• Journal of Digital Contents Society
• /
• v.3 no.2
• /
• pp.245-254
• /
• 2002

Currently, communication field for automation system can be divided by simple serial communication for communication between each internal devices and network base remote control system that is based on TCP/IP. In spite of great development of network, communication part for internal control is using simple RS232 base until present. Also, development techniques of system developed by object oriented program in modular programming techniques of each function unit. Currently, it developed by component base development technique that is parts unit of software. This is presented by the new alternative of software development techniques as techniques to composition independent operation unit including business logic and is connected to development of new system. Therefore, this research implemented internal communication Emulate in RS232C based on GUI that apply development techniques of component base. that is, I maked component to commnication control part between receiving and sending and, as composite it, Control part did to handling between send and receive data.

• Journal of Internet Computing and Services
• /
• v.11 no.2
• /
• pp.31-40
• /
• 2010

In this paper, we propose a service component based on active model for supporting a variety of u-healthcare application services. It implemented that component as a classification of function for developing healthcare application services. Especially we focus on the adaptive information service in integrated environment using a distributed object technologies of the various healthcare home service based on distributed object group framework. And we shows the service component applying to Healthcare application services such as healthcare home monitoring, mobile monitoring and web based monitoring. Also, we show the performance evaluation results such as response time, system load and network load.

• The KIPS Transactions:PartD
• /
• v.9D no.6
• /
• pp.1043-1054
• /
• 2002

This paper intends to suggest a XML-based secure E-Procurement system using Unified Modeling Language(UML), as an application system for domestic automobile industry. Applying UML methodology, which is Component-based Development (CBD), we analyzed the workflow on procurement operation of automobile industry and implemented a prototype of efficient E-Procurement system for automobile industry, by developing XML/EDI and XML signature. Also, on this paper, object-oriented CBD is employed to minimize the risk of life cycle and reuse software as mentioned to limitation of information engineering methodology. It enables the interoperability with ERP (Enterprise Resource Planning) as corporate legacy system. This system proposes a solution to apply analysis and design of workflow, component development, interoperability with corporate information system, and XML signature for integrity and authentication of electronic documents in other system so far.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.533-539
• /
• 2001

In this research, design Sensitivity Analysis is presented for commercial vehicle such as large scale structural system. The proposed method is based on vibration analysis of the total structure and design sensitivity to identify the contribution factor of the component structure to the total system structure. In addition, approximated equations derived from response surface method are used for representative section properties of the thin walled beams.

• The Journal of Information Technology
• /
• v.12 no.2
• /
• pp.31-37
• /
• 2009

Component-based software development [CBSD] is a new paradigm of recent software development. CBSD was started from reuse of software and study on software component technique. In order to improve produce and quality of software development, there is study on reuse of components lively and how to develop, share, and manage components effectively. In this study, I would like to suggest a method that is able to simply test a new application system by developing systems developed individually into components, registering them, and combining them.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.452-456
• /
• 2002

The sensor based control system has some sensor fault while operating in the field. In this paper, a sensor fault detection and reconstruction system for a sun tracking controller has been researched by using polynomial regression and principle component analysis approach. The developed sun tracking system controls tow actuators with sensor based mechanism as on-line control and sun orbit information as off-line control, alternatively. To show the validity of the developed system, several experiments were illustrated.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.604-605
• /
• 2008

Modal participation factor (MPF) is a widely used in a mode-coupling squeal noise problem for finding the most sensitive component over a complex brake system in a vehicle using eigenvectors of sub-components. This methodology requires the problematic total response of system by the unstable squeal noise at a specific frequency as well as eigenvectors of each component belonging to brake system. In this paper, a unit-force response analysis is performed for intact total system to obtain eigenvectors of each component and then such data is directly used for the contribution analysis of a squeal noise problem. Since the eigenvectors of each component induced from virtual unit-excitation is most reliable owing to the intact boundary condition, it can be expected that the corresponding contribution analysis with MPF also provides a trustworthy result.

• The KIPS Transactions:PartD
• /
• v.11D no.3
• /
• pp.605-616
• /
• 2004

The purpose of CBSD(Component Based Software Development) if to develop software using a reuse component and components assembly. The reused components have to be adapter for satisfaction of requirement specification. This paper represents a component adaption method which reuse previously developed component or legacy system, using an adaptation component called by TA(Transaction Adaptor). The adaptation using TA transmits XML data that is translated into stream type, from a client to on host system. And we introduce RS(Rule Server) which gets some Information from XML data for application program development. Through the Interaction of TA and RS, we can improve effectiveness of component development and maintenance and we can reuse legacy system.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.924-925
• /
• 2008

There are many types of grid-connected inverter controllers, PI controller based is the most popular methods. But, a common PI control is produced zero-steady state error and phase delay in sinusoidal reference. Synchronous reference frame or DQ transform based controller is capable for reducing both of zero-steady state error and phase delay is. But DQ transform based controller has cross-coupling component which difficult to analyze the system in single phase model. In this paper, to obtained single phase model of the system, DQ transform based controller is analyzed in two techniques. The first is by neglecting cross-coupling. The second is eliminated cross-coupling component by decoupling method. By these two techniques, single phase model is obtained. Then, the single phase model is analyzed to evaluate its performance in stability and frequency response, through Root Locus and Bode diagram, respectively. MATLAB and PSIM simulation is used to verify the analysis. Simulation result is shown; cross-coupling component has no significant influent to the controller.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.6 s.38
• /
• pp.299-308
• /
• 2005

Recently, the standardization and computerization of franchise management have been necessitated from the specialization of industrial areas and the diversification of customer requirements. The existing ERP(Enterprise Resource Planning) systems are commercially used, but usually are restrictive solutions about manufactured goods and inventory management. etc. In this Paper, we propose an effective franchise management system Franchiser X1(FX1), which is a total component-based franchise management system for effectively supporting franchise management works, including the recruit of franchisees, the management of franchisees, consulting, education and A/S, bill collecting, and so on.