• Journal of Yeungnam Medical Science
• /
• v.10 no.1
• /
• pp.144-156
• /
• 1993

This study was performed to investigate the effect of octreotide on the contractility of rat vas deferens. The smooth muscle strips isolated from the prostatic portion were myographied in isolated organ bath, Electric field stimulation (monophasic square wave, duration: 1 mSec, voltage : 50 V, frequency : 5 Hz or 30 Hz, train: 10 Sec) produced reproducible contraction. The contraction was composed of two component, first phasic component (FPC) and second tonic component (STC). These contractions were abolished by tetrodotoxin ($1{\mu}M$). Octreotide inhibited the field stimulation induced contractions both FPC and STC concentration-dependently. The FPC was decreased by a desentization of purinergic receptor by pretreatment of mATP, and the STC was decreased by pretreatment of reserpine(3 mg/kg, IP) 24 hours before experiments. Octreotide reduced the field stimulation induced contraction in the presence of mATP and of reserpinized muscle strips. The inhibitory effect of octreotide was more potent at 5 Hz than at 30 Hz. Octreotide did not affect basal ton and exogenous norepinephrine- or ATP-induced contraction. These results suggest that octreotide inhibit the contractility of the isolated rat vas deferens by inhibition of the release of neurotransmitters, both ATP and norepinephrine from adrenergic nerve terminal.

• Journal of the Korean Society of Food Culture
• /
• v.22 no.4
• /
• pp.462-467
• /
• 2007

Volatile components of six commercial $sauces(A{\sim}F)$ and $\hat{O}yuk-jang$(G, H), a Korean traditional fermented sauce, were analyzed by electronic nose based on GC with surface acoustic wave(SAW) sensor. The obtained data were used for pattern recognition and a visual pattern called a $VaporPrint^{TM}$, derived from the frequency and chromatogram of the GC-SAW sensor. Volatile components of sauces and $\hat{O}yuk-jang$ were well discriminated with the direct use of $VaporPrint^{TM}$. Commercial sauces and $\hat{O}yuk-jang$ showed different volatile patterns, respectively, due to different major material, which meju, beef extract, pickled anchovies, and Katsuobushi were used. Volatile components of Oyuk-jang were decreased drastically during the fermentation time. After boiling $\hat{O}yuk-jang$, new several peaks were found. The responses by electronic nose were used for principal component analysis. The PCA plot showed that volatile components pattern were well discriminated by first principal component score(proportion: 96.8%), and first principal component score of $\hat{O}yuk-jang$ was between soy sauce of the liquid extracted from beef and sauce of pickled anchovies.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.6 no.1
• /
• pp.9-15
• /
• 2010

This paper describes the Visual Tool for automatic ultrasonic examination that is under developing as a part of the project for development of automatic ultrasonic wave acquisition and analysis program. This tool that is supported by various image processing techniques will be adopted to detect the flaws in the component and piping welds in NPP. Visual Tool will enhance the integrity of nuclear power plant. The object of this paper is to address the Visual Tool which is developing for automatic ultrasonic inspection of welds in NPP.

• Proceedings of the KIEE Conference
• /
• 1990.11a
• /
• pp.295-300
• /
• 1990

This paper describes a new method to increase the fundamental output of PWM inverter by adding all triplen-harmonics to sinusoidal reference wave. As a result, the amplitude of the fundamental component is increased upto 21 percent compared with the conventional SPWM method, and hence the conversion efficiency of dc link is higher. Also as the commutation number of the inverter is decreased to two-thirds, the heating of the switch devices is reduced. In addition random carrier modulation is adopted to lower the acoustic noise at given frequency modulation index.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.09a
• /
• pp.338-341
• /
• 2003

Recently, the chaotic method is employed to forecast a near future of uncertain phenomena. This method makes it possible by restructuring an attractor of given time-series data in multi-dimensional space through Takens' embedding theory. However, many economical time-series data are not sufficiently chaotic. In other words, it is hard to forecast the future trend of such economical data on the basis of chaotic theory. In this paper, time-series data are divided into wave components using wavelet transform. It is shown that some divided components of time-series data show much more chaotic in the sense of correlation dimension than the original time-series data. The highly chaotic nature of the divided component enables us to precisely forecast the value or the movement of the time-series data in near future. The up and down movement of TOPICS value is shown so highly predicted by this method as 70％.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.09b
• /
• pp.118-121
• /
• 2003

Generally, the repeater in CDMA(Code Division Multiple Access) included HPA(HI-Power Amplifier) to amplifier communication signals. Also , HPA contained PD(Predistortor) to maintain the linearization of amplifier characteristics. A configuration component of PD have been used electricity nonlinear devices such that diode. But this diode takes many influences at the circumstance temperature. Consequently, it can't maintain output linearization, and drop the communication quality. The manufacturer set bias of the circuit to the manual at the first out of ware-house low But the Q-point changes according to the change of the high temperature or low temperature. Therefore, we designed a system to maintain the Q-point by FDM(Fuzzy Decision Maker) in this paper.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.5
• /
• pp.157-164
• /
• 2000

A machine tool generally has some serious stability problems in the form of tool chatter during the cutting process. Chatter vibration deteriorates the surface finish, reduce tool and machine life, accelerates machine tool system component wear, and may lead to an unacceptable noise sound in the working environment. In this study, the behavior of spectral density of AE signal and principal cutting force signal in order to monitor the chatter vibration in the cutting process has been investigated. From the results, the reliability of proposed monitoring method has been confirmed.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.3
• /
• pp.262-267
• /
• 2007

Detection of gas leak from a tube is a very important issue in the quality control of machines such as the heat exchanger of an air-conditioner, because leakage of operating gas directly reduces the performance of machines. The acoustic emission (AE) method is a common way to detect leak of gas, however its application under the environment of mechanical vibration is restricted since most AE detectors are very sensitive to external vibration noise. In order to overcome this problem, we propose a method based on the mode analysis of the Lamb wave. In this method, the dominant Lamb mode and its frequency are found first, and then a proper band-pass filter is used to retain only this frequency component. In this way, we could improve the SNR (signal-to-noise ratio) of AE signal generated by gas leak from the tube even under vibratory environment.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.385-388
• /
• 1994

This paper presents a new configure rectifier which has improved input power factor and efficiency for DC arc weldings. Two rectifiers are series connected and they are single-phase full-wave phase controlled rectifiers that use a transformer with two center-tapped secondary. The input power factor can be improved by controlling the each phase of rectifiers sequentially, and then the efficiency can be also improved because the reactive component currents will be reduced. It is confirmed that the proposed rectifiers has about 80% of input power factor and efficiency with the experimental results which are carried out at the output ranges of 100A to 300A.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1995.04a
• /
• pp.65-92
• /
• 1995

The final aim of our research project is a study on assessment of automatic steering system of ships in open seas. In order to achieve this aim we need to know the characteristics of each component of the system and also to know the characteristics of disturbance to ship dynamcis. In this paper we provide calculation method of irregular disturbance to ships in autopilot navigation in open seas and also show calculation examples about two kinds of ship ore carrier and fishing boat. The disturbance consists of irregular wave and random wind, The disturbance is calculated as equivalent yaw angular velocity. Each spectrum and time history of disturbance are reasonably evaluated. Further investigation concerning to performance index of autopilot system and energy loss related to automatic course keeping will be dealt with in another paper,