• Corrosion Science and Technology
• /
• v.7 no.1
• /
• pp.1-5
• /
• 2008

The gas atmosphere in continuous annealing and galvanizing lines alters both composition and microstructure of the surface and sub-surface of sheet steel. The formation and morphology of the oxides of alloying elements in High Strength Interstitial Free (HS-IF), Dual Phase (DP) and Transformation-Induced Plasticity (TRIP) steels are strongly influenced by the furnace dew point, and the presence of specific oxide may result in surface defects and bare areas on galvanized sheet products. The present contribution reviews the progress made recently in understanding the selective formation of surface and subsurface oxides during annealing in hot dip galvanizing and conventional continuous annealing lines. It is believed that the surface and sub-surface composition and microstructure have a pronounced influence on galvanized sheet product surface quality. In the present study, it is shown that the understanding of the relevant phenomena requires a combination of precise laboratory-scale simulations of the relevant technological processes and the use of advanced surface analytical tools.

• Journal of Conservation Science
• /
• v.9 no.1
• /
• pp.11-20
• /
• 2000

The body composition of an ancient roofing tiles excavated from Chonnam province has been investigated by X-ray diffraction, and inductively coupled plasma spectroscopy. Ancient roofing tiles were excavated at ancient mountain fortress and kiln sites. The body composition of roofing tiles was different according to the excavated sites. The mineral component of roofing tiles were grouped in the five types and chemical composition was different according to the excavated areas. It is presumed that the body of roofing tiles used low-grade raw materials containing $Fe_2O_3$ 4-10%. The trace element composition of the roofing tiles were different, and it might be all ret1ection of different geological characteristics. The characteristic element of rooting tiles was vanadium element of the analyzed 20 trace elements. By $SiO_2-V$ distribution diagram types, roofing tiles excavated from the Geomdan mountain fortress at Sunchon, kiln site in Yeochon, Gorak and Cheoksan mountain fortress at Yeosu were grouped into the same excavated site.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.4
• /
• pp.602-611
• /
• 2013

We have investigated the influence of system composition and preparation conditions on the particle size of vitamin E acetate (VE)-loaded nanoemulsions prepared by PIC(phase inversion composition) emulsification. This method relies on the formation of very fine oil droplets when water is added to oil/surfactant mixture. The oil-to-emulsion ratio content was kept constant (5 wt.%) while the surfactant-to-oil ratio (%SOR) was varied from 50 to 200 %. Oil phase composition (vitamin E to medium chain ester ratio, %VOR) had an effect on particle size, with the smallest droplets being formed below 60 % of VOR. Food-grade non-ionic surfactants (Tween 80 and Span 80) were used as an emulsifier. The effect of f on the droplet size distribution has been studied. In our system, the droplet volume fraction, given by the oil volume fraction plus the surfactant volume fraction, was varied from 0.1 to 0.3. The droplet diameter remains less than 350 nm when O/S is fixed at 1:1. The droplet size increases gradually as the increasing the volume fraction. Particle size could also be reduced by increasing the temperature when water was added to oil/surfactant mixture. By optimizing system composition and homogenization conditions we were able to form VE-loaded nanoemulsions with small mean droplet diameters (d < 50 nm). The PIC emulsification method therefore has great potential for forming nanoemulsion-based delivery systems for food, personal care, and pharmaceutical applications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.8
• /
• pp.453-458
• /
• 2014

In this paper, we propose a stereo image composition method based on Poisson image editing. If we synthesize images without considering their depth values, it may lead to unwanted consequences. When we segment an image into its background and foreground regions using Grabcut, we take into account their geometric positions to mix color tones; thus, the image is composited more naturally. After synthesizing images, we apply a blurring operation around object boundaries; then, the foreground object and background are composited more seamlessly. In addition, we can adjust the distance of the object by setting arbitrary depth values and generating right color and depth images automatically. Experimental results show that the proposed stereo image composition method provides naturally synthesized stereo images. Improved portions were subjectively confirmed as well.

• Journal of the Semiconductor & Display Technology
• /
• v.4 no.1 s.10
• /
• pp.43-48
• /
• 2005

Metaloganic chemical vapor deposition, also known as metalorganic vapor phase epitaxy has become one of the main techniques for growing thin, high purity films for compound semiconductors such as GaAs, InP, and InGaAsP. In this study, the distribution of growth rate and composition of InGaAsP, InGaP, and InGaAs films are studied using computational method. The influences of process parameters such as pressure, temperature and precursors' partial pressure on the growth rate and composition distributions are analyzed. The film growth rate is increased in the upstream part according to the increase of temperature but not in the downstream part. The Ga composition in InGaAsP film shows an asymptotic behavior for temperature variation but As composition varies significantly within the temperature range considered in the present study. The overall film growth rates of InGaP, InGaAs and InGaAsP are decreased with increasing the Ga/In ratios of the source gases. Pressure variation does not seem to be a significant parameter to the film growth. Film growth characteristics of tertiary films such as InGaP and InGaAs show similar trends to the quaternary film, InGaAsP.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.6 s.134
• /
• pp.46-54
• /
• 2005

