• Steel and Composite Structures
• /
• v.46 no.5
• /
• pp.621-635
• /
• 2023

The combination of replaceable and repairable properties in structures has introduced new approach called "Low Damage Design Structures". These structural systems are designed in such a way that through self-centering, primary members and specific connections neither suffer damage nor experience permanent deformations after being exposed to severe earthquakes. The purpose of this study is the seismic assessment of steel moment resisting frames with the aid of rigid rocking cores. To this end, three steel moment resisting frames of 4-, 8-, and 12-story buildings with and without rocking cores were developed. The nonlinear static analysis and incremental dynamic analysis were performed by considering the effects of the vertical and horizontal components of 16 strong ground motions, including far-fault and near-fault arrays. The results reveal that rocking systems benefit from better seismic performance and energy dissipation compared to moment resisting frames and thus structures experience a lower level of damage under higher intensity measures. The analyses show that the interstory drift in structures equipped with stiff rocking cores is more uniform in static and dynamic analyses. A uniform interstory drift distribution leads to a uniform distribution of the bending moment and a reduction in the structure's total weight and future maintenance costs.

• Structural Engineering and Mechanics
• /
• v.84 no.5
• /
• pp.699-706
• /
• 2022

Settlement control techniques are critical for the safety of shield tunnel constructions, especially for facing complex situations. In this study, the shield tunnel structure from Huaita east road station to Heping Road station in Xuzhou metro No.3 line (China) is taken as engineering background, which has various complex problems of the upper-soft and lower-hard composite stratum conditions, twin curve shield tunnels, and underpass the foundation of the piled raft. The deformation characteristics of shield tunnelling passing through buildings are explored. Subsequently, comprehensive research methods of numerical simulation and field measurement are adopted to analyzing the effectiveness of settlement control by using the top grouting technique. The results show that the settlement of the buildings has obvious spatial characteristics, and the hysteresis effect can be obviously observed in soil deformation caused by shield construction. Meanwhile, the two shield constructions can cause repeated disturbances, reducing the soil deformation's hysteresis effect. Moreover, the shield tunnel's differential settlement is too large when a single line passes through, and the shield construction of the outer curve can cause more significant disturbance in the tunnel than the inside curve. Notably, the proposed process control parameters and secondary topgrouting method can effectively control the deformation of the shield tunnel, especially for the long-term deformation.

• Journal of Sport and Applied Science
• /
• v.8 no.2
• /
• pp.13-18
• /
• 2024

Purpose: The purpose of this study is to determine the effects of a 6-week weight training and complex training program on the Y-balance test (YBT) in high school soccer players. Research design, data, and methodology: This study included 26 high school soccer players from City S. Subjects were divided into a weight training group (WTG: n=13) and a complex training group (CTG: n=13) based on their willingness to participate without medical problems. The YBT measured anterior (AT), posteromedial (PM), posterolateral (PL), and composite scores (CS), and was measured twice: before the start and after the end of training. The data were analyzed using the SPSS 25.0 statistical program to compare pre- and post-training using paired-t tests, between training groups using independent-t tests, and left-right comparisons using independent-t tests. Results: Training resulted in a significant pre- to post-training change in PL in the left foot WTG group (p<.05), with no significant change in the other measures. There were no significant differences between training groups and between left and right sides. Conclusion: To improve YBT in high school soccer players, a program to improve ankle and hip mobility and strength should be added along with improving large muscle strength through weights and comflex training.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.4
• /
• pp.623-631
• /
• 2007

Effect of Soft-start curing on the contraction stress of composite resin restoration polymerized with LED and plasma curing unit The purpose of this study was to evaluate the influence of soft-start light curing on contraction stress and hardness of composite resin. Composite resin (Filtek $Z-250^{TM}$, 3M ESPE, USA) was cured using the one-step continuous curing method with three difference light sources ; conventional halogen light ($XL3000^{TM}$, 3M ESPE, USA) cure for 40 seconds at $400 mw/cm^2$, LED light (Elipar Freelight $2^{TM}$, 3M-ESPE, USA) cure for 20 seconds at $800\;mW/cm^2$ a and plasma arc light ($Flipo^{TM}$, LOKKI, France) cure for 12 seconds at $1300 mW/cm^2$. For the soft-start curing method ; LED light (Elipar Freelight $2^{TM}$, 3M-ESPE, USA) cure exponential increase with 5 seconds followed by 17 seconds at $800\;mW/cm^2$ and plasma arc light ($Flipo^{TM}$, LOKKI, France) cure 2 seconds light exposure at $650\;mW/cm^2$ followed by 11 seconds at $1300\;mW/cm^2$. The strain guage method was used for determination of polymerization contraction. Measurements were recorded at each 2 second for the total of 800 seconds including the periods of light application. Obtained data were analyzed statically using Repeated measures ANOVA, One way ANOVA, and Tukey test. The results of present study can be summarized as follows: 1. Composite resin restoration showed transient expansion just after irradiation of curing light. Contraction stress was increased rapidly at the early phase of polymerization and reduced slowly as time elapsed (P<0.05). 2. Contraction stress was not revealed significant difference between Halogen curing light groups and LED and Plasma Light curing with soft-start group (P>0.05). 3. LED and Plasma Light curing with soft-start showed lower contraction stress than the one-step continuous light curing (P<0.05).

