• Advances in nano research
• /
• v.15 no.5
• /
• pp.467-484
• /
• 2023

Despite the significant features of fiber-reinforced cementitious composites (FRCCs), including better mechanical, fractural, and durability performance, their high content of cement has restricted their use in the construction industry. Although ground granulated blast furnace slag (GGBFS) is considered the main supplementary cementitious material, its slow pozzolanic reaction stands against its application. The addition of nano-sized mineral modifiers, including nano-silica (NS), is an alternative to address the drawbacks of using GGBFS. The main object of this empirical and numerical research is to examine the effect of NS on the strain-hardening behavior of cementitious composites; ten mixes were designed, and five levels of NS were considered. This study proposes a new method, using a four-point bending test to assess the use of nano-silica (NS) on the flexural behavior, first cracking strength, fracture energy, and micromechanical parameters including interfacial friction bond strength and maximum bridging stress. Digital image correlation (DIC) was used for monitoring the initiation and propagation of the cracks. In addition, to attain a deep comprehension of fiber/matrix interaction, scanning electron microscope (SEM) analysis was used. It was discovered that using nano-silica (NS) in cementitious materials results in an enhancement in the matrix toughness, which prevents multiple cracking and, therefore, strain-hardening. In addition, adding NS enhanced the interfacial transition zone between matrix and fiber, leading to a higher interfacial friction bond strength, which helps multiple cracking in the composite due to the hydrophobic nature of polypropylene (PP) fibers. The findings of this research provide insight into finding the optimum percent of NS in which both ductility and high tensile strength of the composites would be satisfied. As a concluding remark, a new criterion is proposed, showing that the optimum value of nano-silica is 2%. The findings and proposed method of this study can facilitate the design and utilization of green cementitious composites in structures.

• Journal of Korea Trade
• /
• v.27 no.5
• /
• pp.167-198
• /
• 2023

Purpose - This paper aims to compare and analyze the co-movements and information spillover effects between the international commodity futures markets and the South Korean stock markets during the COVID-19 and the 2008 financial crises. Design/methodology - The DCC-GARCH model is used in the co-movements analysis. In contrast, the BEKK-GARCH model is used to evaluate information spillover effects. The statistical data used is from January 1, 2005, to December 31, 2022. It comprises the Korea Composite Stock Price Index data and daily international commodity futures prices of natural gas, West Texas Intermediate crude oil, gold, silver, copper, nickel, soybean, and wheat. Findings - The results of the co-movement analysis were as follows: First, it was shown that the co-movements between the international commodity futures markets and the South Korean stock markets were temporarily strengthened when the COVID-19 and 2008 financial crises occurred. Second, the South Korean stock markets were shown to have high correlations with the copper, nickel, and crude oil futures markets. The results of the information spillover effects analysis are as follows: First, before the 2008 financial crisis, four commodity futures markets (natural gas, gold, copper, and wheat) were shown to be in two-way leading relationships with the South Korean stock markets. In contrast, seven commodity futures markets, except for the natural gas futures market, were shown to be in two-way leading relationships with the South Korean stock markets after the financial crisis. Second, before the COVID-19 crisis, most international commodity futures markets, excluding natural gas and crude oil future markets, were shown to have led the South Korean stock markets in one direction. Third, it was revealed that after the COVID-19 crisis, the connections between the South Korean stock markets and the international commodity futures markets, except for natural gas, crude oil, and gold, were completely severed. Originality/value - Useful information for portfolio strategy establishment can be provided to investors through the results of this study. In addition, it is judged that financial policy authorities can utilize the results as data for efficient regulation of the financial market and policy establishment.

• Steel and Composite Structures
• /
• v.49 no.2
• /
• pp.143-159
• /
• 2023

Recently, the design of scaffolding systems has garnered considerable attention due to the increasing number of scaffold collapses. These incidents arise from the underestimation of imposed loads and the site-specific conditions that restrict the application of lateral restraints in scaffold assemblies. The present study is committed to augmenting the buckling resistance of vertical support members, obviating the need for supplementary lateral restraints. To achieve this objective, experimental and computational analyses were performed to assess the axial load buckling capacity of steel props, composed of two hollow steel pipes that slide into each other for a certain length. Three full-scale steel props with various geometric properties were tested to construct and validate the analytical models. The total unsupported length of the steel props is 6 m, while three pins were installed to tighten the outer and inner pipes in the distance they overlapped. Finite Element (FE) modeling is carried out for the three steel props, and the developed models were verified using the experimental results. Also, theoretical analysis is utilized to verify the FE analysis. Using the FE-verified models, a parametric study is conducted to evaluate the effect of different inserted pipe lengths on the steel props' axial load capacity and lateral displacement. Based on the results, the typical failure mode for the studied steel props is global elastic buckling. Also, the prop's elastic buckling strength is sensitive to the inserted length of the smaller pipe. A threshold of minimum inserted length is one-third of the total length, after which the buckling strength increases. The present study offers a prop with enhanced buckling resistance and introduces an equation for calculating an equivalent effective length factor (k), which can be seamlessly incorporated into Euler's buckling equation, thereby facilitating the determination of the buckling capacity of the enhanced props and providing a pragmatic engineering solution.