To make the composite panels of wood particles and recycled plastics, the recycled polypropylene was used. In the composite panels the sizes of wood particles were 1/32", 1/4" and 1/2" mesh, and the composition ratios of the recycled plastics were 10%, 30%, 50% and 70%. The physical and mechanical properties of the composite panels were investigated. As the composition ratio of wood particle increases, the density increases, while it decreases at the same composition ratio because the size of wood particle increases. As the composition ratio of recycled polypropylene increases from 10% to 30%, both thickness swelling and water adsorption significantly decrease. As the composition ratio of recycled polypropylene increases, the modulus of rupture in bending strength increases, but the modulus of elasticity in bending strength decreases. SEM shows that the dissolved recycled polypropylene penetrates into tracheid and pit, and bonds mechanically to other wood particle and matrix to increase the bonding strength and improve the physical and mechanical properties of composite panel.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.6543-6550
• /
• 2015

This study aimed to analyze the effect of flexi-bar exercise on in body composition and trunk muscle strength of female college students who are either overweight or obesity. The subjects were female college students divided into experimental group(N=15) and control group(N=15). The experimental group performed a flexi-bar exercise for of 30 minute sessions three days per week for five weeks, and the differences in body composition and trunk muscle strength before and after the experiment and between experimental group and control group were analyzed. The study results showed that the experimental group had a statistically significant improvement in the body fat mass and body fat percentage, body muscle mass, both arm muscle mass, trunk muscle mass, basal metabolic rate(p<.05). Changes in trunk muscle strength showed that the experimental group had statistically significant increased in changes in trunk muscle strength(p<.01). The study verified that flexi-bar exercise can be effective for improving the body composition and trunk muscle strength of overweight and obesity female college students.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.43 no.2
• /
• pp.109-116
• /
• 2010

This study investigated the effects of astaxanthin, which is used to improve the muscle color of fish, on the nutritional composition of rainbow trout (Oncorhynchus mykiss). The trout were fed extruded pellets containing astaxanthin (pigmented rainbow trout) or without astaxanthin (non-pigmented rainbow trout). No significant differences in the contents of crude protein and crude ash between the two muscles of the two groups were observed. However, the crude fat composition of the muscle of pigmented rainbow trout was about two times higher than that of control muscle. In the muscle of pigmented rainbow trout, the contents of docosahexaenoic acid (DHA, 22:6n-3) and eicosapentaenoic acid (EPA, 20:5n-3), which are functional polyunsaturated fatty acids, were 1.6 fold higher than in non-pigmented muscle. In addition, the contents of minerals such as Zn and Fe, vitamins (B group, C, and E), free amino acids, carotenoids and astaxanthin were increased in the muscle of rainbow trout fed pellets supplemented with astaxanthin. Specifically, the content of the bioactive compound astaxanthin, was increased six times in the pigmented muscle, as compared to the control muscle. The results suggest that a diet supplemented with astaxanthin improves the nutritional composition of rainbow trout muscle as well as improving the muscle color.

• Journal of Animal Science and Technology
• /
• v.51 no.6
• /
• pp.537-542
• /
• 2009

For a period of over 6 years, more than 160,000 milk samples were collected and analyzed to determine the influence of different seasonal temperatures and geographic regional location on milk composition in South Korea. Fat, protein, lactose, non fat milk solids (NFMS) and total solids (TS) contents were significantly higher among dairy cows milked in winter season than other seasons (p<0.05). In contrast, freezing point (FP), milk urea nitrogen (MUN) and somatic cell count (SCC) were significantly higher in summer season than other seasons (p<0.05). The average SCC in the autumn season was $358{\times}10^3$/ml, which was lower than any other seasons (p<0.05). These results may be due to the changes in temperature during different seasons. Meanwhile, milk produced by dairy cows in central region had higher fat, protein, lactose, NFMS, TS and MUN and had lower SCC compared to other regions (p<0.05). Fat, TS, FP, MUN and citric acid in northeast region were lower than other regions (p<0.05). The SCC was significantly higher in southeast region than those of other regions (p<0.05). As a result, it might be possible that the differences in feeding management in each different region may affect the milk composition. In conclusion, present results indicated that milk composition is clearly influenced by both season and regional location. Therefore, based on these results, development of different feeding systems, according to season and region is needed to produce high quality and satiable milk production.

• Food Science of Animal Resources
• /
• v.32 no.1
• /
• pp.6-12
• /
• 2012

The association of three candidate genes, fatty acid synthase (FASN), microsomal triglyceride transfer protein (MTTP) and fatty acid binding protein 3 (FABP3), with fatty acid (FA) composition in Duroc pigs was investigated. Identified single nucleotide polymorphisms (SNPs) were used for polymerase chain reaction-restriction fragment length polymorphism genotyping. The c.265C>T SNP of FASN gene was significantly associated with high levels of palmitoleic acid (C16:1) (p<0.05), oleic acid (C18:1) (p<0.01), and mono-unsaturated fatty acid (MUFA) (p<0.01), but low levels of linoleic acid (C18:2) (p<0.01), alpha linolenic acid (C18:3) (p<0.05), and poly-unsaturated fatty acid (PUFA) (p<0.01) in animals having the CT genotype. The c.2573T>C SNP in the MTTP gene had a significant effect only in elevating the level of palmitoleic acid (C16:1) (p<0.05) in heterozygote animals. The polymorphism in FABP3 showed no significant effects on any fatty acid composition traits. These results suggest that the identified SNPs in the FASN and MTTP genes can be useful markers for selecting Duroc pigs having desirable healthy fatty acid composition.