• The Korean Journal of Pain
• /
• v.22 no.2
• /
• pp.176-180
• /
• 2009

Cases of pyogenic spondylodiscitis are relatively rare diseases that concern 2-7% of total cases of osteomyelitis. Owing to the low frequency and initial nonspecific nature of signs and symptoms, diagnosis is often delayed up to 2-6 months. If the proper treatment is not established due to a diagnostic delay, there is a possibility of a serious neurologic deficit and spinal instability. We report two cases of infectious spondylodiscitis which were misdiagnosed as compression fracture and spinal stenosis respectively. They could be correctly diagnosed after MRI and laboratory test and under the recovery state after an antifungal and antibiotic medication. Special careful attention during the diagnostic procedure is a really important step considering the diagnostic delay and its resultant unsatisfactory outcome.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.11 no.2 s.24
• /
• pp.13-21
• /
• 1987

Nowadays, the amount used carpets are on the increase, according to the improvement of life-style. The pleasantness of carpet is caused by the properties of pile, because the most carpets are made pile fabric. For that reason, a study on the compressional properties of carpet is very important issue. This study has been carried out to investigate the differences of compressional properties in various acrylic carpets which were Cut, Tufted, Jacquard and Shag. Each acrylic carpets was transformed to 4, 6, 8 mm of pile height, as results of transformation, we could get the pressure-thickness curve and pressure-deformation curve. The results are summarized as follows. 1. Rate of compression increases, compressive resistance and compressive elasticity decr-eases, as pile height increases. 2. Regardless of pile height, compressive elasticity reached the limit in recovery period at about 10 minutes. 3. Work of compression increases, as pile height increases. 4. Work of compression decreases, as apparent density increases. 5, Cut-type carpet has the best cushion.

• Fashion & Textile Research Journal
• /
• v.20 no.3
• /
• pp.343-352
• /
• 2018

The objective of this study is to investigate the market of fitness compression wear as well as to design an optimal fitness compression wear by analyzing the muscle and movement characteristics of the elderly women in Korea. In this regard, research for functional garments is needed to increase muscle activity of elderly people during physical exercise. Firstly, we investigated the brand, design, size, material, and pattern of fitness wear based on the market survey. Secondly, we identified preference, evaluation items, evaluation method, and pattern design method based on the literature review. Finally, in addition, the motion type, range, angle to improve the muscle strength of the elderly were investigated and the maximum muscle strengths of each motion were analyzed by using 2007 Size Korea data (n = 386). It is also designed for muscle fatigue through exercise and rapid fatigue recovery after exercise. The evaluation methods for fitness compression wear were classified as motor functionality, physiological comfort, pattern and material suitability evaluations. The muscle strength at leg (pushing force) and waist (lifting force) of the ages of 60 to 69 years old showed 239.3 N and 274.5 N, respectively, which were the lowest forces compared to younger age groups. By applying these results to the design process of fitness wear, it is anticipated that the fitness wear will have a proper fit to the body shape of elderly people in South Korea as well as it can increase muscle efficiency to promote physical capability and healthy life for senior people.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.56 no.1
• /
• pp.28-36
• /
• 2007

Sensor networks are usually composed of tens or thousands of tiny devices with limited resources. Because of their limited resources, many researchers have studied on the energy management in the WSNs(Wireless Sensor Networks), especially taking into account communications efficiency. For effective data transmission and sensor fault detection in sensor network environment, a new remote monitoring system based on PCA(Principle Component Analysis) and AANN(Auto Associative Neural Network) is proposed. PCA and AANN have emerged as a useful tool for data compression and identification of abnormal data. Proposed system can be effectively applied to sensor network working in LEA2C(Low Energy Adaptive Connectionist Clustering) routing algorithms. To verify its applicability, some simulation studies on the data obtained from real WSNs are executed.

• The Korean journal of internal medicine
• /
• v.33 no.6
• /
• pp.1058-1069
• /
• 2018

Neuropathic cancer pain (NCP) is caused by nerve damage attributable to the cancer per se, and/or treatments including chemotherapy, radiotherapy, and surgery; the prevalence is reported to be as high as 40%. The etiologies of NCP include direct nerve invasion or nerve compression by the cancer, neural toxicity, chemotherapy, and radiotherapy. NCP is subdivided into plexopathy, radiculopathy, and peripheral neuropathies, among several other categories. The clinical characteristics of NCP differ from those of nociceptive pain in terms of both the hypersensitivity symptoms (burning, tingling, and an electrical sensation) and the hyposensitivity symptoms (numbness and muscle weakness). Recovery requires several months to years, even after recovery from injury. Management is complex; NCP does not usually respond to opioids, although treatments may feature both opioids and adjuvant drugs including antidepressants, anticonvulsants, and anti-arrhythmic agents, all of which improve the quality-of-life. This review addresses the pathophysiology, clinical characteristics and management of NCP, and factors rendering pain control difficult.

