• Journal of Ocean Engineering and Technology
• /
• v.23 no.1
• /
• pp.1-6
• /
• 2009

The paper describes results of a sensitivity study on an optimum mooring cost as a function of safety factor and allowable maximum offset of the offshore floating structure by finding the anchor leg component size and the declination angle. A harmony search (HS) based mooring optimization program was developed to conduct the study. This mooring optimization model was integrated with a frequency-domain global motion analysis program to assess both cost and design constraints of the mooring system. To find a trend of anchor leg system cost for the proposed sensitivity study, optimum costs after a certain number of improvisation were found and compared. For a case study a turret-moored FPSO with 3 ${\times}$ 3 anchor leg system was considered. To better guide search for the optimum cost, three different penalty functions were applied. The results show that the presented HS-based cost-optimum offshore mooring design tool can be used to find optimum mooring design values such as declination angle and horizontal end point separation as well as a cost-optimum mooring system in case either the allowable maximum offset or factor of safety varies.

• Journal of Power Electronics
• /
• v.9 no.4
• /
• pp.643-653
• /
• 2009

Voltage-controlled voltage source inverter (VCVSI) based distributed generation systems (DGS) using renewable energy sources (RES) is becoming increasingly popular as grid support systems in both remote isolated grids as well as end of rural distribution lines. In VCVSI based DGS for load voltage stabilization, the power angle between the VCVSI output voltage and the grid is an important design parameter because it affects not only the power flow and the power factor of the grid but also the capacity of the grid, the sizing of the decoupling inductor and the VCVSI. In this paper, the steady state modeling and analysis in terms of power flow and power demand of the each component in the system at the different values of maximum power angle is presented. System design considerations are examined for various load and grid conditions. Experimental results conducted on a I KVA VCVSI based DGS prove the analysis and simulation results.

• Journal of the Korea Convergence Society
• /
• v.10 no.11
• /
• pp.159-164
• /
• 2019

Recent developments in ICT technology have increased interest in the care and health of pets such as dogs and cats. In this paper, cluster analysis was performed based on the component data of pet food to be used in various fields of the pet industry. For cluster analysis, the similarity was analyzed by analyzing the correlation between components of 300 dogs and cats in the market. In this paper, clustering techniques such as Hierarchical, K-Means, Partitioning around medoids (PAM), Density-based, Mean-Shift are clustered and analyzed. We also propose a personalized recommendation system for pets. The results of this paper can be used for personalized services such as feed recommendation system for pets.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.1
• /
• pp.58-68
• /
• 1997

In order to provide economic high-quality products to customers in a timely manner, companies have tried much effort to decrease the time period of engineering design and information management. As a part of this effort, we have developed the Drawing Information Management System(DIMS) based ofn GT(Group Technology) that could decrease design processing time by speedy and rational management of design processes. The characteristics of DIMS are as follows: First, the concept of Concurrent Engineering was applied to DIMS. Through LAN, reviewers are able to attach comments to dlectronic documents by anno- tation functions called Mark-up. The reviewer annotations are collected and combind with the original document to revise the documents. Second, we have developed a Classification and Coding(C&C) system suitable for electronic component parts bassed on GT(Group Technology). The C&C system makes both parts and drawing with similar characteriscs into families and helps users search existing documents or create new drawings promptly. Finally, DIMS provides the Engineering BOM(Bill of Material) using the concept of Family BOM based on model options.

• Proceedings of the KSPS conference
• /
• 2007.05a
• /
• pp.207-210
• /
• 2007

As the Internet is prevalent in our life, harmful contents have been increasing on the Internet, which has become a very serious problem. Among them, pornographic video is harmful as poison to our children. To prevent such an event, there are many filtering systems which are based on the keyword based methods or image based methods. The main purpose of this paper is to devise a system that classifies the pornographic videos based on the audio information. We use Mel-Cepstrum Modulation Energy (MCME) which is modulation energy calculated on the time trajectory of the Mel-Frequency cepstral coefficients (MFCC) and MFCC as the feature vector and Gaussian Mixture Model (GMM) as the classifier. With the experiments, the proposed system classified the 97.5% of pornographic data and 99.5% of non-pornographic data. We expect the proposed method can be used as a component of the more accurate classification system which uses video information and audio information simultaneously.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.120-121
• /
• 2006

In this paper, We have designed a face recognition system based on the embedded Linux. This paper has an aim in embedded system to recognize the face more exactly. At first, the contrast of the face image is adjusted with lightening compensation method, the skin and lip color is founded based on YCbCr values from the compensated image. To take advantage of the method based on feature and appearance, these methods are applied to the eyes which has the most highly recognition rate of all the part of the human face. For eyes detecting, which is the most important component of the face recognition, we calculate the horizontal gradient of the face image and the maximum value. This part of the face is resized for fitting the eye image. The image, which is resized for fit to the eye image stored to be compared, is extracted to be the feature vectors using the continuous wavelet transform and these vectors are decided to be whether the same person or not with PNN, to miminize the error rate, the accuracy is analyzed due to the rotation or movement of the face. Also last part of this paper we represent many cases to prove the algorithm contains the feature vector extraction and accuracy of the comparison method.

