• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 춘계학술대회논문집
• /
• pp.167-170
• /
• 2000

Recently the sub-micron structured substrates of 0.74 ${mu}ell$ track pitch and 800 $\AA$groove depth are required for DVD-RAM and the track pitch is expected to be narrower as the need for the information storage density is getting higher. For the accurate replication of the land-groove structure in the stamper to the plastic substrates it is important to control the injection -compression molding process such that the integrity of the replication for the land-groove structure is maximized. in the present study polycarbonate substrates were fabricated by injection comression molding and the land-groove structure regarded as one of mold temperature and the compression pressure on the integrity of the replication were examined experimentally. An efficient design methodology using the response surface method (RSM) the central composite design(CCD) technique and the analysis-of-variance (ANOVA) was developed to obtain the optimum processing conditions which maximize the integrity of the replication with a limited number of experiments.

• 한국컴퓨터정보학회논문지
• /
• 제24권2호
• /
• pp.157-161
• /
• 2019

In this paper, the researcher investigated whether strengthening the back muscles affects the quality of chest compressions during cardiopulmonary resuscitation by university students. A total of 50 students majoring in healthcare were included from September 2018 to November. The participants performed chest compressions during cardiopulmonary resuscitation (CPR) for 2 min after back muscle strength was measured. Then, after adequate rest, the participants repeated the back muscle strength measurements and chest compressions after taping the erector spinae muscle. The paired t-test was performed to analyze changes in chest compression quality after taping. As results, taping enhanced back muscle strength and positively affected the depth of chest compressions and the compression to recoil ratio. Taping also increased confidence and lowered fatigability during chest compressions, so the participants preferred being taped while performing chest compressions. Based on these results, taping could help emergency room medical personnel specialized in CPR to enhance the quality of CPR and relieve back pain and fatigability by strengthening the back muscles.

• Current Applied Physics
• /
• 제18권11호
• /
• pp.1451-1457
• /
• 2018

Injection compression molding (ICM) is an advantageous processing method for producing thin and large polymeric parts in a robust manner. In the current study, we employed the ICM process for an energy-related application, i.e., thin and large polymeric battery case. A mold for manufacturing the battery case was fabricated using injection molding. The filling behavior of molten polymer in the mold cavity was investigated experimentally. To provide an in-depth understanding of the ICM process, ICM and normal injection molding processes were compared numerically. It was found that the ICM had a relatively low filling pressure, which resulted in reduced shrinkage and warpage of the final products. Effect of the parting line gap on the ICM characteristics, such as filling pressure, clamping force, filling time, volumetric shrinkage, and warpage, was analyzed via numerical simulation. The smaller gap in the ICM parting line led to the better dimensional stability in the finished product. The ICM sample using a 0.1 mm gap showed a 76% reduction in the dimensional deflection compared with the normal injection molded part.

• Journal of information and communication convergence engineering
• /
• 제13권1호
• /
• pp.62-68
• /
• 2015

In this paper, we propose a watermarking method for protecting the ownership of three-dimensional (3D) content generated from depth and texture images. After selecting the target areas to preserve the watermark by depth-image-based rendering, the reference viewpoint image is moved right and left in the depth map until the maximum viewpoint change is obtained and the overlapped region is generated for marking space. The region is divided into four subparts and scanned. After applying discrete cosine transform, the watermarks are inserted. To extract the watermark, the viewpoint can be changed by referring to the viewpoint image and the corresponding depth image initially, before returning to the original viewpoint. The watermark embedding and extracting algorithm are based on quantization. The watermarked image is attacked by the methods of JPEG compression, blurring, sharpening, and salt-pepper noise.

• 한국융합학회논문지
• /
• 제12권5호
• /
• pp.71-77
• /
• 2021

본 연구는 심폐소생술에 주로 사용되는 체간 근육이 플랭크 운동을 통해 가슴압박에 어떠한 영향을 미치는지 알아보고자 하였다. 연구대상자들은 12주 프로그램에 참여하였으며 한 명의 대상자가 8분 동안 가슴 압박만을 실시하였다. 플랭크 운동에 의한 근육량 변화는 프로그램 4주차부터 8주차까지 통계적으로 유의한 차이가 있었다(p<.01). 근육 활동 변화는 3주부터 10주까지 통계적으로 유의한 차이를 보였다(p<.01). 흉부 압박 깊이는 4주차부터 8주차까지 통계적으로 유의한 차이를 보였다(p<.01). 또한 불완전한 압박 후 가슴 이완은 4주차부터 10주차까지 통계적으로 유의한 차이가 있었다(p<.01). 가슴압박 유지 시간은 2주에서 12주까지 통계적으로 유의한 차이가 있었다(p<.01). 연구대상자의 근육량과 근육 활동은 플랭크 운동 프로그램에 참여한 후 이전보다 더 많이 증가하여 가슴 압박에 도움이 된다는 것을 보여주었다.

