• Analytical Science and Technology
• /
• v.31 no.5
• /
• pp.179-184
• /
• 2018

Diphencyprone (DPCP) is frequently used as a compounded preparation in dermatology for the treatment of alopecia and recalcitrant warts based on the immune reaction of skin allergy. However, DPCP is a non-recognized agent in Pharmacopoeia, because there are no criteria or analytical method for quality control of its powder and formulation. DPCP is unstable under light irradiation because as it easily decomposes to diphenylacetylene (DPA). This study aims to develop a simultaneous HPLC analytical method for analyzing DPCP and DPA in the raw materials and compounded preparation. The method required a C18 column ($250{\times}4.6mm$, $5{\mu}m$) at $40^{\circ}C$ with a mobile phase of (A) 0.01 M phosphoric acid in water and (B) acetonitrile at UV 220 nm. DPA conversion to DPCP in the powder and compounded preparations was accelerated after light exposure for 60 min. In addition, this resulted in different patterns depending on the wavelength of light and the formulation. That is, DPCP in compounded preparation was more unstable than that in the powder. However, the DPCP formulation in amber bottles was observed to remain stable, although the measured concentrations of DPCP were somewhat different from the nominal concentration of the compounded preparations. The control of the exact concentration is required for effective disease treatment, depending on the state of the patient. In conclusion, these results will be useful for the recognition of DPCP in Pharmacopoeia and new DPCP formulation development to prevent photodecomposition.

• Elastomers and Composites
• /
• v.50 no.1
• /
• pp.62-67
• /
• 2015

The surface modification of microfibriled cellulose (MFC) was carried out through the hydrolysis-condensation reaction using (3-aminopropyl)triethoxysilane (APS) and 3-glycidyloxypropyltriethoxysilane (GPS) and then the modified cellulose was compounded with bio-degradable poly(lactic acid) (PLA). Also, pristine MFC was compounded with PLA as a control groups. The confirmation of surface modification for the pristine MFC was characterized by FT-IR and SEM/EDX. The thermal and mechanical properties of the PLA/MFC composites depended on the content of MFC and the type of silane coupling agents. From the thermal, morphological and mechanical behaviors of the PLA/MFC composites, it was found that GPS-MFC was more successful to improve the interface adhesion between PLA matrix and the surface of MFC than that of APS-MFC.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.18 no.2
• /
• pp.83-101
• /
• 2000

In this experiment butadiene rubber(BR)/acrylonitrile butadiene rubber(NBR) blends was prepared and then the applicability of BR/NBR blends as printing rubber roller was examined. With the aid of open 2-roll mill, BR, NBR and another chemical additives were compounded. Then rubber vulcanizates were manufactured by hot press and maximum torque, Mooney viscosity, mechanical properties and oil resistance of the test specimens were measured. With prolonged oil aged treating time, BR/NBR blends became soft and so the hardness of blends decreased. It could be explained by the swelling of rubber matrix with oil penetration in to rubber molecules. The undesirable low value of oil resistance of BR was significantly improved by blending BR with NBR.

• Elastomers and Composites
• /
• v.54 no.1
• /
• pp.35-39
• /
• 2019

Four different polymer compounds were prepared from four kinds of plasticizers, viz. di-2-ethylhexyl azelate (DOZ), di-2-ethylhexyl adipate (DOA), di-2-ethylhexyl sebacate (DOS), and di-2-butyl sebacate (DBS), for making cable sheaths for ships. Ethylene-vinyl acetate and ethylene-propylene-diene-copolymer as matrix polymers and ethylene-vinyl acetate grafted maleic anhydride as a coupling agent were compounded with a flame retardant, crosslinking agent, filler, and other additives, besides the plasticizer to obtain the polymer compounds. The polymer containing DOZ showed the highest MH and ${\Delta}T$ in the rheology test, while that containing DBS was found to have the lowest tensile strength and highest elongation because of low ${\Delta}T$. The four polymers showed similar values (31.7-31.9) for flame resistance, while the polymer containing DOZ showed the highest value for cold resistance.

• Korean Journal of Clinical Pharmacy
• /
• v.13 no.2
• /
• pp.82-90
• /
• 2003

Dopamine is an effective pressor for the treatment of shock and hypotension when patients do not respond to plasma volume expansion. Two dopamine intravenous delivery systems are currently available in Korea. The objective of this study was to compare dopamine premixed with prefilled system in terms of supply costs (preparation costs + personnel time), contamination rates and convenience. Time-and-motion studies were conducted to determine the time and costs associated with preparation and administration of the two systems. They were analyzed and compared by Mann-Whitney test. To evaluate the contaminaton rates of the two systems, both systems were prepared in an open environment similar to that of practical situations. Premixed and compounded solutions were then filtered by $0.22{\mu}m$ membrane filters, which were cultured at $37^{\circ}C$ for 10 days and their contents were visually checked for bacterial contamination. The convenience of the two systems was compared by itemized user assessments on preparation, dose calculation, admixture, administration and disposal of waste matters. They were analyzed by Wilcoxon's signed rank test and 100 part percentage. It was found that the preparation costs $(mean{\pm}SD)$ for premixed and prefilled systems were $271.70\pm293.55\;Won$ (Korean currency) and $1521.04\pm510.63\;Won$, respectively. The preparation time $(mean{\pm}SD)$ for premixed system was $68.10\pm35.69\;sec.$ while at for prefilled system was $154.03\pm50.06\;sec.$ (n=59 each, p<0.001). No bacterium was observed in the samples of both systems (n=20, each). User assessments indicated that the premixed system was more convenient than the prefilled system except for the item of dose calculation (n=24, p<0.001). Subjective evaluations have proven that the use of the dopamine premixed system resulted in increased efficiency of intravenous preparation by allowing personnel to devote more time to other labor-intensive duties and lower total medical costs.

