• ETRI Journal
• /
• 제18권1호
• /
• pp.15-27
• /
• 1996

The effects of $Nd_2O_3$ and $TiO_2$ addition on the microstructures and microwave dielectic properties of $BaO-Nd_2O_3-TiO_2$ system were investigated. $BaNd_2Ti_4O_{12}$ or $BaNd_2Ti_{5}O_{14}$ phases were observed for compositions based on BaO/$Nd_2O_3$ = 1 ratio. The compositions deviated from $BaO/Nd_2O_3=1$ ratio were composed of major phases of $BaNd_2Ti_4O_{12}$ or $BaNd_2Ti_5O_{14}$, and the compound of $Nd_2O_3$ and $TiO_2(Nd_2Ti_2O_7)$ or that of BaO and $TiO_2(BaTi_4O_9)$. The microstructure of ceramic with $BaO{\cdot}Nd_2O_3{\cdot}4TiO_2$ composition varied from spherical grains to needlelike grains with increasing sintering temperature. With increasing $Nd_2O_3$, the optimum sintering temperature with maximum density increased, and the dielectric constant(${\varepsilon}_r$) and quality factor(Q) decreased due to the formation of secondary phases. With increasing $TiO_2$, the optimum sintering temperature and the dielectric constant decreased with increased Q value. And the temperature coefficient of resonant frequency, ${\tau}_f$ shifted toward positive direction. The dielectric ceramics with $BaO/Nd_2O_3=1$ showed Q values of above 2000 and dielectric constants of above 80 at 3GHz.

• 한국도로학회논문집
• /
• 제14권4호
• /
• pp.51-61
• /
• 2012

PURPOSES : This study deals with the working life of polymer concrete, which is typically used as a repair or overlay material for portland cement concrete pavements. METHODS : In the scope of this study, laboratory testing was conducted on fresh MMA modified UP polymer concrete, which uses an MMA monomer for viscosity adjustment and strength improvement of UP resin. The experimental variables were temperature (-20 to $+20^{\circ}C$) and binder components (MMA, MEKPO, and DMA). RESULTS : The result showed that the optimum binder ratios for polymer concrete production were 12, 11, and 10 wt.% when the MMA contents were 20, 30, and 40 wt.%, respectively. The working life of polymer concrete depending on temperature and binder components could be expressed by a logarithmic functional formula. The coefficient of variation for each binder component was the highest for DMA content while the lowest for MEKPO content. Also, the contents of each binder component for ensuring the working life of 60 minutes were proposed. CONCLUSIONS : Ultimately, the present study derived a linear regression equation estimating 60 minutes working life based on the setting times of each binder component.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2005년도 제31회 KOSCO SYMPOSIUM 논문집
• /
• pp.120-131
• /
• 2005

The evaporation characteristics of single and multicomponent droplets hanging at the tip of a quartz fiber are studied experimentally at the different environmental conditions under normal gravity. Heptane and Hexadecane are selected as two fuels with different evaporation rates and boiling temperatures. At the first step, the evaporation of single component droplet of both fuels has been examined separately. At the next step the evaporation of several blends of these two fuels, as a binary component droplet, has been studied. The temperature and pressure range is selected between 400 and 700 $^{\circ}C$, and 0.1 and 2.5 MPa, respectively. High temperature environment has been provided by a falling electrical furnace. The initial diameter of droplet was in range of 1.1 and 1.3 mm. The evaporation process was recorded by a high speed CCD camera. The results of binary droplet evaporation show the three staged evaporation. In the the first stage the more volatile component evaporates. The droplet temperature rises after an almost non evaporating period and in the third stage a quasi linear evaporation takes place. The evaporation of the binary droplet at low pressure is accompanied with bubble formation and droplet fragmentation and leads to incomplete microexplosion. The component concentration affects the evaporation behavior of the first two stages. The bubble formation and droplet distortion does not appear at high environment pressure. Nomenclature

• Current Optics and Photonics
• /
• 제3권6호
• /
• pp.502-509
• /
• 2019

Based on the typical pixel structure and parameters of a polysilicon uncooled bolometer, the absorption rate of a polysilicon microbridge infrared detector for 10.6 ㎛ laser energy was calculated through the optical admittance method, and the thermal coupling model of a polysilicon microbridge component irradiated by far infrared laser was established based on theoretical formulas. Then a numerical simulation study was carried out by means of finite element analysis for the actual working environment. It was found that the maximum temperature and maximum stress of the microbridge component are approximately exponentially changing with the laser power of the irradiation respectively and that they increase monotonically. The highest temperature zone of the model is gradually spread by the two corners of the bridge surface that are not connected to the bridge legs, and the maximum stress acts on both sides of the junction of the microbridge legs and the substrate. The mechanism of laser-induced hard damage to polysilicon detectors is the melting damage caused by high temperature. This paper lays the foundation for the subsequent study of the interference mechanism of the laser on working state polysilicon detectors.

