• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.44 no.4
• /
• pp.437-445
• /
• 2018

In this study, we analyzed two components, sulforaphane and PF-3758309 to prove that the mixed composition of them has more effective antioxidant and whitening functions compared to each component. We analyzed the cellular toxicity of each component and also the mixed composition to find the safe concentration level for cell viability. From the single component treatment, we discovered that sulforaphane was safe up to $10{\mu}M$, and PF-3758309 up to 100 nM. Combination treatment of $10{\mu}M$ sulforaphane and 1 nM PF-3758309 did not affect the cell viability. The LPS-stimulated NO generation was significantly reduced by the mixed composition of sulforaphane and PF-3758309. Melanogenesis by ${\alpha}$-melanocyte stimulating hormone (${\alpha}$-MSH) was also inhibited by the mixed composition. In order to confirm the possibility as the cosmetic material, we carried out clinical studies for the mixed composition samples. Skin safety evaluation using patch test was judged to be unstimulated, skin whitening effect was increased, and melanin deposition was suppressed by treatment of mixed composition samples. These results provide us with the opportunity for applying it into the development of new functional cosmetics.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.5
• /
• pp.1388-1400
• /
• 2000

An important technical issue in recent software development is to make needed software by the composition of components that are assemblable, and configurable, and independently extracted. The main advantage of component-based software development is reducing development time and cost. It is more cost-effective in development time to use components that are already developed than developing from scratch. There are two ways of component-based software development: one is to compose self-developed components, and the other is to by the components developed by third-parties and compose them. In the second case, existing non component programs must can be used for reuse in the component development. In this paper, we approach two methods for increase of reusability of Java program. First, we suggest the technique of extracting the elements suitable for the Beans component model from Java program, and then we show a process and a guideline of converting the extract elements into the Beans component model. Second, we suggest a technique of automatically extracting component information from the Java Beans component, expressing them in XML, its is possible to reuse the efficient component environment.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.249-252
• /
• 2007

Workflow composition and management is a crucial part of Component Based Development (CBD). Workflows can be composed reusing existing workflows to improve efficiency during the various stages of software development process. Reusability of software process activities is improved by using existing workflows. This paper proposes a Workflow Composition Engine that generates workflow which consists of existing process activities and describes design of The Workflow Composition Engine. A prototype of the Workflow Composition Engine implemented is described.

• Convergence Security Journal
• /
• v.7 no.3
• /
• pp.25-30
• /
• 2007

CC ver.3 is widening evaluation range extent about Security product. As a result, The security product evaluation research need more definite standard that serves to evaluate composition style product. The paper propose a development guide for composition style TOE. This research is suitable in evaluation basis of CC ver.3, and presents Korean-made composition style product estimation plan. This paper used European ITSEM component guide and TOE analysis to present estimation guide method of composition style product.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.341-344
• /
• 1997

A vitrification process is under development in KEPRI for the treatment of low-and medium-level radioactive waste. Although the project is for developing and building Vitrification Pilot Plant in Korea, one of KEPRI's concerns is the quality control of the vitrified glass. This paper discusses a methodology for the estimation of glass composition by on-line measurement of molten glass properties, which could be applied to the plant for real-time quality control of the glass product. By remotely measuring viscosity and density of the molten glass, the glass characteristics such as composition can be estimated and eventually controlled. For this purpose, using the database of glass composition vs. physical properties in isothermal three-component system of SiO$_2$-Na$_2$O-B$_2$O$_3$, a software TERNARY has been developed which determines the glass composition by using two known physical properties(e.g. density and viscosity).

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.9-10
• /
• 2015

Waste Concrete Powder will be generated during the manufacture of construction waste as recycled aggregate Waste concrete. The main component of the waste concrete Powder is a silica-based composition 51% SiO₂, waste concrete cement-based composition Al₂O₃ 10%, CaO 26% component are contained. The material is silica sand of PHC piles should experiment by replacing the Waste Concrete Powder. The compressive strength results are as follows. 25% when the Silica was replaced 32.5Mpa, when 50% have replaced 43.4Mpa, when 75% have replaced 45.3Mpa was measured. Compared with the non-replaced test sample it appears that the strength increases. Therefore, it is determined that the practical use of the PHC piles by replacing silica via this experiment is possible.

• Journal of Environmental Health Sciences
• /
• v.28 no.3
• /
• pp.34-38
• /
• 2002

Statistical analysis between sewage plant operating parameters and the effluent quality was performed. We extracted two factors from principal component analysis of operating parameters and effluent quality from each plant. The total variance of 84.7%, 79.2% was explained by the two factors at SB plant and SC plant, respectively. The factors were identified at SB plant in the following order 1) the oxidation of organic material by aeration basin microbe,2) biomass in aeration basin and at SC plant 1) the oxidation of organic material by aeration basin microbe, 2) thickening of acti-vated sludge. These results suggested that the control of microbial composition might be critical on the improvement of the effluent quality and plant operating efficiency because most of the factors were related with microbes.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.50 no.6
• /
• pp.279-286
• /
• 2001

A load modeling, micro method, is performed by component load modeling, load composition rate estimation and aggregation of component load model, etc. The load model obtained from this process must be applied to actual load bus to verify it and to get reliable load model. But it is difficult to apply every load bus due to al lot of load buses and complex experiment. This paper proposed the field test method in load bus to verify the load modeling. For appropriate field test, representative load buses are selected by the proposed algorithm considering the composition rate of user category in all load buses. The field tests were performed at selected load buses to obtain load characteristics of bus by time and seasonal without blackout. The results of measurement and analysis are presented in detail.

• Proceedings of the KIEE Conference
• /
• 1999.07c
• /
• pp.1478-1480
• /
• 1999

The accurate analysis of power system requires detailed load model. There are two basic approaches in modeling the load characteristics. One is to directly measure the voltage and frequency sensitivity of the load P and Q at substations and feeders. The other is to build up a composite load model from each load component. Each of these methods has advantages and disadvantages. This paper presents load composition for KEPCO's power system to develop load models by the component-based load modeling.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.1
• /
• pp.89-94
• /
• 1999

The inorganic compositions of traditional lye, and lyes prepared from the stalks of five different agricultural products: beans, wheat, barley, buckwheat and red peppers, were analyzed. Traditional lye was composed mainly of a weak alkaline salt, potassium carbonate as the major component and neutral salts, potassium chloride and potassium sulfate as minor components. The ash and lye contents of buckwheat have significantly higher then those of the rest agricultgural products. Bean and red pepper stalks lyes were composed mainly of potassium carbonate, similar to the composition of traditional lye, but also contained potassium chloride or sulfate. In contrast, postassium chloride was the major component of wheat and barley stalk lye.