• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.12
• /
• pp.1677-1685
• /
• 2012

The autolysate and hydrolysate of a common squid liver, Todarodes pacificus, were prepared. Autolysis (liver ratio, pH, temperature) and Protamex-treated hydrolysis (pH, temperature, ratio of protease to liver) conditions were optimized by response surface methodology using central composite design for under 1 hr of hydrolysis time. The desirability profile indicated that maximum DH could be achieved at a squid liver of 93.5%, pH 6.4, and $47^{\circ}C$ in autolysis, while that of Protamex-treated hydrolysis did at a Protamex-to-squid liver level of 0.33%, pH 6.0, and $55^{\circ}C$. Three amino acids, proline, cysteine, and methionine, were not detected in the total amino acid composition of the Protamex-treated hydrolysate, while they were detected in the free amino acid composition. Cadmium was $8.32{\pm}0.03$ mg/100 g-powder for raw, $3.56{\pm}0.02$ mg/100 g-powder for the autolysate, and $13.26{\pm}0.04$ mg/100 g powder for the Protamex-treated hydrolysate. The major molecular weight ranged from 1.0 to 1.5 kDa for the autolysate and from 210 to 470 Da for the Protamex-treated hydrolysate. Food functionalities of the autolysate, such as surface hydrolphobicity, emulsion activity index, emulsion stability, water, and fat adsorption, were similar to the Protamex-treated hydrolysate. Both the autolysate and Protamex-hydrolysate showed high inhibitory activities on the angiotensin-I converting enzyme. Cell toxicity against the HepG2 cell line was not detected in the autolysate or the Protamex-treated hydrolysate by 200 ${\mu}g/mL$.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.1
• /
• pp.49-56
• /
• 2011

Purpose: The aim of this study was to evaluate the effect of mechanical, chemical surface treatments on the zirconia-to-resin cement shear bond strength (SBS). Materials and methods: Eighty zirconia discs (Lava, 3M ESPE) and eighty zirconia/alumina composite (Zirace, Acucera) were embedded in an epoxy resin base. Zirconia discs were randomly divided in to four treatment groups(10 for each manufacturer): $50\;{\mu}m$ $Al_2O_3$ sandblasting (S50), $110\;{\mu}m$ $Al_2O_3$ sandblasting (S110), $50\;{\mu}m$ $Al_2O_3$ and primer (Z-Prime Plus, Bisco Inc) (S50z) and $110\;{\mu}m$ $Al_2O_3$ and primer (Z-Prime Plus) (S110z). Two resin-based luting cements (Calibra, Panavia F) were used to build 2 mm diameter cylinders onto the zirconia. After 24 h of storage in water, SBS testing was evaluate using a universal testing machine. Bond strength data were analyzed with one-way ANOVA, two-way ANOVA test and post hoc comparison was done using Tukey test (${\alpha}$ = .05). Results: Groups using primer showed the high shear bond strength. The groups that did not use primer presented lower shear bond strengths. Conclusion: The use of primer (Z-Prime Plus, Bisco) had significantly higher shear bond strengths.

• Composites Research
• /
• v.29 no.4
• /
• pp.194-202
• /
• 2016

A graphene film, two-dimensional carbon sheet, is a promising material for future electronic devices and so on. In graphene applications, the effect of substrate on the atomic/electronic structures of graphene is significant, so we studied an interaction between graphene film and substrate. To study the effect, we investigated the graphene films grown on Ni substrate with two crystal face of (111) and (100) by Raman spectroscopy, comparing with graphene films transferred on $SiO_2/Si$ substrate. In our study, the doping effect caused by charge transfer from Ni or $SiO_2/Si$ substrate to graphene was not observed. The bonding force between graphene and Ni substrate is stronger than that between graphene and $SiO_2/Si$. The graphene films grown on Ni substrate showed compressive strain and the growth of graphene films is incommensurate with Ni (100) lattice. The position of 2D band of graphene synthesized on Ni (111) and (100) substrate was different, and this result will be studied in the near future.

• Composites Research
• /
• v.29 no.6
• /
• pp.408-413
• /
• 2016

Commonly-used polymers are manufactured as versatile forms. Furthermore, continuous polymer fibers are recently manufactured using nylon or aramid fiber. One of common epoxy was also used to make polymer fibers. Bisphenol-A type was used as base epoxy whereas amine and anhydride were used as hardeners. Epoxy fibers was cured by stepping up the temperature to maintain the shape of epoxy fiber. Surface energy was measured to confirm the degree of interfacial adhesion by modified static contact angle method. After mechanical properties were measured via fiber tensile test, the evaluation of fiber fracture was proceeded. Tensile strength of epoxy fiber using amine type hardener was higher as 138 MPa than anhydride case as 70 MPa. Fractured surface exhibited different failure patterns at the cross-section.

