• 한국세라믹학회지
• /
• 제50권2호
• /
• pp.134-141
• /
• 2013

Pond ash produced from Seochun Power Station was quantitatively characterized to manufacture geopolymers with a range of Si/Al compositional ratios. Mix consistency was kept nearly constant for comparing the compressive strengths of geopolymers. The amorphous composition of coal ash was determined using XRF and quantitative X-ray diffraction. Different mix compositions were used in order to achieve Si/Al ratios of 2.0, 2.5 and 3.0 in the geopolymer binder. Geopolymers synthesized from coal ash with a Si/Al ratio of 3.0 exhibited the highest compressive strength in this study. It was found that geopolymers activated with aluminate produced different microstructure from that of geopolymers activated with silicate. High silica in alkali activators produced the fine-grained microstructure of geopolymer gel. It was also found that high compressive strength was related to low porosity and a dense, connected microstructure. The outcome of the reported experiment indicates that quantitative formulation method made it possible to choose suitable activators for achieving targeted compositions of geopolymers and to avoid efflorescence.

• 한국지구과학회지
• /
• 제36권5호
• /
• pp.447-459
• /
• 2015

Dok island comprises Pliocene volcanic products such as a series of volcanoclastic rocks and lavas ranging in composition from alkali basalts, and trachyandesites to trachytes. Compositional variation of the basaltic rocks can be attributed to fractional crystallization of olivine, clinopyroxene, plagioclase, and magnetite. Chemical variations among the trachyandesites are caused by fractionation of clinopyroxene, plagioclase, and magnetite with minor amphibole, while trachytes are controlled mainly by feldspar fractionation. Incompatible element abundance ratios and chondrite normalized LREE/HREE ratios (e.g., (La/Yb)c: 24.8 to 32.8 for basalts, 15.6 to 31.2 for trachyandesites) suggest that the origins of the basalts and trachyandesites involve both different degrees of partial melting and subsequent fractional crystallization processes. Trace element ratios of the basalts from Dok island are characterized by high Ba/Nb, La/Nb, Ba/Th and Th/U and isotopic ratios (Tasumoto and Nakamura, 1991) that are similar to the EM 1 type of oceanic island basalts such as Gough and Tristan da Cunha basalts.

• 한국결정학회지
• /
• 제14권2호
• /
• pp.73-78
• /
• 2003

(Ba/sub 1-x/Sr/sub x/)TiO₃ (BST, 0.4< x <0.65) single crystals were successfully grown by the TSSG (Top-Seeded Solution Growth) method, using a commercial [100] SrTiO₃ or as-grown [100] BST single crystals as seed crystals. To obtain the BST single crystals with various compositions x, the Ba/sr molar ratios in the solutions were systematically controlled while the Ti ion content among all cations was fixed at 67 mol%. A linear regression curve between their x values and the molar ratios of Sr/(Ba + Sr) in the solutions could be obtained, which in turn could used to select the initial composition to produce BST crystal with an aimed x value. In addition, the isothermal growth was found more effective for obtaining a compositional uniformity than a slow cooling process.

• 한국세라믹학회지
• /
• 제31권11호
• /
• pp.1283-1292
• /
• 1994

Ultra-fine $\beta$-SiC powders were fabricated by self-propagating high temperature synthesis process (SHS) using chemical furnace. The dependences of the C powders with different surface areas, the molar ratios of C/Si, the weight ratios of chemical fuel content, and pellet diameter-size on synthesis were investigated. Compositional and structural characterization of these powders was carried out by scanning electron micrograph and X-ray diffraction. The $\beta$-SiC powders which had C/Si mole ratio=1.05, 3 times chemical fuel contents, and pellet diameter=20 mm were optimum for synthesis efficiency. By optimizing process-variables, it is possible to fabricate $\beta$-SiC powders which have little secondary phases ($\alpha$-SiC).

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.95-96
• /
• 2000

The effect of $Al_2O_3$ on the dielectric constant and the coefficient of thermal expansion of lead borosilicate glasses for the application of PDP glass paste was investigated. Measurements were made theoretically by using empirical equations on the composition of the of glasses in which the $PbO/Al_2O_3$, $B_2O_3/Al_2O_3$ and $SiO_2/Al_2O_3$ ratios were systematically varied. As a result, with increasing $PbO/Al_2O_3$ the thermal expansion coefficient and the dielectric constant noticeably increased, while the change of $B_2O_3/Al_2O_3$ and $SiO_2/Al_2O_3$ ratios did not affect those properties of the glasses.

