• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2005.04a
• /
• pp.55-62
• /
• 2005

In this paper, a CAB/CAE integrated optimal design system is developed, in which design and analysis process is automated using CAD/CAE softwares, for a complicated model for which parametric modeling provided by CAD software is not possible. CAD modeling process is automated by using UG/OPEN API function and UG/Knowledge Fusion provided by Unigraphics. The generated model is transferred to the analysis code ANSYS in parasolid format. Visual DOC software is used for optimization. The system is developed for PLS(Plasma Lighting System), which is a next generation illumination system that is used to illuminate stadium or outdoor advertizing panel. The PLS system consists of more then 20 components, which requires a lot of human efforts in modeling and analysis. The analysis for PLS includes static load, wind load and impact load analysis. As a result of analysis, it is found that the most critical component is a tilt assembly, which links lower & upper body assembly. For more reliable analysis, experiment is conducted using MTS and compared with the Finite element analysis result. The objective in the optimization is to minimize the material volume under allowable stresses. The design variables are three parameters in the tilt assembly that are chosen to be the most sensitive in stress values of twelve parameters. Gradient based method and RSM(Response Surface Method) are used for the algorithm and the results are compared. As a result of optimization, the maximum stress is reduced by 57%.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.125-128
• /
• 2000

A recycling reactor system operated under sequential anoxic and oxic conditions for the swine wastewater has been developed, in which piggery slurry is fermentatively and aerobically treated and then part of the effluent recycled to the pigsty. This system significantly removes offensive smells (at both pigsty and treatment plant), BOD and other loads, and appears to be costeffective for the small-scale farms. The most dominant heterotrophs were Alcaligenes faecalis, Brevundimonas diminuta and Streptococcus sp. in order while lactic acid bacteria were dominantly observed in the anoxic tank. We propose a novel monitoring system for a recycling piggery slurry treatment system through neural networks. Here we tried to model treatment process for each tank(influent, fermentation, aeration, first sedimentation and fourth sedimentation tanks) in the system based on population densities of heterotrophic and lactic acid bacteria. Principle component analysis(PCA) was first applied to identify a relation between input(microbial densities and parameters for the treatment such as population densities of heterotrophic and lactic acid bacteria, suspended solids (SS), COD, $NH_3-N$, ortho-P, and total-P) and output, and then multilayer neural networks were employed to model the treatment process for each tank. PCA filtration of input data as microbial densities was found to facilitate the modeling procedure for the system monitoring even with a relatively lower number of input. Neural networks independently trained for each treatment tank and their subsequent combinatorial data analysis allowed a successful prediction of the treatment system for at least two days.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.9
• /
• pp.2334-2344
• /
• 1998

Appliciltion systems focusing class units, as component abstraction based on source code, has insufficient benefit of independency and reuse of elements. Only few effects are acquired, because it is only inclined implementation. We need design pattern to represent not only the problem abstraction but also information and relationship between system elements for generic solutions of specific domain Also, it is essential to software reverse engineering to catch the correct system through examming the cxisting system and utilizing the acquired knowledges as reusable resource. Namely, software reverse engineering for extracting the design pattern is very important because it improves the understand ability for system analysis and design through extracting the design structure of object-oriented system, and provides rich and high leIel reusabilitv through grasping the standard idioms and relationships between components. In this paper, we defined the extraction algorithm for design patterns with standardized, packaged and quantitative measlIIul thruugh applying reyerse engineering into existing ubject Olicnted system. And we designed the reengineering toul including reverse engineering for autumatic extractiun of design patterns ami reuse fur retrieval. editing and rebuilding oi design patterns. Also we applied the algorithms into Java applications.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.2
• /
• pp.141-150
• /
• 2001

Within a context of rapid technological change and shifting market conditions, the education environment requires new paradigm of education delivery. In accordance of such a technological progress, distance education system, which makes the learning take place at anytime anywhere, overcoming barriers of time, or distance, is emerging as a mainstream of education delivery replacing the convectional one way delivery system from instructor to learners. This paper aims to introduce the development principle and algorithm about Instructional System Desgin(ISD) module, a part of a total solution for distance education services. It was developed on Linux, a free Unix-type operating system. Linux supports so various network protocols, sharing the network resources in a smooth way, that it is able to integrate with other operating system very easily, especially with Windows NT or Windows 2000 servers. In terms of quality, it never falls behind the windows products which are commercially available only. It is a right operating system for the such a school environment that is usually limited in budgets. The development environment of the distance education solution to which ISD module belongs is composing of Apache server for web server, lava bean based on components for ISD module, PHP, server-side scripting language, for HTML documents and MySQL for DBMS.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.3
• /
• pp.1-12
• /
• 2008

This study was to develop the analyzing system for watershed characteristics data. The developed system has laid the foundation for preparing the input data in various hydrological models. The algorithms and items included in the system were derived from benchmarking of the GIS WEASEL, which used to prepare the input data of PRMS (Precipitation-Runoff Modeling System). The system was designed to develop and maintain the organized system using both object-oriented UML (Unified Modeling Language) and GIS component-based ArcObjects.