• Food Science and Preservation
• /
• v.13 no.2
• /
• pp.252-258
• /
• 2006

To find the optimum extraction condition of dried omija, central composite experimental design having three independent variable (extraction temperature, extraction time and water ratio) with five levels was conducted for response surface analysis. The maximum of soluble solid was predicted to the extraction conditions of over 25 fold water ratio, $7{\sim}8hr$ and $75^{\circ}C$. Total acid, total phenol, reducing sugar and vitamin C were predicted to respectively 30 fold water ratio, 6 hr, $70^{\circ}C$, 30 fold water ratio, $6{\sim}7\;hrs,\;80^{\circ}C$ and 30 fold water ratio, $6{\sim}8\;hr,\;80^{\circ}C$, 25 fold water ratio, $5{\sim}6hr,\;80^{\circ}C$ extraction condition. Turbidity of extraction condition. Turbidity of extraction condition was 7 over 25 ford water ratio and over $60^{\circ}C$. From the superimposing results of response variables, the optimum extraction condition was predicted 25 folds water ratio, 6 hr and $65{\sim}70^{\circ}C$.

• Journal of Technologic Dentistry
• /
• v.33 no.4
• /
• pp.349-357
• /
• 2011

Purpose: In this study, for the reasons of observing the changes when using bonding agent with Ni-Cr alloy and Co-Cr alloy and using VM13 and Vintage MP ceramic which have the disparity in coefficient of thermal expansion, it is carried out to evaluate the characteristics of the bonding agent through the analysis of the interface between metal and ceramic and the analysis of bond strength by variable. Methods: The surface treatment was performed on the two kinds of alloy(Ni-Cr alloy and Co-Cr alloy) specimens, which were sandblasted and were treated with bonder application. The metal-ceramic interfaces were analyzed with EPMA in order to ionic diffusion, and the shear test was performed. Results: As a result of observation of metal-ceramic interfacial properties, it was observed that Cr atoms were spread from the alloy body to the ceramic floor in the specimen of Group B. It was also seen that Cr, W atoms were spread from the alloy body to the ceramic floor in the specimen of Group S. In consequence of observing Shear bond strength, it was calculated that the specimen of BSV was 27.75(${\pm}11.21$)MPa, BSM was 27.02(${\pm}5.23$)MPa, BCV was 30.20(${\pm}5.99$)MPa, BCM was 27.94(${\pm}10.76$)MPa, SSV was 20.83(${\pm}2.58$)MPa, SSM was 23.98(${\pm}3.94$)MPa, SCV was 32.32(${\pm}4.68$)MPa, and SCM was 34.54(${\pm}10.63$)MPa. Conclusion: In the metal-ceramic interface of Bellabond plus sample group, diffusion of Cr atoms was incurred and diffusion of C Cr atoms and W atoms in the sample group of $Starloy{(R)}\;C$ was observed. Using bonding agent showed the higher bond strength than using the sand blasting treatment. In the Bellabond plus alloys, the specimen group with the use of binding materials showed higher shear bond strength, but didn't show statistically significant differences (p>0.05). In the $Starloy{(R)}\;C$ alloys, the specimen group with the use of binding materials showed higher shear bond strength and statistically significant differences(p<0.05). In terms of VM13 ceramic, it was in the Bellabond plus alloys that the high shear bond strength was showed, but there's no statistically significant differences(p>0.05). In terms of Vintage MP ceramic, it was in the $Starloy{(R)}\;C$ alloys that the high shear bond strength was showed and statistically significant differences(p<0.05). Metal-ceramic to fracture of the shear strength measurements and an analysis of all aspects of military usage fracture of the composite, respectively.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.2
• /
• pp.237-245
• /
• 2000

