strength limit state and the uniaxial strength limit state is performed and the results are compared with each other. This study concludes that the multiaxial failure criterion is a likely limit state to predict concrete failure strength under combined state of stresses and the reliability analysis results are compatible with the fact that the maximum compressive strength of concrete under biaxial compression state increases.

• 한국지반환경공학회 논문집
• /
• 제24권11호
• /
• pp.5-10
• /
• 2023

지하수 제어가 필요한 분야에서 다방면으로 활용되는 Slag-CB는 CB의 일종으로 CB에 혼합되는 시멘트의 일부를 GGBS 로 치환하여 사용하는 차수벽의 일종이다. 일반적으로 Slag-CB는 GGBS의 치환율이 증가함에 따라 압축강도, 차수성, 내구성 및 내화학성 등이 장기적으로 향상되는 장점이 있으나, 벽체의 유연성 및 변형에 대한 저항성이 저하되며 파괴 시 취성을 보이는 문제가 있다. 이러한 문제를 해결하기 위해 일부 품질기준에서는 Slag-CB를 저강도로 설계하도록 권장하고 있어 GGBS 치환율이 높은 고강도의 Slag-CB의 현장 적용에 다소 어려움이 있다. 이에 본 연구에서는 Slag-CB의 유연성 및 변형에 대한 저항성을 개선하여 취성파괴를 방지함으로 Slag-CB의 현장 활용성 및 적용성을 향상시키기 위해 나일론 섬유를 혼합한 Slag-CB 차수벽을 대상으로 압축거동 특성을 평가하고, 이를 비교·분석함으로 Slag-CB의 유연성 및 변형에 대한 저항성을 향상시킬 수 있는 방안을 제시하였다.

• 콘크리트학회논문집
• /
• 제20권5호
• /
• pp.583-592
• /
• 2008

최근 고강도콘크리트의 압축강도, 탄성계수 및 최대하중에서의 변형에 대한 고온의 영향이 실험적으로 연구되어지고 있다. 본 연구는 40, 60, 80 MPa 급 고강도콘크리트의 재료 역학적 특성에 있어서 $20{\sim}700^{\circ}C$ 범위로 상승되는 온도의 영향을 연구하는데 그 목적이 있다. 본 연구에서는 설계하중 사전재하 및 잔존강도시험 방법으로서 시험체를 가열하기 전에 상온 압축강도의 25% 하중을 사전재하한 후 가열을 실시하고, 가열하는 동안 하중을 유지하며, 목표온도에 도달한 후 고온상태 및 상온에서 24시간 냉각상태에서 시험체가 파괴될 때까지 재하를 실시하였다. 시험은 W/B 46%, 32% 및 25%로 이루어진 콘크리트 시험체에 대하여 $20{\sim}700^{\circ}C$의 다양한 온도하에서 실시하였다. 시험 결과 콘크리트 강도가 증가할수록 고온에서의 상대적인 압축강도와 탄성계수는 감소하였으며, 최대하중에서의 축방향 변형은 설계하중 사전재하와 상관성이 높은 것으로 나타났다. 또한 온도상승에 따른 콘크리트의 열팽창 변형은 압축강도 뿐만 아니라 하중 크기의 영향을 받는 것으로 나타났으며, 최종적으로 가열을 받은 고강도콘크리트의 압축강도 및 탄성계수에 대한 모델식을 제안하였다.