• The KIPS Transactions:PartD
• /
• v.12D no.6 s.102
• /
• pp.875-880
• /
• 2005

Recently web services ale being used to provide environments of distributed computing. Web services provide reusable software component. So, one web service can be used by many users, and one user can use different web services. For reliable use of web services, in these cases, it is important to be fault-tolerance. Existing fault-tolerant methods in web services need a kind of client modification and cannot consider extensible factors like quality. This study suggests the system architecture and description language for the system which can improve some of these problems.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.3
• /
• pp.105-112
• /
• 2013

To meet the growing needs from a variety of stakeholders, the development of modern systems is getting more complex and thus, the systems failure in the actual operations can potentially become more serious. This is why several international or military standards on systems safety have been published. In spite of the importance of meeting those standards such as IEC 61508 and ISO 26262 in the systems development, the associated practical methods seem deficient since those standards do not provide them. The objective of this paper is to present a method to identify potential hazards in fulfilling the requirements of the safety standards. In particular, the approach taken here is based on applying the functional analysis that covers several levels of the system under development. Note, however, that in the most of the conventional methods for hazards identification, the analysis has been focused on the failure at or underneath the component level of the system. The hazards identification method in this paper would cover the level up to the system by utilizing the functions-oriented approach. The case study of the safety enhancement for locomotive cabs is also discussed.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.12 no.3
• /
• pp.33-54
• /
• 2016

In the modern society based on information and communication, which is exposed to the risks of a lot of information security breaches, corporate information assets may be an economical scale in a country. Most of damages derived from corporate technological information leak often occur in small and medium corporations. Although many information security managers in corporations have focused on certification systems such as information security management system, small and medium corporations are poorly aware of the information security, and their environments surrounding it should be also improved. In addition, it is difficult to expect spontaneous participations in it, since the sustainable information security management systems are often not forced to be certified. Thus, the purpose of this study is to examine plans to improve small and medium corporations' technological protections by using some component of the information security management system. On the basis of this examination, it also attempts to discuss some methods for effective and efficient information security in the small and medium corporations' technological protections.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.686-689
• /
• 2005

A numerical simulation method is developed to analyze the dynamic response of a cantilever switch, which is driven by electrostatic force and a basic component of electro-mechanical coupled system. First, point-charges model on conductor is proposed as a lumped parameter of electrical part. Then, this model is easily incorporated into a multi-body dynamics analysis algorithm, the generalized recursive dynamics formula previously developed by our research group. The resulting motion of a coupled overall system is formulated as a differential algebraic equation form including electrical and mechanical variables together. The equation is simultaneously solved in every time step. To implement this approach into the useful dynamics analysis tool, we used multibody dynamics software (RecurDyn) based on the generalized recursive formula using relative coordinate. The developed numerical simulation tool is evaluated by applying to many different driving condition and switch configuration. The final analysis model will be added to RecurDyn as a basic module for dynamics analysis of electro-mechanical coupled system.

• Journal of Korea Game Society
• /
• v.5 no.1
• /
• pp.33-40
• /
• 2005

Game Designs & Developers that system designs improve, the product and the change of tasks to all developers are essential in achieving On-Line Game project. Existent Or-line Game project management designs supper the definition and the change of project activities, and configuration management designs support version check, workspace management, build management, etc. In this paper. the proposed Design defines Game component based development process model, and achieves recording of process progression, processing the request of change, reporting the progression of each task, product registering and change, version recording, artifact or form search, etc. using UML. Furthermore, study on the stake holders get the systematic management and standardization by sharing information that are necessary in Game design & development and configuration management in distributed environment using the system integrated management design.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.7 no.6
• /
• pp.34-41
• /
• 1993

This paper describes an effort to develop a microcomputer-based parameter identification system for three phase and two phase brushless DC motor. Back EMF equation is derived from back EMF waveform of three phase and two phase brushless DC motor. In this paper, a new identification algorithm for the brushless DC motor parameters by Pasek's technique is de veloped. It is found that Pasek's equation is valid for the brushless DC motor, too. The results obtained clearly shows that it is possible to implement the identification system for the determination of the brushless DC motor parameters. To minimize errors due to the ripple component in the measured armature current, dlgital averaging filter is employed. The whole identification process of signal generation, measuring, parameter determination is fully automated. The use of the pmpased method in the parameter identification system shows that the averaged current curve is in excellent agreement with the estimated current curve. Therefore, this close agreement conf i i the validity of this technique.