• Management & Information Systems Review
• /
• v.29 no.4
• /
• pp.23-44
• /
• 2010

This study examines the value-relevance of accruals and discretionary accruals. Also, by examining the effects of the corporate life-cycle on these relationship, this study is able to provide evidence of the value-relevance of accruals and discretionary accruals measures in the economic context of life-cycle theory. This study uses results based on life-cycle classification methods developed by Anthony and Ramesh(1992), adjust Jones model and Dechow Dechev(2002) model. We classify firms using individuals variables(sales growth, capital expenditure growth, employee growth) and then use a composite score obtained from all variables for classification. Our sample consists of 272 firms listed in the Korean Stock Exchange during 14 years(1996-2009). Our final sample for regression variables consists of 2,448 firm-year observations. This evidence implies that the value-relevance of accruals and discretionary accruals in the growth and mature stage can have positive impact on the price but in the decline the value-relevance of accruals and discretionary accruals can have negative impact on the price. The results mean that discretionary accruals communicate managements' private information in the growth stage, but. earnings management in the decline stage. The results of this study suggest that corporate life cycle stages influence the value-relevance of accruals and discretionary accruals measures.

• Journal of Korean Society of Transportation
• /
• v.32 no.2
• /
• pp.93-105
• /
• 2014

This study evaluated the relative efficiency of mobile emission reduction countermeasures through a Data Envelopment Analysis (DEA) approach and determined the priority of countermeasures based on the efficiency. Ten countermeasures currently applied for reducing greenhouse gases and air pollution materials were selected to make a scenario for evaluation. The reduction volumes of four air pollution materials(CO, HC, NOX, PM) and three greenhouse gases($CO_2$, $CH_4$, $N_2O$) for the year 2027, which is the last target year, were calculated by utilizing both a travel demand forecasting model and variable composite emission factors with respect to future travel patterns. To estimate the relative effectiveness of reduction countermeasures, this study performed a super-efficiency analysis among the Data Envelopment Analysis models. It was found that expanding the participation in self car-free day program was the most superior reduction measurement with 1.879 efficiency points, followed by expansion of exclusive bus lanes and promotion of CNG hybrid bus diffusion. The results of this study do not represent the absolute data for prioritizing reduction countermeasures for mobile greenhouse gases and air pollution materials. However, in terms of presenting the direction for establishing reduction countermeasures, this study may contribute to policy selection for mobile emission reduction measures and the establishment of systematic mid- and long-term reduction measures.

• Journal of Korea Water Resources Association
• /
• v.39 no.2 s.163
• /
• pp.161-178
• /
• 2006

Heathcote (1998) identified a systematic, seven-step approach to general watershed planning and management. It consists of 1) understanding watershed components and processes, 2) identifying and ranking problems to be solved, 3) setting clear and specific goals, 4) developing a list of management options, 5) eliminating infeasible options 6) testing the effectiveness of remaining feasible options, and 7) developing the final options. In this study the first five steps of that process were applied to the Anyangcheon watershed in Korea, which experiences streamflow depletion, frequent flood damages, and poor water quality typical of highly urbanized watersheds. This study employed four indices: Potential Flood Damage(PFD), Potential Streamflow Depletion(PSD), Potential Water Quality Deterioration(PWQD) and Watershed Evaluation Index(WEI) to identify and quantify problems within the watershed. WEI is the integration index of the others. Composite programming which is a method of multi-criteria decision making is applied for the calculation of PSD, PWQD and WEI (Step 2). The primary goal of the study is to secure instreamflow in the Anyangcheon during dry seasons. The second management goals of flood damage mitigation and water quality enhancement are also set (Step 3). Management options include not only structural measures that can alter the existing conditions, but also nonstructural measures that rely on changes in human behavior or management practices (Step 4). Certain management options which are not technically, economically, and environmentally feasible, are eliminated (Step S). Therefore, this study addresses a Pre-feasibility study, which established a master plan using Steps 1 through 5.

