• 디지털콘텐츠학회 논문지
• /
• 제16권5호
• /
• pp.775-781
• /
• 2015

2015년 2월 11일 국내 최초 2HD MMS 시험방송이 EBS에서 시작되었다. MPEG-2 코덱기반의 영상 압축 방식을 사용하고 있으며, 화질 최적화를 위해서 1080i 와 720p 주사방식에 따른 변화 및 효율적 데이터 사용을 위한 가변 비트율(Variable Bit Rate) 연구결과를 반영하였다. MMS 방송에서 화질 최적화를 위하여 2개의 HD 채널에 가변 비트율을 적용하여 인코딩하는 경우 가변 GOP(Group Of Picture) 동작으로 수신 TV에서 채널 전환 시 영상 표출에 걸리는 시간이 길어지는 현상이 발생한다. 본 연구에서는 ON-AIR TS 분석 및 실험을 통해서 인코딩 단계에서 GOP 설정에 따른 I 프레임 디코딩 시간 관계를 검증하였다. 검증 데이터를 활용하여 Encoder GOP 파라미터를 조정하는 방법으로 1080i와 720p 주사방식에 따라서 다르게 나타나는 영상 표시 시간 지연문제를 개선하였다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 추계학술발표대회 논문집
• /
• pp.404-408
• /
• 2009

The liquid desiccant air-conditioning system has been proposed as an alternative to the conventional vapor compression cooling systems to control air humidity. The complete system of liquid desiccant air-conditioning system is consisted two main components those are humidifier (regeneration) and dehumidifier. Humidifier part is connected to the load when summer season which is the air condition is hot and humid have to be turned into comfort condition on human. This paper purpose is performances study of air flow rate effect on a structured packed tower on cooling and dehumidifier system using liquid lithium chloride as the desiccant. Experimental apparatus used in this present study is consisted of three components those are load chamber, packed tower and chiller. Load chamber’s volume is $40m^3$, and packed tower dimension is cubic with length 0.4m occupied with packed column. Totally, 15 experimental has done using 5 times repeat on each variable of air velocity that varying on 2m/s, 3m/s and 4m/s with other conditions are controlled. Air inlet initial temperature and relative humidity are set respectively on $30^{\circ}C$ and 52%, desiccant flow rate is 0.63 kg/s, desiccant temperature is $10^{\circ}C$ and desiccant concentration is 0.4. The result of this study shows that averagely, the moisture removal rate and the heat transfer rate are influenced by the air velocity. Higher air velocity will increase the heat transfer and decreasing the moisture removal rate. At adiabatic condition the air velocity of 2 m/s respectively is having the higher moisture removal rate acceleration then the air velocity of 3m/s and 4 m/s until the steady state condition.

• 한국컴퓨터정보학회논문지
• /
• 제10권3호
• /
• pp.151-159
• /
• 2005

기존의 디지털 워터마킹 기술은 대부분 삽입과 검출에서 동일한 키를 사용하는 대칭키 방식이다. 이러한 대칭키 워터마킹 방식은 검출을 쉽게 할 수 있는 반면에 공격자에 의하여 검출기의 비밀 키 정보가 유출될 경우 삽입 정보가 제거되거나 변조되는 치명적인 공격을 받을 수 있다. 따라서 최근에는 삽입기에서 삽입한 비밀 정보를 검출기에서 공개 키를 이용하여 검출하는 비대칭 워터마킹(Asymmetric watermarking)방식이 차세대 워터마킹 기술로 주목을 받고 있다. 본 논문에서는 선형 연립방정식의 해집합을 이용하여 개인 키의 탐색 공간을 효과적으로 확장하였다. 또한 공개 키로부터 개인 키를 유출할 수 없도록 하기 위하여 공개 키의 생성은 안전한 선형변환 방식에 기초하였으며 높은 상관도 검출이 가능하도록 구성되었다. 실험결과 워터마크가 삽입된 영상에서 1비트의 정보 뿐만 아니라, 멀티 비트의 정보에 대한 공개 키 상관도 검출이 정확히 이루어짐을 확인할 수 있었으며 JPEG압축 후에도 높은 상관도 검출이 가능한 것으로 나타났다.