• 대한영양사협회학술지
• /
• 제16권4호
• /
• pp.341-352
• /
• 2010

The aim of this study was to use purple sweet potato powder to develop a recipe for a nutritional cookie with an optimal composition of ingredients and texture, in order to acquire strong preference responses by all age groups in sensory tests. Wheat flour was partially substituted with purple sweet potato powder to reduce the wheat flour content of the cookies. Measurements were made and analyzed according to the Response Surface Methodology technique, which showed 16 experimental points including 3 replicates for the purple sweet potato powder, sugar, and butter. The compositional and functional properties of the sample were measured, and the values obtained were applied to a mathematical model. A canonical form and perturbation plot showed the influence of each ingredient on the final product mixture. The results of sensory evaluations showed very significant values for flavor (P<0.0071), texture (P<0.0306), taste (P<0.0190), and overall quality (P<0.0142). Instrumental analysis showed significant values for hardness (P<0.0027), yellowness (P<0.0061) and spread ratio (P<0.0001). The optimal compositional ratios were determined to be 21.75 g for the purple sweet potato powder, 37.05 g for the sugar, and 60.59 g for the butter.

• 대한전기학회논문지
• /
• 제43권2호
• /
• pp.296-302
• /
• 1994

Polycrystalline CuInSeS12T thin were prepared by depositing Cu/In layer, which was sequentially sputtered varying the Cu/(Cu+In) mole ratio, on glass substrate and selenizing with selenium metal vapor in a nitrogen atmosphere. Compositional and structural, characterization was carried out by X-ray diffraction (XRD), wavelength-dispersive spectroscopy(WDS), and scanning electron microscope(SEM). Electrical characterization was carried out by the measurements of Hall effect, electrical resistivity. Large indium loss occurs in early stage of the selenization process. The selenized films which had mole ratios larger than 0.28 have chalcopyrite CuInSeS12T phase and these that had less mole ratios have sphalerite phase. The selenized films containing CuS1xTSe phase have Cu-rich CuInSeS12T phase and these that did not contain CuS1xTSe have In-rich CuInSeS12T phase. By optimizing the sputtering conditions,it is possible to fabricate CuInSeS12T thin films which have little secondary phases and an appropriate hole concentration (10S015T ~ 10S016TcmS0-3T) for solar cells.

• 대한전기학회논문지
• /
• 제44권8호
• /
• pp.1063-1067
• /
• 1995

The superconducting properties of YBa$_{2}$Cu$_{3}$$O_{7-x}$(YBaCuO) thin films prepared by laser ablation have been investigated. The x-ray diffraction patterns and surface morphology of the films were substantially different from one another. The compositional ratios of YBaCuO films were controlled by the conditions of the target-substrate distance. The YBaCuO films manufactured on MgO(100) substrate were indicated T$_{c}$(zero)=91.2 K, T$_{c}$(onset)=93 K, and J$_{c}$=3.5*10$^{5}$ A/cm$^{2}$(at 77.3K). The optimum conditions were found to be a substrate temperature of 710 .deg. C, a energy density of 2 J/cm$^{2}$, and a target-substrate distance of 60 mm in an oxygen partial pressure of 200 mTorr.0 mTorr.

• 대한본초학회지
• /
• 제35권3호
• /
• pp.33-45
• /
• 2020

Objective : The present study aimed to evaluate the change of the content of 7 active components in decoctions produced by various proportional pairs of Coptis chinensis Franch and Scutellaria baicalensis Georgi in 'Mixed decoction (MD)' and 'Single decoction mixture (SDM)'. Methods : The samples of MDs were prepared by decocting C. chinensis : S. baicalensis with the ratios of 10 g:10 g, 10 g:20 g, and 20 g:10 g. Those of SDMs were prepared by blending each single decoction from C. chinensis and S. Baicalensis with the ratios of 1:1, 1:2, and 2:1. The samples were evaluated by high-performance liquid chromatography with statistical analyses. Results : The analytical methods, which were optimized and validated, were reliably applied to present research. The content of all components in both MDs and SDMs at C. chinensis : S. baicalensis = 1:1 ratio were reduced compared with single herb decoction. The components from each compositional herb in MDs were proportionally increased with the ratio of original herb increased, but inversely proportional to paired herb. The contents of components in MDs were significantly lower than those in SDMs at all ratios, except for high content of baicalin at C. chinensis : S. baicalensis = 2:1. Conclusion : It was concluded that MDs and SDMs as well as the proportions of herbs could affect the contents of the components from original herbal medicines. These results provide the information for the quality control of herbal medicine combined C. chinensis with S. baicalensis.

• Journal of Magnetics
• /
• 제11권1호
• /
• pp.25-29
• /
• 2006

Recent experiments have demonstrated high TMR ratios in MTJs with the MgO barrier [1,2]. The CoFeB/MgO/CoFeB junctions showed better properties than the CoFe/MgO/CoFe junctions because the MgO layer had a good crystalline structure with (001) texture and smooth and sharp interface between CoFeB/MgO [3]. The amorphous CoFeB with 20 at%B starts the crystallization at $340^{\circ}C$ [4] and this crystallization of the CoFeB helps obtaining the high TMR ratio. In this work, the compositional changes in the MgO barrier and at the interface of CoFeB/MgO/CoFeB after the CoFeB crystallization were studied in annealed MTJs. XPS depth profiles were utilized. TEM analyses showed that the MgO barrier had (100) texture on CoFeB in the junctions. B in the bottom CoFeB layer diffused into the MgO barrier and B-oxide was formed at the interface of CoFeB/MgO/CoFeB after the CoFeB crystallization.