• Journal of Industrial Convergence
• /
• v.21 no.11
• /
• pp.147-154
• /
• 2023

This study aimed to investigate the relationship between the general characteristics of adolescents and their mental health in relation to experiences of heavy drinking. The research utilized raw data from the 18th Youth Health Behavior Online Survey (2022), focusing on 530 participants who reported experiencing heavy drinking in the past 30 days. The study applied weighted composite sample analysis, incorporating frequency, chi-square test, and logistic regression to examine the data. According to the research findings, experiences of heavy drinking showed statistically significant differences across variables such as gender, academic achievement, economic status, sexual experience, and smoking. Additionally, among the mental health characteristics, stress perception, depression, loneliness, suicidal thoughts, suicide planning, and suicide attempts were identified as influencing factors on heavy drinking experiences. These results underscore the need for prevention programs addressing alcohol consumption habits, considering the mental and physical health of adolescents. Developing programs that take into account the relationship between mental health and drinking habits can contribute to forming healthy lifestyle habits during adolescence.

• The Journal of Advanced Prosthodontics
• /
• v.16 no.2
• /
• pp.77-90
• /
• 2024

PURPOSE. The study aims to investigate the influence of the ferrule effect and types of posts on the stress distribution in three morphological types of the maxillary central incisor. MATERIALS AND METHODS. Nine models were created for 3 maxillary central incisor morphology types: "Fat" type - crown 12.5 mm, root 13 mm, and buccolingual cervical diameter 7.5 mm, "Medium" type - crown 11 mm, root 14 mm, and buccolingual cervical diameter 6.5 mm, and "Slim" type - crown 9.5 mm, root 15 mm, and buccolingual cervical diameter 5.5 mm. Each model received an anatomical castable post-and-core or glass-fiber post with resin composite core and three ferrule heights (nonexistent, 1 mm, and 2 mm). Then, a load of 14 N was applied at the cingulum with a 45° slope to the long axis of the tooth. The Maximum Principal Stress and the Minimum Principal Stress were calculated in the root dentin, crown, and core. RESULTS. Higher tensile and compression stress values were observed in root dentin using the metallic post compared to the fiber post, being higher in the slim type maxillary central incisor than in the medium and fat types. Concerning the three anatomical types of maxillary central incisors, the slim type without ferrule height in mm presented the highest tensile stress in the dentin, for both types of metal and fiber posts. CONCLUSION. Post system and tooth morphology were able to modify the biomechanical response of restored endodontically-treated incisors, showing the importance of personalized dental treatment for each case.

• Steel and Composite Structures
• /
• v.50 no.1
• /
• pp.1-13
• /
• 2024

The objective of this research is to study experimentally and numerically the behavior of steel beam columns with openings. Although the presence of openings in the beam columns is inevitable, finding ways to maintain strength is crucial. The studied parameters are opening shape, the ratio between opening height to specimen height, the percentage of opening location from support to beam column length, and web slenderness. Experimental tests are conducted including twelve specimens to study the effect of these parameters and record failure load, load deflection curve, and stress strain curve. Two failure modes are observed: local and flexural buckling. Interaction curves plotted from finite element model analysis are also used to expand the parametric study. Changing the location of the opening can decrease failure load by up to 7% and 60% in both normal and moment ratios respectively. Increasing the opening dimension can lead to a drop in the axial ratio by up to 29% and in the moment ratio by up to 74%. The weakest beam column behavior is noticed in specimens with rectangular openings which results from uneven and concentrated stresses around the opening. The main results of this research illustrate that the best location for opening is at 40% - 50% from beam column support. Also, it is advisable to use circular openings instead of rectangular openings in specimens having slender webs because moment ratios are raised by 85% accompanied by a rise in normal ratios by 9%.