• Journal of Navigation and Port Research
• /
• v.31 no.1 s.117
• /
• pp.1-6
• /
• 2007

The evaluation of safety of simulated maneuvers is frequently analysed by so called goal-line or point of interest in Korea. For the purpose of warning the risk in the proximity measure composed of only the goal-line analysis, this paper utilized Korea Institute of Maritime and Fisheries Technology(KIMFT) which houses a real-time, full-mission shiphandling simulator to examine the goal-line and in-length analyses in the outbound channel of Kwangyang port as an example. It used a 15,000 TEU container ship as a model under environmental conditions of the northwestly 26-knot wind and 2.2-knot ebb current. The result of two analyses showed the probability invading the channel boundary obtained by the goal-line analysis is a little greater than that of the in-length analysis. Therefore it was acknowledged that the proximity measure by the goal-line analysis alone may be followed by some risk. In addition, this paper was to suggest the closest distance to channel boundary from the ship's edge as one of proximity measures, instead of using the ship's deviation from the centerline of channel.

• Journal of Ocean Engineering and Technology
• /
• v.12 no.1
• /
• pp.23-31
• /
• 1998

Kind 1 propeller shaft in ships is the shaft which is provided with effective measures against corrosion by sea water, or the shaft which is made of approved corrosion resistance materials. The propeller shaft other than specified above is Kind 2. Thus, this study is mainly concerned with the resistance to fatigue damage in sea water against stress concentrations due to the notches. The results obtained can be summarized as follows; (1) The stress increases with curing time, however, when the curing time reaches at 96 hours the stress becomes a constant value. The elongation decreases with curing time, however, when the curing time reaches at 48 hours the elongation becomes a constant value. Thus, in case of FRP coating on propeller shaft, it is necessary to cure for 48 hours at least. (2) The relation of $\sigma$$_n$-K$_t$ is to be classified into two parts, which is a part where fracture nominal stress, $\sigma$$_n$, decreases with increasing $K_t$, and a part where $\sigma$$_n$ is nearly constant independent of $K_t$. (3) According to a linear notch mechanics, the measure of severity controlling the fracture in notched FRP body is the notch root radius, $\rho$. The notched static strength of an arbitrary specimen will be estimated from $\sigma$$_{max}$ -1/$\rho$ curve. (4) Through the observation of cross section after fatigue test, the part of interface was kept good condition irrespective of loading conditions.

• Health Policy and Management
• /
• v.7 no.1
• /
• pp.155-182
• /
• 1997

Objectives : This study was designed to compare North Korea and South Korea in measures of the quality of life (physical quality of life index and human development index) and to investigate the impact of selected medical and socioeconomic factors on PQL variables. Data and Methods : The World Bank, the United Nations Development Programme, and Population Reference Bureau were the principal sources of statistical data of 121 countries. Variables included infant mortality, life expectancy at birth, literacy rate, secondary school enrollment (male and female), GNP per capita, population per doctor, daily calorie supply per capita, and a composite PQL index. The Ordinary Least Square model was employed for cross-countries analysis. Findings : Both countries under quite different political and economic systems saw big improvememts in the quality of life, reducing mortality and prolonging life expectancy during the past three decades. In recent decad, however, North Korea has experienced abrupt exacerbation in the quality of life. Significant improvements in infant mortality of the population wer attributable mainly to GNP per capita and the secondary school enrollemt of female. The principal predictors of life expectancy at birth were population per doctor, infant mortality, and literacy rate. The secondary school enrollment of female and population per doctor were significantly associated with improvements in the physical quality of life index (PQLI). Conclusion : The results of this study confirmed a point illustrated by other studies : The association between quality of life as a measure of health status and socioeconomic factors was strong and positive. The important contribution of educational attainment in general, female education level in particular to improvements in the quality of life deserves good news for building an integrated health care system in the reunified Korea, taking into account the high level of education two koreas are enjoying. Meanwhile, when a sharp drop in the quality of life has been observed in North Korea under serious economic difficulties and food shortage in recent decade, the significant contribution of economic development to improvements in the quality of life poses bad nows for reunifying Korean health care in economic terms.