• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2003년도 추계 학술발표회 논문집
• /
• pp.181-186
• /
• 2003

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 2009년도 추계학술대회
• /
• pp.209-217
• /
• 2009

• 한국산학기술학회논문지
• /
• 제17권6호
• /
• pp.418-428
• /
• 2016

본 연구는 정비사업에 참여하고 있는 참여자를 시공사, 공무원, 조합으로 구분하여 공공관리제도에 대한 만족도가 사업의 종합만족도를 경유하여 지속적인 사업참여의사에 미치는 영향구조를 비교 분석하고자 한다. 분석을 위한 평가요인을 도출하기 위해 선행연구 고찰을 통해 일반제도를 평가할 수 있는 평가체계를 1차적으로 도출하였다. 도출된 평가체계를 도시정비관련 전문가를 대상으로 FGI를 실시하여 공공관리제도 평가분야 및 세부 요인을 구축하였다. 다음으로 공공관리제도 평가분야에 대한 만족도가 사업의 종합만족도를 경유하여 지속적 사업참여의사를 분석하기 위해 가설 및 연구모형을 설정하고 PLS-SEM모형으로 이를 검증하였다. 분석결과를 요약하면 시공사의 경우 사업계획수립 및 수단의 선정(5.848)과 사후관리 및 지속성(2.392)이 종합만족도에 유의한 영향을 미치는 것으로 나타났으며 공무원의 경우 이용자의 이용 및 참여(3.249)와 사후관리 및 지속성(4.019)이 종합만족도에 유의한 영향을 미치는 것으로 도출되었다. 조합의 경우 조직의 운영(4.368), 이용자의 이용 및 참여(4.974)가 종합만족도에 유의한 영향을 미치는 것으로 나타났고 모든 사업참여자의 경우 종합만족도가 지속적 사업참여의사에 유의한 영향을 미치는 것으로 나타났다.

• Geomechanics and Engineering
• /
• 제23권1호
• /
• pp.85-92
• /
• 2020

This study adopted soil test and laboratory physical model experiments to simulate the tailings impoundment accumulation process according to the principle of similarity. Relying on the practical engineering, it analyzed the tailings deposition characteristics on dry beach surface during the damming process, as well as the variation rules of dam saturation line. Results suggested that, the tailings particles gradually became finer along the dry beach surface to inside the impoundment. The particle size suddenly changed at the junction between the deposited beach and the water surface, which displayed an obvious coarsening phenomenon. Besides, the deposited beach exhibited the vertical feature of coarse upward and fine downward on the whole. Additionally, in the physical model, the saturation line elevated with the increase in dam height, and its amplitude was relatively obvious within the range of 1.0-4.5 m away from the initial dam. Under flood condition, the saturation line height was higher than that under normal condition on the whole, with the maximum height difference of 4 cm. This study could provide an important theoretical basis for further studies on dam failure experiments and the evolution rules of leaked tailings flow.

• Geomechanics and Engineering
• /
• 제36권5호
• /
• pp.427-440
• /
• 2024

This study concentrates on the 301 comprehensive caving working face, notable for its considerable mining height. The roof model is established by integrating prior geological data and the latest borehole rock stratum's physical and mechanical parameters. This comprehensive approach enables the determination of lithology, thickness, and mechanical properties of the roof within 50 m of the primary mining coal seam. Utilizing the transfer rock beam theory and incorporating mining pressure monitoring data, the study delves into the geometric parameters of the direct roof, basic roof movement, and roof pressure during the initial mining process of the 301 comprehensive caving working face. The direct roof of the mining working face is stratified into upper and lower sections. The lower direct roof consists of 6.0 m thick coarse sandstone, while the upper direct roof comprises 9.2 m coarse sandstone, 2.6 m sandy mudstone, and 2.8 m medium sandstone. The basic roof stratum, totaling 22.1 m in thickness, includes layers such as silty sand, medium sandstone, sandy mudstone, and coal. The first pressure step of the basic roof is 61.6 m, with theoretical research indicating a maximum roof pressure of 1.62 MPa during periodic pressure. Extensive simulations and analyses of roof subsidence and advanced abutment pressure under varying working face lengths. Optimal roof control effect is observed when the mining face length falls within the range of 140 m-155 m. This study holds significance as it optimizes the working face length in thick coal seams, enhancing safety and efficiency in coal mining operations.