• 한국재료학회지
• /
• 제26권1호
• /
• pp.22-28
• /
• 2016

In this study, we fabricated high quality color conversion component with green/red phosphor and low melting glass frit. The color conversion component was prepared by placing the green and red phosphor layer on slide glass via screen printing process. The properties of color conversion component could be controlled by changing coating sequence, layer thickness and heat treatment temperature. We discovered that optical properties of color conversion component were generally determined by the lowest layer. On the other hand, the heat treatment temperature also affected to correlated color temperature (CCT) and color rending index (CRI). The color conversion component with a green (lower) - red (upper) layer which was sintered at $550^{\circ}C$ showed the best optical properties: CCT, CRI and luminance efficacy were 3340 K, 78, and 56.5 lm/w, respectively.

• 청정기술
• /
• 제23권4호
• /
• pp.421-428
• /
• 2017

본 연구는 상용활성탄을 사용하여 산업공정에서 많이 사용되는 휘발성 유기화합물 중 톨루엔, 메틸에틸케톤(MEK), 이성분계(톨루엔-MEK)를 대상으로 흡착 및 탈착특성을 고찰하였다. 최적탈착온도를 설정하기 위해 온도별 탈착특성을 고찰하였고, 활성탄의 특성을 파악하기 위해 BET분석을 하였다. 상온에서 흡착실험을 진행하였고, $120^{\circ}C$까지 승온하여 탈착실험을 진행하였다. 이 실험을 10회 반복해서 진행하였다. 이를 통해 단일성분에서는 반복횟수가 많아질수록 흡착 및 탈착능이 줄어들며 활성탄과 상대적으로 친화력이 적은 MEK의 경우 톨루엔보다 낮은 흡착 및 탈착능을 보였다. 이성분계의 흡착 및 탈착 반복시험에서 친화력이 낮은 MEK가 먼저 파과되고 결과적으로 주입 농도보다 높은 농도로 탈착되었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제3권2호
• /
• pp.69-76
• /
• 2001

Unsteady components of the second-order axial velocity and temperature within a tapered pulse tube were obtained by using a novel hybrid method of solution which combines an analytical solution with a numerical solution. The effects of operating frequency, taper angle and cold eng temperature on the unsteady components of the second-order axial velocity and temperature were shown. The unsteady component of the second-order mass flux had the amplitude of the same order as the steady component when the velocities at the ends of the pulse tube have only first-order components.

• 천문학회지
• /
• 제41권1호
• /
• pp.1-6
• /
• 2008

The X-ray spectra of late type stars can generally be well fitted by a two temperature component model of the corona. We find that the temperatures of both components are strong functions of stellar age, although the temperature of the hotter plasma in the corona shows a larger scatter and is probably affected by the activity of stars, such as flares. We confirm the power-law decay of the temperature of the hot plasma, but the temperature of the cool plasma component decays linearly with log(age).

• 한국수자원학회논문집
• /
• 제38권12호
• /
• pp.985-994
• /
• 2005

수문시계열을 분석하기 위한 방법으로 낮은 차원에서 해석이 가능한 주성분분석 방법의 문제점을 검토하고 이를 보완할 수 있는 독립성분분석의 이론과 특성을 검토하였고 수문기상자료인 Nino지역의 해수면온도에 적용하여 El $\tilde{n}ino$-Southern Oscillation(ENSO) 사상과의 상관성을 평가하였다. 혼합자료를 사용하여 독립성분분석 방법의 주성분 분리 능력을 검토한 결과 독립성분분석이 기존 주성분분석에 비해 통계적으로 우수한 결과를 나타내었다. El $\tilde{n}ino$의 감시구역인 Nino+3.4지역의 $5^{\circ}{\times}5^{\circ}$(위도와 경도)의 총 20개 Global Anomaly SST 격자자료를 대상으로 분석을 실시하여 El $\tilde{n}ino$-Southern Oscillation(ENSO)사상의 발생시기와의 상관관계를 평가하였으며 한 개의 독립성분($86\%$)만으로 SST의 전체적인 거동을 표현할 수 있었으며 주요 ENSO 발생시기와 일치하는 결과를 나타내었다. 또한 국내 주요지점의 여름 강수량을 대상으로 독립성분분석을 적용한 결과 지역적인 특성을 고려하여 비교적 합리적으로 독립성분을 추출할 수 있었으며 IC-1과 IC-2에서 1970년대 이후로 여름강수량의 증가를 확인할 수 있었다.

• 한국군사과학기술학회지
• /
• 제13권2호
• /
• pp.320-327
• /
• 2010

The IR signature data of a ship is mainly affected by location, meteorological conditions(atmosphere temperature, wind direction and velocity, humidity etc.), atmospheric transmittance, solar position and ship surface temperature etc. The IR signatures received by a remote sensor at a given temperature and wavelength region is consisted of the self-emitted component directly from the object surface, the reflected component of the solar irradiation at the object surface, and the scattered component by the atmosphere without ever reaching the object surface. Computer simulations for prediction of the IR signatures of ships are very useful to examine the effects of various sensor positions. In this paper, we have acquired the IR signature for different sensor positions by using computer program for prediction of the IR signatures. The numerical results show that the IR signature contrast as compared to the background sea considering the meteorological conditions, solar and sky irradiations.