• Journal of Advanced Navigation Technology
• /
• v.13 no.2
• /
• pp.172-177
• /
• 2009

Mugunghwa Satellite N0.1 is fired after operation was 13 years. The establishment of communication satellites, as well as Internet service backbone network the country, including satellite broadcasting services to provide multimedia services to general users and contribute to have a big role. High-speed Internet Access Network was expanded and satellite Internet subscribers Access Network rapidly decreasing, but it also a difficult situation, satellite communications network is still important as a component is located. Launched the first communication satellite to be launched and operated several commercial communications satellite, but satellite communications services and the pace of the system is in place. In this paper VSAT, satellite communications service to provide a service based on the status and problems of the status of operating system and will present alternative policies to solve.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.6
• /
• pp.1519-1530
• /
• 1997

Object-oriented software, reusability enables to specialize the software techniques by leading the user friendly thought and meets the user's need only concentrating on convenience of development environment. Reuse effect can be maximized through retrieval system. In this paper, we development the MT-Views(Multiple-Template Views) to realize the reuse effect as integrated reuse system including retrieval, understanding and rebuilding tools based on class library. We used the hybrid retrieval model for easy and efficient retrieval of similar software components. With using these tools, users can retrieve the reusable components and reuse the components for constructing therir own applications. Also, we can acquire many informations about retrieved components, so can rebuild components conforming our original intend.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.115-116
• /
• 2006

Since the discovery of the high-temperature superconductors, many researches have been performed for the practical applications of superconductivity technologies in various fields. As results, significant progress has been achieved. Especially, Superconducting Fault Current Limiter (SFCL) offers an attractive means to limit fault current in power systems. The SFCLS, in contrast to current limiting reactors or high impedance transformers, are capable of limiting short circuit currents without adding considerable voltage drop and energy loss to power systems during normal operation. Under fault conditions, a resistance is automatically inserted into the power grid to limit the peak short-circuit current by transition from the superconducting state to the normal state, the quench. The advantages, like fail safe operation and quick recovery, make SFCL very attractive, especially for rapidly growing power systems with higher short-circuit capacities. In order to verify the effectiveness of the SFCL, in this paper, the analysis of fault current and voltage stability assessment in a sample distribution system and a transmission system are performed by the PSCAD/EMTDC based simulation method. Through the simulation, the advantage of SFCL application is shown, and the effective parameters of the SFCL are also recommended for both distribution and transmission systems. A resistive type component of SFCL is adopted in the analysis. The simulation results demonstrate not only the effectiveness of the proposed simulation scheme but also SFCL parameter assessment technique.

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.4
• /
• pp.195-204
• /
• 2014

This paper presents the depth evaluation for object detection by automated assembling robots. Pattern distortion analysis from a structured light system identifies an object with the greatest depth from its background. An automated assembling robot should prior select and pick an object with the greatest depth to reduce the physical harm during the picking action of the robot arm. Object detection is then combined with a depth evaluation to provide contour, showing the edges of an object with the greatest depth. The contour provides shape information to an automated assembling robot, which equips the laser based proxy sensor, for picking up and placing an object in the intended place. The depth evaluation process using structured light for an automated electronics assembling robot is accelerated for an image frame to be used for computation using the simplest experimental set, which consists of a single camera and projector. The experiments for the depth evaluation process required 31 ms to 32 ms, which were optimized for the robot vision system that equips a 30-frames-per-second camera.