• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.294-294
• /
• 2022

In 2013, the Asian Development Bank classified the Philippines among the countries facing high food security risks. Evidence has suggested that climate change has affected agricultural productivity, and the effect of extreme climatic events notably drought has worsened each year. This had resulted in serious hydrological repercussions by limiting the timely water availability for the agriculture sector. Laguna is the 3^rd most populated province in the country, and it serves as one of the food baskets that feed the region and nearby provinces. In addition to climate change, population growth, rapid industrialization, and urban encroachment are also straining the delicate balance between water demand and supply. Studies have projected that the province will experience less rainfall and an increase in temperature, which could simultaneously affect water availability and crop yield. Hence, understanding the composite threat of climate change for crop yield and water consumption is imperative to devise mitigation plans and judicious use of water resources. The water footprint concept elaborates the water used per unit of crop yield production and it can approximate the dual impacts of climate change on water and agricultural production. In this study, the water footprint (WF) of six main crops produced in Laguna were estimated during 2010-2020 by following the methodology proposed by the Water Footprint Network. The result of this work gives importance to WF studies in a local setting which can be used as a comparison between different provinces as well as a piece of vital information to guide policy makers to adopt plans for crop-related use of water and food security in the Philippines.

• Steel and Composite Structures
• /
• v.45 no.3
• /
• pp.437-454
• /
• 2022

Elliptic-braced simple resisting frame as a new lateral bracing system installed in the middle bay of frame in building facades has been recently introduced. This system not only creates a problem for opening space from the architectural viewpoint but also improves the structural behavior. Despite the researches on the seismic performance of lateral bracing systems, there are few studies performed on the effect of the stiffness parameters on the elastic story drift and calculation of period in simple braced steel frames. To overcome this shortcoming, in this paper, for the first time, an analytical solution is presented for calculating elastic lateral stiffness in a simple steel frame equipped with elliptic brace subjected to lateral load. In addition, for the first time, in this study, a precise formulation has been developed to evaluate the elastic stiffness variation in a steel frame equipped with a two-dimensional single-story single-span elliptic brace using strain energy and Castigliano's theorem. Thus, all the effective factors, including axial and shear loads as well as bending moments of elliptic brace could be considered. At the end of the analysis, the lateral stiffness can be calculated by an improved and innovative relation through the energy method based on the geometrical properties of the employed sections and specification of the used material. Also, an equivalent element of an elliptic brace was presented for the ease of modeling and use in linear designs. Application of the proposed relation have been verified through a variety of examples in OpenSees software. Based on the results, the error percentage between the elastic stiffness derived from the developed equations and the numerical analyses of finite element models was very low and negligible.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.4
• /
• pp.125-132
• /
• 2007

The oedometer, radial CRS and Rowe cell tests, composite discharge capacity tests and smear effect tests are carried out to estimate the parameters for the reliability-based design of vertical drain method. Also the sensitivity analysis, the probabilistic and deterministic solutions of radial consolidation theory are presented. The result of probabilistic analysis was compared to that of deterministic analysis using the tested and estimated parameters. The results indicated that the drain spacing in the deterministic method is larger than that in the probabilistic method because the former does not consider the uncertainties in the geotechnical property. The divergence of two methods is dependent on the probability of achieving target degree of consolidation by a given time and the coefficient of variation (COV) of the coefficient of horizontal consolidation ($c_h$).

• Journal of the Korean Geotechnical Society
• /
• v.26 no.6
• /
• pp.39-44
• /
• 2010

In case of the design method, which is used in the inside and outside of the country, on corrugated multi plate structures, section modulus would be determined by assuming 2-dementioanl equivalent section of those structures. However, it is impossible to consider 3-dimentional effects when 2-dimentional design method is applied since structures are reinforced with a pattern of the 1200, 1600 mm reinforcements except the 800 mm reinforcement. Thus, in this study, technical specification standard is analyzed for the existing corrugated multi plate design methods, and section strengths, moments, and so on of equivalent and practical sections are compared and estimated using 3-dimentional FEM (finite element method) for semicircles and architectural features widely used. Based on the results of that analysis, analytical basis for 3-dimentional design of the CBS-RIB is suggested.

• Composites Research
• /
• v.22 no.2
• /
• pp.1-6
• /
• 2009

The mechanical characteristics of gamma-ray irradiated UHMWPE specimens were investigated under various heat treatment conditions. The heat treatment was performed in the range of annealing and remelting temperatures. The annealing treatment below the temperature of $130^{\circ}C$ hardly induced changes in the tensile strength, the strain at the failure and the hardness. However the remelting treatment above $140^{\circ}C$ deteriorated those mechanical properties. It was shown in an FTIR analysis that the annealing treatment caused some oxidation of free radicals created by the pretreatment of the irradiation. These quantitative data represented by the behavior of mechanical properties might be used as basic informations for the design and analysis of various artificial joints.