• 정보처리학회논문지C
• /
• 제12C권3호
• /
• pp.379-386
• /
• 2005

기존의 디지털 워터마킹 기술은 대부분 삽입과 검출에서 같은 키를 사용하는 대칭 키 방식이다. 이러한 대칭 키 워터마킹 방식은 검출을 쉽게 할 수 있는 반면에 공격자에 의하여 검출기의 비밀 키 정보가 유출될 경우 삽입 정보가 제거되거나 변조되는 치명적인 공격을 받을 수 있다. 따라서 최근에는 삽입기에서 삽입한 비밀 정보를 검출기에서 공개 키를 이용하여 검출하는 비대칭 워터마킹(Asymmetric Watermarking) 방식이 차세대 워터마킹 기술로 주목을 받고 있다. 본 논문에서는 선형 연립방정식의 해집합을 이용하여 개인 키의 탐색 공간을 효과적으로 확장하였다. 또한 공개 키로부터 개인 키를 유출할 수 없도록 하기 위하여 공개 키의 생성은 안전한 선형변환 방식에 기초하였으며 높은 상관도 검출이 가능하도록 구성되었다. 실험결과 워터마크가 삽입된 영상에서 1bit의 정보 뿐만 아니라, 멀티 bit의 정보에 대한 공개 키 상관도 검출이 정확히 이루어짐을 확인할 수 있었으며 JPEG 압축 후에도 높은 상관도 검출이 가능한 것으로 나타났다.

• 한국산학기술학회논문지
• /
• 제12권2호
• /
• pp.1032-1037
• /
• 2011

본 연구에서는 전처리 공정을 거친 천연가스로부터 에탄 이상의 성분을 회수하기 위한 탈메탄탑에 대한 전산모사와 공정 최적화를 수행하였다. 전처리된 천연가스는 탈메탄탑 상부의 차가운 기상류와의 열교환 및 프로판 냉동 사이클이 포함된 예냉공정을 거친 후에 기상과 액상이 분리된다. 기상은 터보 팽창기를 거치면서 생산되는 동력을 residue gas의 압력을 높이기 위한 압축기에 전달한 후에 부분적으로 응축되어 탈메탄탑 상부로 주입된다. 액상류는 줄-톰슨 팽창 밸브를 거친 후 더욱 냉각되어 탈메탄탑의 중간부로 주입된다. 원료 대비 에탄의 회수율은 80% 이상으로 정하였으며, 탈메탄탑의 탑저에서 에탄에 대한 메탄의 몰비는 0.0119로 정하였다. 한편 프로판 냉동 사이클의 heat duty를 최소화시키기 위해서 원료를 분리하여 side reboiler와 열교환시킴으로써 냉열의 일부를 회수할 수 있었다.

• Elastomers and Composites
• /
• 제56권4호
• /
• pp.209-216
• /
• 2021

In this study, we observed the mechanical properties, thermal stability, and low temperature sealing performance of fluorosilicone elastic composites. When the blend ratio of Phenyl vinyl methyl silicone (PVMQ) was increased, the tensile strength, modulus at 100%, and compression set were decreased. The thermal stability of fluorosilicone elastic composites showed a similar tendency. These were caused by poorer green strength of PVMQ than Fluorosilicone rubber (FVMQ). The change in the tensile strength and elongation at -40℃ showed a decreasing tendency with increasing PVMQ blend ratio. By increasing the PVMQ blend ratio, low-temperature performance was improved. The Dynamic mechanical analysis (DMA) results showed that T_g was decreased and low-temperature performance was improved with increasing PVMQ blend ratio. However tanδ was decreased becaused of the poor green strength and elasticity of PVMQ. From a hysteresis loss at -40℃, the hysteresis loss value was increased and fluorosilicone elastic composites showed the decreasing tendency of elasticity with increasing PVMQ blend ratio. From the TR test, TR10 was decreased with increasing PVMQ blend ratio. FS-4 (45% PVMQ blended composites) showed a TR10 of -68.0℃ that was 5℃ lower than that of FS-1 (100% FVMQ). The gas leakage temperature was decreased with increasing PVMQ blend ratio. The gas leakage temperature of FS-4 was -69.2℃ that was 5℃ lower than that of FS-1. Caused by the polymer chain started to transfer from a glassy state to a rubbery state and had a mobility of chain under T_g, the gas leakage temperature showed a lower value than T_g. The sealing performance at low temperature was dominated by T_g that directly affected the mobility of the polymer chain.