• 한국정보통신학회논문지
• /
• 제26권9호
• /
• pp.1392-1398
• /
• 2022

이 연구는 소아 심폐소생술 중 새로운 가슴압박 방법을 활용했을 때, 가슴압박의 질을 비교하여 효과적인 심폐소생술을 할 수 있도록 하고자 시행되었다. 무작위 교차방법(Randomized Crossover Design)에 의한 실험 연구로 BLS Health Care-Provider 자격을 이수한 28명의 응급구조사를 대상으로 가슴압박 시행 시 깊이, 속도, 압박 대 이완의 비율, 용이성, 안정감 등을 측정하였다. 수집된 자료는 SPSS Ver. 23.0 for Win 통계프로그램을 이용하여 분석하였다. 본 연구의 결과 를 종합해 보면, 소아 심폐소생술에서 가슴압박 시행 시 새로운 가슴압박법을 이용한다면 가슴압박의 질적 지표가 향상되었음을 알 수 있었다. 기존의 방법을 고수하는 것도 좋지만 새로운 가슴압박 방법을 통해 다양한 연령대와 환경요소에 대한 추가적인 연구를 바탕으로 임상적 활용의 가능성을 확인하는 것이 필요할 것이다.

• 한국인터넷방송통신학회논문지
• /
• 제10권1호
• /
• pp.81-90
• /
• 2010

본 논문에서는 계층적 깊이 영상을 H.264 기술로 부호화 시켜 압축된 데이터 크기를 확인하고, 복원된 각 영상의 품질 성능을 알아보았다. 3차원 워핑된 계층적 깊이 영상을 임계값에 따라 조정해 가면서 Filling 보간 실험을 하고 H.264 부호화 시켜 압축된 데이터 크기를 측정하였다. H.264/AVC 기술은 쉽게 비디오와 관련된 콘텐트에 대한 H.264 기술로 확장 될 수 있다. 그래서 깊이 정보를 포함하는 다시점 영상을 효과적으로 압축할 수 있는 계층적 깊이 영상 구조라는 새로운 콘텐트에 적용하는 방법을 제안하였다. 다시점 비디오 영상의 방대한 데이터 양을 감소시키며, 고품질의 영상을 제공하고, 에러 복원 기능이 강화되는 장점도 가지고 있다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.35-36
• /
• 2019

Major influence factors for piercing depth of concrete against small caliber bullet are target's property such as compression strength of concrete and bullet's property such as the velocity and weight of it. In particular about the bullet's property, velocity and incidence angle could be controlled by specific position or distance between targets and shooter, but the angle of yaw of bullet dose not. Because the the angle of yaw of bullet causes lower piercing force of bullet, some errors on piercing depth of concrete could be appeared by live fire test for the evaluation of protective performance. Therefore, we have checked the error canceling effect on the piercing depth of concrete by single shot and barrage of small caiber bullets. As a result, we identified that the error of piercing depth by the angle of yaw of bullet could be cancelled by barrage.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 연약지반처리위원회 학술세미나
• /
• pp.71-78
• /
• 2000

SHANSEP method involves the consolidation to stresses in excess of the preconsolidation pressure in order to overcome sample disturbance effect. The concept of SHANSEP is based on an approach to laboratory test which attempts to reproduce the in-situ conditions more closely than is possible in routine tests and evaluates normalized strength parameters for the soil as a function of OCR. But SHANSEP method can be applied only to fairly uniform clay deposits, and is unsuitable for a random deposit. In this study, CK/sub o/U triaxial compression test and incremental loading consolidation test were performed for the application of SHANSEP method on Yangsan clay. During the K/sub o/-consolidation, triaxial specimens were consolidated to stress equal to two times the in-situ vertical effective stress. And for overconsolidated condition, the specimens were swelled to a known vertical effective stress in order to have the desired OCR. With the results of CK/sub o/U triaxial compression test using the block samples, the relationship between c/sub u//σ/sub vc/' and OCR on Yangsan clay was established. For evaluating the undrained shear strength of Yangsan clay with depth, CK/sub o/U triaxial compression test was performed using the piston samples taken from Yangsan site. And also undrained shear strength was analyzed from the in-situ test such as Cone Penetration Test(CPT), Dilatometer Test(DMT), and Field Vane Test(FVT) and was compared with that of CK/sub o/U triaxial compression test.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.35-40
• /
• 2001

The exact solution of strength of reinforced concrete RC columns subjected to axial compression combined with biaxial bending needs trial and adjustment procedure to find the depth and inclination of the neutral axis. Thus, approximate methods of analysis and design for biaxial bending are used in practice. Load contour interprets the relation of biaxial bending and equivalent uniaxial bending by u factor which is related to material properties and column shapes. The purpose of this study is to investigate the behavior of high strength RC columns subjected to the combined axial compression and biaxial bending. Fifteen test specimens with dimensions of 200mm$\times$200mm and 4-Dl3 longitudinal steel were examined. The variable of the test is compressive strength of concrete (350, 585, 650kgf/$cm^{2}$), compression load ratio (0.2$P_{o}}$, 0.35$P_{o}}$, 0.5$P_{o}}$), and inclination of loading ($\theta$=0, 22.5, $45^{\circ}$). Test results of coefficient $\alpha$ depending on the compressive strength of concrete are compared with ACI code.