• International Journal of Railway
• /
• 제2권2호
• /
• pp.60-69
• /
• 2009

In recent years, technology developments in different countries, especially in newly industrialized countries, are extremely indebted to appropriate technology transfer by these countries. Nevertheless the technology transfer process in the present situation is complex, and its success is related to the coordination rate with the political, economic, social, and environmental objectives of countries. Today debates related to the transfer of the technical know how accompanied by equipment hardware has found remarkable importance such that countries seek increasing comprehensive capabilities in the field of transferred technology for which Preventive Maintenance (PM) is one of the aspects. This research with the purpose to determine the technological capability level and to study the role of PM in the effective & appropriate technology transfer in subway industry is carried out for presenting a suitable model for the technology transfer in this industry with an attitude towards the effects of principal PM factors. For this purpose, after the study of different and relevant models existing in the field of suitable methods for technology transfer, some equipment PM theories and models were selected as the base for the compilation of the questionnaire. With the help of questionnaire, main PM factors that are effective in the field of technology transfer were extracted, and finally, their effects on technology transfer were analyzed, identified and a comprehensive model suggested in this connection.

• 대한교통학회지
• /
• 제24권3호
• /
• pp.157-165
• /
• 2006

본 연구는 총체적 관점에서 통신이 통행에 미치는 영향을 수요, 공급, 비용, 토지이용 등의 인과관계를 고려한 종합적인 체계속에서 분석하는 것이다. 이를 위해 통행, 통신, 토지이용, 경제활동, 사회인구지표를 고려한 개념적 모형을 개발하였다. 그리고 이 개념적 모형을 토대로 미국의 $1950{\sim}2000$년의 시계열 자료를 이용하여 통신(시내 전화통화 수, 장거리 전화통화 수, 이동전화가입자수)과 통행 (vehicle-miles traveled와 대중교통이용자수)간의 구조방정식 모형을 개발하였다. 연구결과 통신의 이용이 승용차 및 대중교통의 통행을 증가시키는 것으로 분석되었다. 이밖에 교통시설공급 확대와 토지이용(도시교외화)도 통행에 영향을 미치는 것으로 나타났다.

• BMB Reports
• /
• 제37권1호
• /
• pp.93-106
• /
• 2004

The new complexity arising from the genome sequencing projects requires new comprehensive post-genomic strategies: advanced studies in regulatory mechanisms, application of new high-throughput technologies at a genome-wide scale, at the different levels of cellular complexity (genome, transcriptome, proteome and metabolome), efficient analysis of the results, and application of new bioinformatic methods in an integrative or systems biology perspective. This can be accomplished in studies with model organisms under controlled conditions. In this review a perspective of the favourable characteristics of yeast as a touchstone model in post-genomic research is presented. The state-of-the art, latest advances in the field and bottlenecks, new strategies, new regulatory mechanisms, applications (patents) and high-throughput technologies, most of them being developed and validated in yeast, are presented. The optimal characteristics of yeast as a well-defined system for comprehensive studies under controlled conditions makes it a perfect model to be used in integrative, 'systems biology' studies to get new insights into the mechanisms of regulation (regulatory networks) responsible of specific phenotypes under particular environmental conditions, to be applied to more complex organisms (e.g. plants, human).

• International Journal of Precision Engineering and Manufacturing
• /
• 제4권2호
• /
• pp.71-76
• /
• 2003

A virtual machine tool (VMT) is presented in this two-part paper. In Part 1, the analytical foundation for a virtual machining system is developed, which is envisioned as the foundation for a comprehensive simulation environment capable of predicting the outcome of cutting processes. The VHT system undergoes "pseudo-real machining", before actual cutting with a CNC machine tool takes place, to provide the proper cutting conditions for process planners and to compensate or control the machining process in terms of the productivity and attributes of the products. The attributes can be characterized by the machined surface error, dimensional accuracy, roughness, integrity, and so forth. The main components of the VMT are the cutting process, application, thermal behavior, and feed drive modules. In Part 1, the cutting process module is presented. When verified experimentally, the proposed models gave significantly better prediction results than any other methods. In Part 2 of this paper, the thermal behavior and feed drive modules are developed, and the models are integrated into a comprehensive software environment.vironment.

• 한국정보통신학회논문지
• /
• 제16권3호
• /
• pp.626-634
• /
• 2012

양식 환경의 과학적이고 체계적인 관리와 양식어민을 위해 실시간 수질 및 급이 정보 이외에도 자료의 종합적인 판단과 변화 이력을 확인하고 관리할 수 있는 시스템이 필요하다. 따라서 본 연구에서는 양식장의 수질, 급이의 현재 상태를 제시하고 이력 정보를 기반으로 시뮬레이션 가능하며 상태 변화를 단계 별로 확인 가능한 시스템을 비주얼 C++를 이용하여 구현하였다. 또한 수질, 급이 상태 정보를 수산지식을 기반으로 종합적으로 분석할 수 있고 제시할 수 있는 엔트로피 모델을 제안하였다. 이는 추후 질병 및 다양한 연구 결과를 반영한 고차원의 양식 환경 모델을 생성할 수 있는 토대가 될 수 있다.