References
- Ahn N.(2006), "Influence of metallic polymeric materials on the properties of fresh polyester and acrylic polymer concrete". Journal of Applied Polymer Science, 99, pp.2337-2343 https://doi.org/10.1002/app.22846
- Ahn N., Park D. K., Lee J., Lee M. K.(2009), "Structure test of precast polymer concrete". Journal of Applied Polymer Science, 114, pp.1370-1376 https://doi.org/10.1002/app.30731
- Brooks J. J., Megat Johari M. A., Mazloom M.(2000), "Effect of admixture on the setting of high-strength concrete". Cement & Concrete Composites, 22, pp.293-301 https://doi.org/10.1016/S0958-9465(00)00025-1
- Chandra S., Ohama Y.(1994), "Polymers in concrete". CRC.Press, Inc, 134-136, pp.189-191
- Choi J. J., Yu H. J.(2010), "Effects of filling materials on the physical properties of permiable polymer concrete", Journal of the KSCE, 30(2A), pp. 177-184
- Erdem T. K., Turanli L., Erdogan T. Y.(2003), "Setting time : an important criterion to determine the length of the delay period before steam curing of concrete". Cement and Concrete Research, 33, pp.741-745 https://doi.org/10.1016/S0008-8846(02)01058-X
- Emmanuel S., Jean P.(2002) "Influence of magnesia surface on the setting time of magnesia phosphate cement". Cement and Concrete Research, 32, pp.153-157 https://doi.org/10.1016/S0008-8846(01)00647-0
- Eren O., BROOKS J. J., Celik T.(1995), "Setting time of fly ash and slag-cement concretes as affected by curing temperature". American Society for Testing and Materials, pp.11-17
- Haddad M. U., Fowler D. W., Paul D. R.(1983), "Factors affecting the curing and strength of polymer concrete". Journal of the American Concrete Institute, 80(38), pp.396-402
- Jeong Y. D., Kim J. H., Lee S. H., Jeong J. H.(2011), "Static analysis of actual bridges for application of thin polymer concrete deck pavements", Journal of the KSCE, 31(3D) pp. 421-431
- Kim T. W., Kim D. Y., Nguyen M. T., Lee H. J.(2009), "A study on the physical characteristics of acryl concretes for thin bridge deck pavements", Journal of the KSRE,11(3), pp.1-11
- Kim D. Y., Kim T. W., Lee H. J., Kim H. B.(2010), "Characterization of acryl polymer concrete for ultra thin overlays", Journal of the KSRE, 12(3), pp.1-8
- Kobayashi T., Ohama Y.(1984), "Low-temperature curing of polymethyl methacrylate polymer concrete". Transportation Research Record 1003, Transportation Research Board, (ISSN:0361-1981), pp.15-18
- Li J.(2011), "Fresh concrete". Advanced Concrete Technology, pp.94-108
- Ohama Y.(1978), "Determination method for working life of polyester resin concrete". American Concrete Institute, Detroit, pp.31-40
- Pessiki S. P., Carino N. J.(1988), "Setting time and strength of concrete using the impact-echo method". Journal of ACI Materials, 85, pp.3893-99
- Sung C. Y., Kim T. H.(2011). "Engineering properties of permeable polymer concrete for pavement using powdered waste glass and recycled coarse aggregate", Journal of the KSAE, 53(5), pp.59-65
- Subramaniam K. V., Lee J., Charistensen B. J.(2005) "Monitoring the setting of cementitious materials using one-side ultrasonic measurement". Cement and Concrete Research, 35, pp.8508-57