• Steel and Composite Structures
• /
• 제31권1호
• /
• pp.13-25
• /
• 2019

Reactive powder concrete (RPC) is a type of ultra-high strength concrete that has a relatively high brittleness. However, its ductility can be improved by confinement, and the use of RPC in composite RPC filled steel tube columns has become an important subject of research in recent years. This paper aims to present an experimental study of axial capacity calculation of RPC filled circular steel tube columns. Twenty short columns under axial compression were tested and information on their failure patterns, deformation performance, confinement mechanism and load capacity were presented. The effects of load conditions, diameter-thickness ratio and compressive strength of RPC on the axial behavior were further discussed. The experimental results show that: (1) specimens display drum-shaped failure or shear failure respectively with different confinement coefficients, and the load capacity of most specimens increases after the peak load; (2) the steel tube only provides lateral confinement in the elastic-plastic stage for fully loaded specimens, while the confinement effect from steel tube initials at the set of loading for partially loaded specimens; (3) confinement increases the load capacity of specimens by 3% to 38%, and this increase is more pronounced as the confinement coefficient becomes larger; (4) the residual capacity-to-ultimate capacity ratio is larger than 0.75 for test specimens, thus identifying the composite columns have good ductility. The working mechanism and force model of the composite columns were analyzed, and based on the twin-shear unified strength theory, calculation methods of axial capacity for columns with two load conditions were established.

• Computers and Concrete
• /
• 제27권4호
• /
• pp.333-341
• /
• 2021

Steel slag, an industrial reject from the steel rolling process, has been identified as one of the suitable, environmentally friendly materials for concrete production. Given that the coarse aggregate portion represents about 70% of concrete constituents, other economic approaches have been found in the use of alternative materials such as steel slag in concrete. Unfortunately, a standard framework for its application is still lacking. Therefore, this study proposed functional model equations for the determination of strength properties (compression and splitting tensile) of steel slag aggregate concrete (SSAC), using gene expression programming (GEP). The study, in the experimental phase, utilized steel slag as a partial replacement of crushed rock, in steps 20%, 40%, 60%, 80%, and 100%, respectively. The predictor variables included in the analysis were cement, sand, granite, steel slag, water/cement ratio, and curing regime (age). For the model development, 60-75% of the dataset was used as the training set, while the remaining data was used for testing the model. Empirical results illustrate that steel aggregate could be used up to 100% replacement of conventional aggregate, while also yielding comparable results as the latter. The GEP-based functional relations were tested statistically. The minimum absolute percentage error (MAPE), and root mean square error (RMSE) for compressive strength are 6.9 and 1.4, and 12.52 and 0.91 for the train and test datasets, respectively. With the consistency of both the training and testing datasets, the model has shown a strong capacity to predict the strength properties of SSAC. The results showed that the proposed model equations are reliably suitable for estimating SSAC strength properties. The GEP-based formula is relatively simple and useful for pre-design applications.

• 공업화학
• /
• 제22권2호
• /
• pp.149-154
• /
• 2011

연료전지 스택 작동환경에서의 열노화 특성을 살펴보기 위하여 다양한 고무 compound의 내열 및 압축 영구 줄음률의 평가를 실시하고, 스택의 장시간 운전을 통해 접합할 수 있는 대상액인 $H_2SO_4$, $H_2O$, LLC (Ethylene glycol : $H_2O=50:50$)에 대하여 장시간 평가를 실시하였다. NBR과 EPDM은 시간이 경과할수록 침적액의 변색하는 것을 알 수 있었으며, VMQ는 $H_2SO_4$ 분위기에서 시간에 따라 고무가 노화되는 것을 TGA, SEM, EDS 분석을 통하여 확인하였다.

• PNF and Movement
• /
• 제10권1호
• /
• pp.61-70
• /
• 2012

Purpose : The purpose of this study was to investigate thigh muscle-bone CSA and leg strength during low-intensity exercise program with leg blood flow restriction by external compression to reduce muscle outflow. Methods : Eighteen health students gave informed written consent to participate in this investigation. An occlusion cuff was attached to the proximal end of the leg so that blood flow was reduced during the training. The training was conducted one times a day, three times a week, for 8 weeks using one sets of 30 minutes. The training program performed to squat with standing, lunge with standing and heel raise with one leg standing. Measurements of thigh muscle-bone CSA(cross-sectional area) and leg strength were evaluated pre and post-training. Statistical evaluation of these data was accomplished utilizing a paired t-test by SPSS 12.0 program for windows. Significance level was set at p <.05. Results : All data are reported as means and standard deviations(SD) for all variables. The result of the study is followed; After the training, muscle-bone CSA, gluteus maximus m, quadriceps m, hamstring m of both legs were significantly improved but not calf muscle(p<.05). There was no significant difference of change quantity between muscle-bone CSA and leg strength in Lt. and Rt. side. But the variation in leg muscle strength of Rt. leg(dominant) was much more increased than Lt. leg(non-dominant) after 8 weeks training. Conclusion : Low-intensity training with leg blood flow restriction offers a potentially useful method for improving leg muscle strength.