• Nuclear Medicine and Molecular Imaging
• /
• v.42 no.2
• /
• pp.88-97
• /
• 2008

In this review paper, basic configurations of gamma detectors in SPECT and PET systems were reviewed together with key performance parameters of the imaging system, such as the detection efficiency, the spatial resolution, the contrast resolution, and the data acquisition time for quick understanding of the system-component relationship and future design of advanced systems. Also key elements of SPECT and PET detectors, such as collimators, gamma detectors were discussed in conjunction with their current and future trend. Especially development trend of new scintillation crystals, innovative silicon-based photo-sensors and futuristic room-temperature semiconductor detectors were reviewed for researchers who are interested in the development of future nuclear medical imaging instruments.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.675-679
• /
• 2007

The control method of programmable dynamometer for overall test of machine is to load reference torque which is computed from torque transducer into motor under test. But the torque information detected from torque transducer have a lot of noise when the load torque of moter is a small quantity or changing. Thus, torque transducer must have a low pass filter to detect a definite torque information. But The torque delay generated by filter with torque transducer occur a torque trouble for moter torque of programmable dynamometer. Therefore, this kind of system could not perform dynamic and nonlinear load. In this paper, the control method using the load torque observer without a measure for torque transducer is proposed. The proposed system improved the problem of the torque measuring delay with torque transducer, and the load torque is estimated by the minimal order state observer based on the torque component of the vector control induction moter. Therefore, the torque controller is not affected by a load torque disturbance.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1601-1608
• /
• 2000

This paper is concerned with the forced flexural vibration analysis of hard disk drive (HDD) spindle systems with multiple thin disks, supported by two ball bearings based on the finite element model. This is the extension of the previous work which analytically modeled every system component taking into account its structural flexibility and also the centrifugal stiffening effect especially for the disks. Among the end results, the forced time response is expectedly useful for the vibration control of the spindle itself or the position servo control of the magnetic head. On the other hand, the steady state responses such as the frequency response function and the unbalance response are useful for system identification. Futhermore, through a coordinate transformation the equations of motion is also derived with respect to the inertial frame for convenient analyses of certain classes.

• The Journal of the Korea Contents Association
• /
• v.6 no.2
• /
• pp.93-98
• /
• 2006

The paper describes a method o( user feedback in order to enhance the retrieval system effectiveness. The existing fuzzification function adapting fuzzy technique has difficulty that 4 type graph is made each time user select components. In this paper, to overcome this weak point of feedback, we proposed the interaction function using gaussian function that gives different learning rate according to choice of components with same function. We suggest the most efficient dynamic interaction function based on comparison of retrieval performance according to parameter of function. And then, we will construct the efficient retrieval system.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.22 no.1
• /
• pp.141-157
• /
• 1997

The structure and dimensionality of the User Information Satisfaction (UIS) construct is an important theoretical issue that received considerable attentions. The acceptance of UIS as a standardized instrument requires confirmation that it explains and measures the user information satisfaction construct and its component. Based on a simple of 670 respondents who participated in dealing with the Public Management Information System (PMIS), this research used a confirmatory factor analysis to test the alternavtive models of underlying factor structure and assessed the reliability and validity of these factors and items in the PMIS. The result provided a support for a revised UIS model with four first-order factors and one PMIS The result provided a support for a revised UIS model with four first-order factors and one second-order (higher-order) factor in PMIS. To cross-validata these results, the author reexamined two prior data sets. The results showed that the revised model provides better model-data fit in all three data sets.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.9
• /
• pp.1140-1143
• /
• 2001

The mortality of patients with brain abscess has decreased significaltly. This has been attributed to improved diagnostic imaging, the evolution of neurosurgical techniques and understanding of intracranial pressure pathophysiology, greater critical care understanding, and newer antibiotics. However, the mortality associated with intraventricular rupture of brain abscess remained consistently high at or above 80% once identified. A case of intraventicular rupture of thalamic abscess with good quality of survival is presented based on aggressive 4-component therapeutic plan used. The four components are 1) extraventricular drainage for 6 weeks, 2) lavage of the ventricular system using closed irrigation system, 3) intravenous antibiotics, 4) intraventricular gentamicin and vancomycin, twice and once daily, respectively.

• Annual Conference of KIPS
• /
• 2003.11b
• /
• pp.1325-1328
• /
• 2003

구성원들이 직접 정보를 제공하고 책임지는 정보 실명제를 기반으로 모든 구성원이 손쉽게 정보를 제공할 수 있도록 CMS(Contents Management System) 형태의 UIP(University Information Portal) 시스템을 구축하였다. 또한 UML(Unified Modeling Language)과 CBD(Component Based Development) 개발 기법을 적용하여 UIP 시스템에서 사용되었던 컴포넌트들을 다른 웹 기반 시스템에서도 손쉽게 사용할 수 있도록 하여 개발 코드를 재사용 할 수 있도록 하였다.

• Proceedings of the KIEE Conference
• /
• 1999.11b
• /
• pp.153-156
• /
• 1999

In this paper, we design a GA-fuzzy precompensated PID controller for the load frequency control of two-area interconnected power system. Here, a fuzzy precompensated PID controller is designed as a fuzzy logic-based precompensation approach for PID controller. This scheme is easily implemented simply by adding a fuzzy precompensator to an existing PID controller. And we optimize the fuzzy precompensator with a genetic algorithm for complements the demerit such as the difficulty of the component selection of fuzzy controller, namely, scaling factor membership function and control rules.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.564-567
• /
• 2007

GPS(Global Positioning System) data has a high accuracy at outdoor positioning generally, but its accuracy decreases in the urban areas with dense buildings. Moreover insufficient number of satelllites prevent us GPS positioning at inside of buildings. To complement these shortcomings of GPS, RFID(Radio Frequency IDentification) has been studied on indoor positioning parts. In Ubiquitous environment, LBS(Location Based Service) which can be used anytime and anywhere is an essential component. We use kalman filter to estimate the real location in GPS and RFID handover area. This study's purpose is to make a continuous positioning system using interlocking RFID and GPS.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.4 no.2
• /
• pp.1-6
• /
• 2008

Very High Temperature Gas Cooled Reactor (VHTR) has been selected as a high energy heat source for nuclear hydrogen generation. The VHTR can produce hydrogen from heat and water by using a thermo-chemical process or from heat, water, and natural gas by steam reformer technology. A co-axial double-tube primary hot gas duct (HGD) is a key component connecting the reactor pressure vessel and the intermediate heat exchanger (IHX) for the VHTR. In this study, a preliminary design analysis for the primary HGD of the nuclear hydrogen system was carried out. These preliminary design activities include a determination of the size, a strength evaluation and an appropriate material selection. The determination of the size was undertaken based on various engineering concepts, such as a constant flow velocity model, a constant flow rate model, a constant hydraulic head model, and finally a heat balanced model.