• International Journal of Aeronautical and Space Sciences
• /
• v.7 no.2
• /
• pp.86-103
• /
• 2006

Using a combination of force transducer measurement to quantify net lift force, high frame rate camera to quantify and subtract inertial contributions, and Digital Particle Image Velocimetry (DPIV) to calculate aerodynamic contributions in the spanwise plane, the contribution of spanwise flow to the generation of lift force in wings undergoing a pure flapping motion in hover is shown as a function of flapping angle throughout the flapping cycle. These experiments were repeated at various flapping frequencies and for various wing planform sizes for flat plate and span wise cambered wings. Despite the previous identification of the importance of span wise fluid structures in the generation of lift force in flapping wings throughout the existing body of literature, the direct contribution of spanwise flow to lift force generated has not previously been quantified. Therefore, in the same manner as commonly applied to investigate the chordwise lift distribution across an airfoil in flapping wings, spanwise flow due to bulk flow and rotational fluid dynamic mechanisms will be investigated to validate the existence of a direct component of the lift force originating from the flapping motion in the spanwise plane instead.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2002.04a
• /
• pp.25-26
• /
• 2002

가스터빈 엔진의 성능모사는 개발단계에서의 개발위험도 감소나 개발비용 절감의 목적뿐만 아니라 운용단계에서 최적의 정비를 위한 엔진의 상태 진단을 위해서도 그 필요성이 매우 크다. 가스터빈 엔진의 성능모사를 위해서는 "각 구성품의 성능은 구성품 성능선도를 따라야 한다"는 제약조건을 만족해야 하며 이를 위해서는 구성품의 특성을 나타내는 성능선도가 매우 중요하다. 구성품 성능선도는 다양한 조건에서의 성능시험을 통해 얻는 것이 당연하나 이는 엔진 개발사에서나 가능하며 대부분 공개를 기피한다. 따라서 일반 구매자나 가스터빈 엔진의 성능을 연구하는 사람들은 일부 공개된 성능도를 축척하여 이용하고 있다.여 이용하고 있다.

• Journal of Korean Society for Atmospheric Environment
• /
• v.18 no.4
• /
• pp.317-325
• /
• 2002

An air pollution monitoring station has been operated at Tokchok Island since April 1999 to characterize the background atmosphere in the vicinity of the Yellow Sea. In this study, eight chemical species in PM$_{2.5}$ and three gaseous species were analyzed. A total of 53 samples were collected for the analysis of PM$_{2.5}$ and gaseous species from April, 1999 to April, 2001. The overall mean mass concentration of PM$_{2.5}$ was 20.8 $\mu\textrm{g}$/㎥ and the eight soluble ionic species accounted for about 46.8% of PM$_{2.5}$ mass. Approximately 80% of samples appeared to experience the chloride loss effect. Air pollutant sources of PM$_{2.5}$ measured at Tokchok Island were qualitatively identified by the principal component analysis. It was found that five principal components are secondary aerosol, soil, incineration, phase change of nitrate, and ocean.and ocean.

• Microbiology and Biotechnology Letters
• /
• v.48 no.3
• /
• pp.322-327
• /
• 2020

Abortive infection systems (Abi) are phage resistance systems that can be prophage-encoded. Here, two genes encoding an Abi system were identified on a prophage sequence contained by the chromosome of the Levilactobacillus brevis strain UCCLBBS124. This Abi system is similar to the two-component AbiL system encoded by Lactococcus lactis biovar. diacetylactis LD10-1. The UCCLBBS124 prophage-derived Abi system (designated here as AbiL₁₂₄) was shown to exhibit specific activity against phages infecting L. brevis and L. lactis strains. Expression of the AbiL₁₂₄ system was shown to cause reduction in the efficiency of plaquing and cell lysis delay for phages of both species.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.7
• /
• pp.302-307
• /
• 2002