For the purpose of comparing the bond strengths of some tooth adhesive restoration materials on primary enamel and dentin, 4 kinds (7 brands) of restorative materials including a composite resin (Z 100), a conventional glass ionomer cement (Chem-Flex), 2 brands of resin-modified glass ionomer cements (Fuji II LC-I, Vitremer), and 3 brands of compomers(Dyract AP, F2000, Compoglass) were investigated using UTM for measuring the shear bond strengths. Additionally the failure modes were examined by histologically observing the fractured surfaces of each specimen. The following results were obtained. 1. The shear bond strengths of Z 100 to the primary enamel were higher than those of other experimental materials except Fuji II LC-I, which showed significantly higher bond strength than Chem-Flex or Vitremer (P<0.05). 2. The shear bond strengths of Z 100 to the primary dentin were higher than those of other experimental materials except Dyract AP and Fuji II LC-I, both of which showed significantly higher shear strength than Chem-Flex or Vitremer (P<0.05). 3. The shear bond strengths of all restorative materials except Dyract AP showed relatively higher values to enamel surface than to dentin surface. In Dyract AP, the reverse was true significantly. 4. All materials examined showed cohesive failures except some Chem-Flex and Vitremer, which showed adhesive failures.

• Composites Research
• /
• v.13 no.6
• /
• pp.1-8
• /
• 2000

The fabrication Process of $Al_2O_{3p}$/AC8A composites by pressureless infiltration technique and the effects of additive Mg content and volume fraction of particulate reinforcement on mechanical and wear properties were investigated. It was found that the bending strength decreased with increasing volume fraction of $Al_2O_{3p}$ particles. Whereas hardness increased with volume fraction of $Al_2O_{3p}$ particles. The decrement of strength in case of high volume fraction of $Al_2O_{3p}$ particles was attributed to high porosity level. In terms of additive Mg content, $Al_2O_{3p}$/AC8A composites containing around 5~7wt% of additive Mg indicated the highest strength, and hardness values increased with additive Mg contents. Wear resistance of AC8A alloy were improved by reinforcement of $Al_2O_{3p}$ particles especially at high sliding velocity. Wear property of $Al_2O_{3p}$/AC8A composites and AC8A alloy exhibited different aspects. $Al_2O_{3p}$/AC8A composites indicated more wear loss than AC8A alloy at slow velocity region. However a transition point of wear loss was found at middle velocity region which shows the minimum wear loss and wear loss at high velocity region exhibited almost same value as at slow velocity region, whereas wear loss of AC8A alloy almost linearly increased with sliding velocity. It was found that $Al_2O_{3p}$/AC8A composites containing $Al_2O_{3p}$ volume fraction of 20% exhibited abrasive wear surface regardless of sliding velocity and $Al_2O_{3p}$/AC8A composites containing $Al_2O_{3p}$ volume fraction of 40% showed slightly adhesive wear surface at low sliding velocity, and it progressed to severe wear as increasing the sliding velocity.

• Composites Research
• /
• v.27 no.6
• /
• pp.248-253
• /
• 2014

In this study, tapered double cantilever beam specimens are designed with the variable of angle to investigate the fracture property at the bonded surface of adjoint structure. These specimens are made with four kinds of models as the length of 200 mm and the slanted angles of bonded surfaces on specimens of $6^{\circ}$, $8^{\circ}$, $10^{\circ}$ and $12^{\circ}$. By investigating experiment and analysis result of these specimens, the maximum loads are happened at 120 N, 137 N, 154 N and 171 N respectively in cases of the specimens with slanted angles of $6^{\circ}$, $8^{\circ}$, $10^{\circ}$ and $12^{\circ}$. As the analysis result approach the experimental value, it is confirmed to have no much difference with the values of experiment and analysis. It is thought that the material property can be investigated effectively on shear behavior of the material composed of aluminum foam bonded with adhesive through simulation instead of experiment by applying this study method.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.4
• /
• pp.499-506
• /
• 2006

Response surface methodology was used to investigate the cookie manufacturing process with black rice flour. A three- variable, three-level central composite design was employed where the independent variables were the amount of black rice flour ($0{\sim}20%$), baking time ($10{\sim}14 min$), and sugar type (sucrose, aspartame and oligosaccarides). pHs of dough and cookie tended to increase with the addition of black rice flour. Moisture content of dough slightly increased with tile addition of black rice flour but nearly affected by baking time. Spread factor increased with the addition of black rice flour and it was more evident in the samples prepared with sucrose. L*-value decreased but a*-value increased significantly with the addition of black rice flour. Generally the amount of black rice flour in the sample did not affect the textural characteristics of cookie. As the amount of black rice and baking time increased, sensory flavor became stronger. Sensory sweetness as well as hardness increased but sensory color became darker with the addition of black rice flour. In addition, the response surface models developed in this study for most of physicochemical and sensory characteristics of black rice cookie were adequate.