• Composites Research
• /
• v.19 no.6
• /
• pp.16-22
• /
• 2006

The puncture properties under various conditions were investigated for the optimum conditions to yield the best properties. Fiber aspect ratio(AR: length of fiber/diameter of fiber), interphase condition and fiber content were considered as variables which impact the puncture force and friction force. The puncture force of short-fiber reinforced rubber increases up to 3.4 times compared to the virgin material. The better interphase condition shows the higher puncture force at given fiber AR and fiber content. The friction force of the matrix and reinforced rubber with a fiber AR below 155 does not exist. The friction force of the reinforced rubber with the good interphase condition and high fiber AR is higher than puncture force of matrix. Overall, it was found that the interphase condition, fiber AR and fiber content have an important effect on the puncture properties.

• Composites Research
• /
• v.19 no.4
• /
• pp.1-6
• /
• 2006

The effects of aging on fatigue of PSF/AS4 laminates tvas studied using the new energy release rate analysis. The analysis by the variational mechanics has been useful in providing fracture mechanics interpretation of matrix microcracking in cross-ply laminates. This paper describes the changes of the critical energy release rate ${\Delta}Gmc$(microcracking toughness) about the variation of the aging period during fatigue loading. The master plot by modified Pans-law gives a characterization of a material system's resistance to microcrack formation. PSF/AS4 $[0/902]_s$ laminates were aged at four different temperatures based on the glass transition temperature for 60 days. At all temperatures, the toughness decreased with aging time. The decrease of the toughness at higher temperature was faster than at lower temperature. To assess the effects of aging on fatigue, the unaged laminates were compared with the laminates which were aged for 60 days at $170^{\circ}C$ near $180^{\circ}C\;T_g$. The slope of dD/dN versus A 6u, of the aged laminates was lower than that of the unaged laminates. There was a significant shift of the aged data to formation of microcracks at the lower values of ${\Delta}G_m$.

• Composites Research
• /
• v.20 no.6
• /
• pp.1-7
• /
• 2007

Expanded graphite/carbon fiber hybrid conductive polymer composites were fabricated by the preform molding technique. The conductive fillers were mechanically mixed with a phenol resin to provide an electrical property to composites. The conductive filler loading was fixed at 60wt.% to accomplish a high electrical conductivity. Expanded graphites were excellent in forming a conductive networking by direct contacts between them while it was hard to get the high flexural strength over 40MPa with using only expanded graphite and phenol resin. In this study, carbon fibers were added in composites to compensate the weakened flexural strength. The effect of carbon fibers on the mechanical and electrical properties was examined according to the weight ratio of carbon fiber. As the carbon fiber ratio increased, the flexural strength increased until the carbon fiber ratio of 24wt.%, and then decreased afterward. The electrical conductivity gradually decreased as the increase of the carbon fiber ratio. This was attributed to the non-conducting regions generated among the carbon fibers and the reduction of the direct contact areas between expanded graphites.

• Composites Research
• /
• v.20 no.5
• /
• pp.20-25
• /
• 2007

Cyclic heating method is useful method for measuring the thermal diffusivity of porous materials. The main object of this paper is to develop and verify the thermal diffusivity measuring system of porous materials under vacuum condition. To verify this method, thermal diffusivities of the alumina ($Al_2O_3$) specimen and polystyrene foam were measured. Thermal diffusivities of these specimens were agreed with reference values. Thermal diffusivities of carbon/epoxy and porous insulation material were measured at atmospheric room temperature condition and vacuum condition respectively. Thermal diffusivities of carbon/epoxy and porous insulation material under vacuum are reduced by 66.4% and 64.9% compared to the thermal diffusivities under the atmospheric condition. These differences are considered the effect of the porous insulation material with an air.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.51.1-51.1
• /
• 2019

At the commissioning phase of KVN from 2009 to 2013, single-dish survey and monitoring observations were performed toward about 1000 evolved stars and about 60 relatively strong SiO and H2O maser sources respectively. Based on these single-dish results and VLBI feasibility test observations at K/Q/W/D bands in 2014, KVN Key Science Project (KSP) has started from 2015 and will be completed in 2019 as KSP phase I. Here we present the overview of observational studies on evolved stars using KVN. In KSP phase I, we have focused on nine KSP sources which show a successful astrometrically registered maps of SiO and H2O masers using the source frequency phase referencing method. We aim at investigating the spatial structure and dynamical effect from 43/42/86/129 GHz SiO to 22 GHz H2O maser regions associated with a stellar pulsation and development of asymmetry in circumstellar envelopes. Using the combined network KaVA (KVN+Japanese VLBI network VERA), KaVA Large Program titled on "Expanded Study on Stellar Masers: ESTEMA Phase I" was performed from 2015 to 2016. Based on ESTEMA Phase I, EAVN Large Program titled on "EAVN Synthesis of Stellar Maser Animations: ESTEMA Phase II" was also performed from 2018. The ESTEMA II project aims to publish composite animations of circumstellar H2O and SiO masers, which taken from up to 6 long-period variable stars with a variety of the pulsation periods (333-1000 days). The animations will exhibit the three-dimensional kinematics of the maser gas clumps with complexity caused by stellar pulsation-driven shock waves and anisotropy of clump ejections from the stellar surface. Adding three EAVN telescopes (Tianma 65m, Nanshan 26m and NRO 45m telescopes) with KaVA always secures the high quality of the maser image frames through the monitoring program.