Digital watermarking is the technique, which embeds an invisible signal including signal including owner identification and copy control information into multimedia data such as audio, video, and images for copyright protection. A new MPEG watermark embedding algorithm using complex block effect based on the Human Visual System(HVS) is introduced in this paper. In this algorithm, $8{\times}8$ dark blocks are selected, and the watermark is embedded in the DC component of the discrete cosine transform(DCT) by using quantization and modulus calculation. This algorithm uses a blind watermark retrieval technique, which detects the embedded watermark without using the original image. The experimental results show that the proposed watermark technique is robust against MPEG coding, bitrate changes, and various GOP(Group of Picture) changes.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.5 no.3
• /
• pp.111-117
• /
• 2010

The easily accessible handheld devices equipped with camera are widely available as common commodities. According to this trend, utilization of images is popular among common users for various purposes resulting in huge amount of images in local or network based storage systems. In this environment, identification of an image with a solid and effective manner is demanded in behalf of safe distribution and efficient management of images. The generated identifiers can be used as a file name in file systems or an index in image databases utilizing the uniqueness of the identifiers. In this paper, we propose a method that generates image identifiers using linear components in images. Some experiments of generation of identifiers are performed, and the results evaluate that the proposed method has feasible effectiveness.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.3
• /
• pp.472-477
• /
• 2003

A piezo-actuator is an important component for an E-beam lithography system. But it is very difficult to model its characteristics due to nonlinearities such as hysteresis and creep, to the input voltage. In this paper, one-axis micro stage with a piezo-actuator is modeled including the nonlinear properties. Hysteresis and creep are modeled as the first order differential equation and a time-dependent logarithmic function, respectively. The dynamic motion of the stage is also modeled as a mass-spring-damper system and the parameters are determined by utilizing the system identification technique. The simulation tool for a micro stage is constructed using the commercial software and its simulation results are compared with the experimental data.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1993.04a
• /
• pp.46-51
• /
• 1993

본 연구에서는 2회전자계(Two Revolving Field)이론과, 고정기준좌표계 (Stationary Reference Frame)이론을 이용하여 토오크 산출식을 유도하고 이 두 식을 비교하였다. 또한 고정자(Stator)의 전압과 전류를 측정한 결과에 고 정기준좌표계이론을 적용하여 토오크를 간접적으로 구하는 실험을 수행하여 변동토오크를 실험적으로 확인하도록 하였다. 또한 시뮬레이션(Simulation)을 통해 진동기 설계 매개변수들이 토오크의 변동성분에 미치는 영향을 파악하 고, 고정자 코일의 저항과 축전기의 영향은 실험을 통하여 확인하였으며, 더 불어 다구찌 방법을 이용하여 특정 목적 하에서 토오크의 변동성분을 줄이 는 전동기 설계 매개변수를 제시하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.789-794
• /
• 2008

The damage identification in a flexible system requires modal informations which is represented by FRF(Frequency response function) or modal parameters. In this paper, energy isoclines are introduced to access the prediction of fatigue damage on a flexible component exposed mainly to the exciting source rather than external forces. After deriving the concerned function, energy isoclines, from the investigation of the relationship between energy and damage, its practical application is explained by the simple uni-axial excitation test for the notched round bar.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.437-440
• /
• 2003

As we know, roof is composed of heterogeneous rock. When roof fractures, a large amount of energy would be released in the form of seismic wave. How to identify the abnormal signal of seismic wave is a much difficult problem, there are many methods used usually, such as Fourier Transformation, filter technique etc., but abnormal signal can't be recognized accurately. In this paper, multi-resolution wavelet technique is used to identify the first and second variation point, based on the Lipschitz $\alpha$. A living example analysis shows, multi-resolution wavelet technique can identify the abnormal signal of seismic wave effectively in different scale, and the omen of roof fall can be grasped in order to forecast the roof fall accurately. It provides a new idea for the predication of catastrophe on rock mechanics and engineering.