• International Journal of Human Ecology
• /
• v.8 no.2
• /
• pp.99-106
• /
• 2007

In this study, the mechanical properties related to the fabric appearance of well being functional bamboo knitted fabric before and after loess dyeing were evaluated. The mechanical properties of fabrics were measured by KES-F system, that is, shape retention, draping, wrinkle recovery, compression property, and surface properties, and total hand value of three types of knitted fabric, 100% bamboo, 100% cotton, and bamboo / cotton blend (60 / 40) were evaluated before and after loess dyeing. As a result, it was found that appearance density, shape retention, and drape coefficient of cotton knitted fabric were greater than those of bamboo knitted fabric. After loess dyeing, shape retention and drape coefficient, wrinkle recovery of bamboo knitted fabric improved and WC/C and MMD/SMD decreased. According to THV, the hand of bamboo/cotton blend knit is the best among three samples by compensation the weak properties of the two fiber. Therefore, loess dyeing seemed to be a good method for improving shape retention and hand value of 100% bamboo and bamboo blended fabric.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.638-641
• /
• 2008

Geothermal water at moderate temperature in a range between 30 to $50^{\circ}C$ exists sparse in surroundings. Mostly they are utilized as heat or water source at spar zones in Korea. However, a large portion of used water is discarded due to its poor recovery quality and inferior application technologies. In this research, an innovative heat pump system based on the hybrid concept that combinate compression cycle and absorption cycle was investigated mathematically. The hybrid heat pump aims to recycle various kind of the heat sources at moderate temperature including geothermal water effectively. The prime objective of the simulation is to design a compression/absorption hybrid heat pump system which can make high temperature above the level of $90^{\circ}C$ and low temperature of $20^{\circ}C$ as well at the same using $50^{\circ}C$ geothermal heat water. As a result, primitive data was provided as a basis to design a prototype 3 RT class hybrid heat pump.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.1
• /
• pp.59-66
• /
• 2003

The purpose of this study is to analyze the characteristics (COP) of the heat pump system for various operating conditions with the use of seawater heat source and exhaust energy. To accomplish the goal, first of all, the computer simulation for heat pump system is carried out. The heat pump system model is made of a waste heat recovery system and a vapor compression refrigeration system, and the working fluid is R-22. The model calculated the change of COP with the variation of temperature and flow rate. The COP and the plate heat exchanger (PHE) area of the heat pump system are considered moderately high in the condensation temperature of $25^{\circ}^C$ and the evaporation temperature of $2^{\circ}^C$ in indoor culture system. The simulation results will be used effectively for the design and the performance prediction of heat pump system using unused energy in a land base aquaculture system.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.3
• /
• pp.206-212
• /
• 2011

It was investigated the hardness and dimensional stability of heat-compressed wood by compression temperature and time. The surface hardness of heat-compressed wood increased with increasing compression temperature. The lowest hardness value (5.0 N/$mm^2$) was observed in the temperature $70^{\circ}C$ while the highest value (15.6 N/$mm^2$) was obtained in compression temperature $220^{\circ}C$. Dimensional recovery test results showed that fixation of compression set improved with increasing compression temperature. However, the fixation effects were negligible by press time. Contact angle increased with increasing press temperature and time.

• Journal of Conservation Science
• /
• v.37 no.1
• /
• pp.55-62
• /
• 2021

This study investigated mechanical property changes by measuring compression factors, resilience, and compressive strength according to packaging pattern and filling rate to identify the applicability of cultural heritage packaging using thermoplastic polyurethane elastomers (TPU). Research results indicate that the cross-shaped 3D pattern showed the best resilience when the internal filling rate was 20%, while the octet pattern was the best when the filling rate was either 40 and 60%. The octet pattern had the best mechanical properties and stability with resistance capacities of 20.79 kgf/cm², 40.40 kgf/cm², and 82.23 kgf/cm² at 38%, 39%, and 40% recovery speeds, respectively, depending on the internal filling rate (20, 40, 60%). Based on these results, basic data on the applicability, stability, and reliability of 3D cultural heritage packaging materials using TPU materials were obtained.