• The Journal of Internal Korean Medicine
• /
• v.21 no.4
• /
• pp.543-548
• /
• 2000

After Vanherweghem J-L reported the rapidly progressive interstitial renal fibrosis that developed in patients taking the slimming preparation compounded with chinese Herb in Belgium 1993. Chinese Herb Nephropathy(CHN) has become known as a new renal disease, CHN is described as the decrease of urinary renal enzyme, neutral endopeptidase(NEP). N-acetyl-${\beta}$-Dglucosaminidase(NAG). increase of urinary low molecular protein, ${\alpha}$1-microglobulin, ${\beta}$2-microglobulin. clara cell protein(CC16), retinol-binding protein(RBP) in clinical findings, and the proximal tubular atrophy, interstitial fibrosis. urothelial atrophy. glomerular sclerosis in histology, Because CHN was caused by Chinese herb contained in slimming preparation, western medical doctors have thought that all Herb medicine might have caused renal disease and prohibit the taking of any Herb medicine, However. CHN was actually caused by the aristolochic acid contained in some Herb medicines. Aristolochia manshuriensis, Aristolochia fang chi, which is the substitutions of Akebia quinata, Stephania tetrandra has being used in clinical. Aristolochia manshuriensis. Aristolochia fang chi were different with Akebia quinata. Stephania tetrandra in botany, and it have not been classified with medicines in Oriental medicine, That is, the aristolochic acid, not Herb medicines. causes CHN, So, Chinese Herb Nephropathy should be changed to Aristolochic acid Nephropathy.

• Polymer(Korea)
• /
• v.32 no.4
• /
• pp.353-358
• /
• 2008

Maleated ethylene-propylene-diene terpolymer (MEPDM) was prepared from solution polymerization of EPDM and maleic anhydride. MEPDM-grafted-poly (dimethylsiloxane) (PDMS) copolymer (MEPDM-g-PDMS) was prepared from copolymerization of MEPDM with $\alpha$,$\omega$-hydroxyl group terminated PDMS. The MEPDM-g-PDMS was compounded with HDPE and 4-ethoxybenzoic acid modified MWCNT at $180^{\circ}C$ and positive temperature coefficient (PCT) behavior of the MWCNT composite was investigated. Surface modification of MWCNT enabled it to be more uniformly dispersed in polymer matrix and decreased aggregation of particles. Electrical resistivity of the composite was abruptly increased at melting temperature and PTC intensity of 2.3 was obtained at 15% loading of surface modified CNT.

• Journal of the Korean Society of Safety
• /
• v.19 no.2
• /
• pp.41-46
• /
• 2004

The formation of rust on metallic substrate is known to cause the damages and destructions of raw materials, which is one of the leading reasons of sturctural collapses and many kind of hazards in modern industry. Polymer gels with rust removing effects were compounded in this study by employing various kinds of acids like hydrochloric acid, phosphoric acid, gluconic acid, oxalic acid as the rust removing ingredients. TEA(Triethanolamine) as dispersant and hydrophilic chemical were used for effective gelation of acids. Also corrosion inhibitor was added to enable the coating effect and to improve rust removing effect on metallic surface. In order to investigate the rust properites on metallic substrate, artificial rusts were prepared in salt solution, using iron, copper, aluminium and brass as the base metals. The properties of gel compounds were checked by gelation, pH, viscosity, morphology property and rust removing test. Developed gel compounds in this study have a good rust removing property, showing a strong adhesion on horizontal and vertical metallic surface, and can be easily rinsed off by water.

• Journal of the Semiconductor & Display Technology
• /
• v.11 no.1
• /
• pp.21-27
• /
• 2012

The optical diffuser for direct-lit LED backlight unit was prepared by using extrusion compounding followed by thermoforming process. Poly(methyl methacrylate) (PMMA) with superior optical characteristics and polycarbonate (PC) with good thermal property were used as base resins, and crosslinked polystyrene (PS) and PMMA beads as diffusing agents were incorporated into resin matrix to derive light scattering and diffusing action. In the compounded plate, the diffusing beads were observed to be dispersed uniformly and distinctly in the continuous phase. The inclusion of polymeric beads up to 3 wt% substantially enhanced the optical characteristics such as luminance, luminance uniformity, haze for the diffuser. Two different diffusers of PC and PMMA-based compound with various compositions were compared in terms of measured optical, thermal, and mechanical properties, which would be expected to be utilized for the industrial application of LED backlight unit.

• Korean Journal of Materials Research
• /
• v.14 no.5
• /
• pp.338-342
• /
• 2004

Ni-Zn ferrite powder was obtained by wet method that was to be coprecipitated the metal nitrates, Fe($NO_3$)$_3$ㆍ$9H_2$O, Ni($NO_3$)$_2$ㆍ$6H_2$O, Zn($NO_3$)$_2$ㆍ$6H_2$O to make a high permeability material. The composition of the ferrite powder was $Fe_2$$O_3$ 52 mol%, NiO 14.4 mol%, ZnO 33.6 mol%. Ni-Zn ferrite powder was compounded by precipitating metal nitrates with NaOH in vessel at the synthetic temperature of $90^{\circ}C$ for 8 hours. Calcination temperature and sintering temperature were $700^{\circ}C$ and $1150^{\circ}C$～$1250^{\circ}C$, respectively, for 2 hours. And the other ferrite powder was also prepared by the wet ball milling that was to be mixed the metal oxides as same as the above chemical composition. We studied the properties of the powder and the electromagnetic characteristics of the sintered cores obtained from there two different processes. Wet direct process produced smaller particle size with narrower distribution of the size and more purified ferrite whose sintered cores had high permeability and high magnetization.