• Nuclear Engineering and Technology
• /
• v.53 no.7
• /
• pp.2396-2406
• /
• 2021

The Pacific Earthquake Engineering Research (PEER) Center has been developing a performance-based earthquake engineering (PBEE) methodology, which is based on explicit determination of performance, e.g., monetary losses, in a probabilistic manner where uncertainties in earthquake ground motion, structural response, damage estimation, and losses are explicitly considered. To carry out the PEER PBEE procedure for a component of the nuclear power plant (NPP) such as the cable tray system, hazard curve and spectra were defined for two hazard levels of the ground motions, namely, operation basis earthquake, and safe shutdown earthquake. Accordingly, two sets of spectral compatible ground motions were selected for dynamic analysis of the cable tray system. In general, the PBEE analysis of the cable tray in NPP was introduced where the resulting floor motions from the time history analysis (THA) of the NPP structure should be used as the input motion to the cable tray. However, for simplicity, a finite element model of the cable tray was developed for THA under the effect of the selected ground motions. Based on the structural analysis results, fragility curves were generated in terms of specific engineering demand parameters. Loss analysis was performed considering monetary losses corresponding to the predefined damage states. Then, overall losses were evaluated for different damage groups using the PEER PBEE methodology.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.2
• /
• pp.193-199
• /
• 2008

In this paper, it is proposed the implementation of face authentication system based on real-time image processing. We described the process implementing the two steps for real-time face authentication system. At first face detection steps, we describe the face detection by using feature of wavelet transform, LoG operator and hausdorff distance matching. In the second step we describe the new dual-line principal component analysis(PCA) for real-time face recognition. It is combines horizontal line to vertical line so as to accept local changes of PCA. The proposed system is affected a little by the video size and resolution. And then simulation results confirm the effectiveness of out system and demonstrate its superiority to other conventional algorithm. Finally, the possibility of performance evaluation and real-time processing was confirmed through the implementation of face authentication system.

• Journal of The Korean Association For Science Education
• /
• v.29 no.8
• /
• pp.990-1010
• /
• 2009

To derive brain-based evolutionary educational principles, this study examined the studies on the structural and functional characteristics of human brain, the biological evolution occurring between- and within-organism, and the evolutionary attributes embedded in science itself and individual scientist's scientific activities. On the basis of the core characteristics of human brain and the framework of universal Darwinism or universal selectionism consisted of generation-test-retention (g-t-r) processes, a Model of Brain-based Evolutionary Scientific Teaching for Learning (BEST-L) was developed. The model consists of three components, three steps, and assessment part. The three components are the affective (A), behavioral (B), and cognitive (C) components. Each component consists of three steps of Diversifying $\rightarrow$ Emulating (Executing, Estimating, Evaluating) $\rightarrow$ Furthering (ABC-DEF). The model is 'brain-based' in the aspect of consecutive incorporation of the affective component which is based on limbic system of human brain associated with emotions, the behavioral component which is associated with the occipital lobes performing visual processing, temporal lobes performing functions of language generation and understanding, and parietal lobes, which receive and process sensory information and execute motor activities of the body, and the cognitive component which is based on the prefrontal lobes involved in thinking, planning, judging, and problem solving. On the other hand, the model is 'evolutionary' in the aspect of proceeding according to the processes of the diversifying step to generate variants in each component, the emulating step to test and select useful or valuable things among the variants, and the furthering step to extend or apply the selected things. For three components of ABC, to reflect the importance of emotional factors as a starting point in scientific activity as well as the dominant role of limbic system relative to cortex of brain, the model emphasizes the DARWIN (Driving Affective Realm for Whole Intellectual Network) approach.

• Journal of Internet Computing and Services
• /
• v.4 no.4
• /
• pp.9-14
• /
• 2003

A GUI (graphical user interface) has been a dominant platform for HCI (human computer interaction). A GUI - based interaction has made computers simpler and easier to use. The GUI - based interaction, however, does not easily support the range of interaction necessary to meet users' needs that are natural. intuitive, and adaptive. In this paper, the modified BMA (block matching algorithm) is proposed to track a hand in a sequence of an image and to recognize it in each video frame in order to replace a mouse with a pointing device for a virtual reality. The HCI system with 30 frames per second is realized in this paper. The modified BMA is proposed to estimate a position of the hand and segmentation with an orientation of motion and a color distribution of the hand region for real - time processing. The experimental result shows that the modified BMA with the YCbCr (luminance Y, component blue, component red) color coordinate guarantees the real - time processing and the recognition rate. The hand tracking by the modified BMA can be applied to a virtual reclity or a game or an HCI system for the disable.