• Steel and Composite Structures
• /
• v.50 no.1
• /
• pp.107-122
• /
• 2024

Following an internal column failure, adjacent double-span beams above the failed column will play a critical role in the load transfer and internal force redistribution within the remaining structure, and the span-to-depth ratios of double-span beams significantly influence the structural resistance capacity against progressive collapse. Most existing studies have focused on the collapse-resistant performances of single-story symmetric structures, whereas limited published works are available on the collapse resistances of multi-story steel frames with unequal spans. To this end, in this study, numerical models based on shell elements were employed to investigate the structural behavior of multi-story steel frames with unequal spans. The simulation models were validated using the previous experimental results obtained for single- and two-story steel frames, and the load-displacement responses and internal force development of unequal-span three-story steel frames under three cases were comprehensively analyzed. In addition, the specific contributions of the different mechanism resistances of unequal-span, double-span beams of each story were separated quantitatively using the energy equilibrium theory, with an aim to gain a deeper level of understanding of the load-resistance mechanisms in the unequal-span steel frames. The results showed that the axial and flexural mechanism resistances were determined by the span ratio and linear stiffness ratio of double-span beams, respectively.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.51 no.2
• /
• pp.132-139
• /
• 2024

This study aimed to compare the fluoride-releasing ability and degree of microbial attachment of a newly developed glass-hybrid restorative material (GH) with those of a high-viscosity glass ionomer (HvGIC), resin-modified glass ionomer (RMGI), and composite resin (CR). In addition, the correlation between fluoride-releasing ability and microbial attachment between materials was evaluated. Specimens were prepared in a disc shape and divided into 4 groups according to the materials (GH, HvGIC, RMGI, and CR). The fluoride release experiments were performed in each group (n = 15). The amount of fluoride released was measured on days 1, 3, 7, 14, 28, and 42 after storage. For the microbial attachment experiment, 12 specimens were produced per group using Mutans Streptococci (S.mutans ), a cariogenic microorganism. S. mutans was cultured on the specimens for 24 hours, and the number of bacteria was measured. GH had the highest cumulative fluoride release and showed a significant difference when compared with RMGI (p = 0.001) and CR (p < 0.0001). Microbial attachment was the lowest in GH; however, no significant difference was observed between the materials (p = 0.169). There was no significant correlation between fluoride release from materials and microbial attachment (p > 0.05). From this perspective, remineralization of low-mineralized areas could be expected due to the high fluoride release of GH, and the effect of delaying the progression of dental caries could be predicted from the low cariogenic microbial attachment. Therefore, GH might be a useful restorative material for treating immature permanent teeth with hypomineralized enamel. However, further studies are needed about the degree of remineralization of hypomineralized areas after restoration and the capacity to recharge fluoride.

• Korean Journal of Materials Research
• /
• v.34 no.6
• /
• pp.309-314
• /
• 2024

The structure and magnetic properties of composite powders prepared by ball milling a mixture of Fe₂O₃·(0.4-1.0)Fe were investigated. Hysteresis loops and differential scanning calorimetry (DSC) curves are used to characterize the materials and to examine the effect of the solid state reaction induced by ball milling. The results showed that a solid state reaction in Fe₂O₃·(0.4-1.0)Fe clearly proceeds after only 1 h of ball milling. The system is characterized by a positive reaction heat of +2.23 kcal/mole. The diffraction lines related to Fe₂O₃ and Fe disappeared after 1 h of ball milling and, instead, diffraction lines of the intermediate phase of Fe₃O₄ plus FeO formed. The magnetization and coercivity of the Fe₂O₃·0.8Fe powders were changed by the solid state reaction process of Fe₂O₃ by Fe during ball milling. The coercivity of the Fe₂O₃·0.8Fe powders increased with increasing milling time and reached a maximum value of 340 Oe after 5 h of ball milling. This indicates the grain size of Fe₃O₄ was clearly reduced during ball milling. The magnetic properties of the annealed powders depend on the amount of magnetic Fe and Fe₃O₄ phases.

• Journal of the Korean Applied Science and Technology
• /
• v.40 no.4
• /
• pp.606-615
• /
• 2023

The purpose of this study was to investigate the effect of increasing weight load on the dynamic balance on Y-balance Test(YBT). 18 male and female adults in their 20-30s (age: 23.17±1.72 years, height: 172.46±9.84 cm, weight: 73.39±11.44 kg, leg length: 88.89±5.69 cm) participated in the experiment. To measure the dynamic balance, the YBT was used to measure the reach distance, composite score, and COP variables to derive the results. As a result of the study, dynamic balance was improved in weight load in posteromedial and posterolateral reach and overall score during YBT. As a result of COP, anteroposterior amplitude, left and right COP velocity, and COP area during anterior reach improved dynamic balance in weight load in the right foot, but there was no difference during the posteromedial reach, ML amplitude in the left foot, AP COP velocity in left foot, ML COP velocity and COP velocity in both foot, and COP area in both foot improved dynamic balance when weight load during posterolateral reach.