• Publications of The Korean Astronomical Society
• /
• v.19 no.1
• /
• pp.83-92
• /
• 2004

In this paper, we introduce the development of the large storage system in order to record the observed space radio signal in the Korean VLBI Network(KVN) with high-speed. The KVN is the Very Long Baseline Interferometery(VLBI) to observe the birth of star, the structure of space by constructing radio telescope with diameter 21m at the Seoul, Ulsan, Jeju from 2001 to 2007 years. To do this, Korea Astronomy Observatory joined the international consortium for developing the high-speed large storage system(Mark 5), which is developed by MIT Haystack observatory. The Mark 5 system based on hard disk has to record up to 1 Gbps the observed space radio signal. The main features of Mark 5 system are as follows; First it is able to directly record the input data to the hard disk without PC1(Peripheral Component Interconnect) internal bus, and the second, it has two hard disk banks, which are able to hot-swap ATA/IDE type very cheap up to 1 Gbps recording and playback. The third is that it follows the international VLBI standard interface hardware(VSI-H). Therefore it can be connect directly the VSI-H type system at the input/output. Finally it also supports e- VLBI(Electronic-VLBI) through the standard Gigabits Ethernet connection.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.6
• /
• pp.498-505
• /
• 2010

In-Wheel System is a high-efficiency system to supply a new concept of platform which raises the efficiency of motor drive system and applies it to an environment-friendly automobile by installing a highly efficient electric motor directly to wheels and removing factors of power train. The proliferation of these systems is directly related to the safety of our lives, so check the reliability of the part in the development phase and should be certified. Reliability is the ability of a system or component to perform its required functions under stated conditions for a specified period of time. This paper presents to the verification methods for durability, one of reliability assessments of the Motor, the study calculated acceleration and deceleration torque and the effective torque from driving conditions of In-Wheel Motor, and based on this, it reduced the test time and suggested the verification methods of In-Wheel Motor reliability through the accelerated life test.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.33 no.3
• /
• pp.163-168
• /
• 2019

In order to enhance the 8 principle pattern diagnosis rate comparing with diagnostic method by self-report questionnaire on cold/heat pattern in the clinical practice, a new diagnostic method using form-color-pulse-symptom (FCPS) system is proposed. FCPS system is composed of outputs of cold/heat pattern through the calculation process of contribution degree to the cold, heat pattern and qi, blood, yin, yang deficiency patterns, based on analysis of 16 mechanisms of disease calculated by diagnostic system of oriental medicine (DSOM) first. And second component is an output of differentiated 8 principle patterns in detail through binding and calculating process with digital informations of pulse, color, form, constitution obtained by computerized measurement system. Putting together above two processes consecutively, cold-heat complex or true/false cold/heat patterns and personalized characters of cold/heat patterns of each patient can be subdivided through a computation method of determining each pattern. In conclusion, 8 principle pattern identification can be performed more accurately using FCPS system than existent self report questionnaire method. These hypothetic proposal is needed to be proven by clinical trial for the future and then the accurate numbers used in each calculational function should be revised properly.

• International Journal of Computer Science & Network Security
• /
• v.21 no.6
• /
• pp.11-16
• /
• 2021

At the present time, the number of accidents has enlarged speedily and in country like India per day there are about 204 accidents occurred. Accidents of two-wheeler compose a foremost segment of every accident and it can be true for the reason that two-wheelers like bikes not able to produce as many as security measurements normally incorporated in cars, truks and bus etc. General main rootcost of the two-wheeler accidents happen only when people community not remember to wearing a device helmet and during the driving time feels like sleep condition, alcohol disbursement, many of the drivers doesn't know heavy vehicles like Loory and buses approaching into very closer to their two wheelers, contravention of two wheelers in traffic rules and regulations. Let's overcome the above situations; our important objective is to develop an intelligent system device that can successfully facilitate in avoidance of every kind of problems. Suppose any of the above stated situations occurs, at that moment how system device identify and represents the commanders and community, and finally the stated situation be able to taken care of straight away without any further delay. A smart intelligent helmet system is a defending head covering used by rider for making bike riding safer than earlier. This is finished by incorporating sophisticated features like detecting the usage of helmet by the rider, connected Bluetooth module in helmet. In order to maintain the temperature inside the helmet device we need to include CPU fan module inside the device. RF based helmet prevents road accidents and identify whether people community is not using a component helmet or used. Main responsibility of the system is to detect accidents by vibration sensors, accelerometers and also with the help of modules global positioning system and global system for mobile commnicaiton module. A wireless communication device used to discover the accident area site location and likewise notifying the two-wheeler drived people's relatives and short message text information passed to the positioned hospitals.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.64 no.5
• /
• pp.67-77
• /
• 2022

Recently, the trend in structural analysis and design is moving towards the development of reliable system. The reliability-based method defines various limit states related to usability and failure, thereby enabling multiple levels of design according to the importance of a structure. Meanwhile, an actual structure is composed of a set of several elements, and particularly, a frame type is composed of a system in which the members are connected each other. At this time, the actual connection between members is in a semi-rigid condition, not in complete rigid or hinged. This semi-rigid is found in several structures, especially in agricultural facilities designed with lightweight materials. In this study, a system reliability analysis technique for frame structure was established, and applied to an analysis of the semi-rigid connection. Various conditions of correlation were applied to reflect the connectivity between members, and through this, the limitations of existing structural analysis method and the behavioral characteristics of structure were analyzed. The failure probability of the frame member component and the overall structure system was significantly different in consideration of the semi-rigid connection. In addition, it was evaluated that the behavior of structure can be more accurately analyzed if the correlation according to the position of members in a system is further investigated.